Joined: 12 Dec 2007 Posts: 783 Location: Pittsburgh, PA USA
Posted: Wed Feb 14, 2024 23:59 Post subject:
It should also be noted that DD-WRT is beta software. It's always a work in progress, for good or for bad. That having been said, the wdr4300 is a fairly old router, and there isn't a lot of active development going on with the wireless driver. The current builds should work well if you do not require SFE, as it doesn't work well with the K6 builds.
If you're concerned, r53562 uses the old kernel and is considered rather stable. _________________ __________________________
Netgear R7800
DD-WRT v3.0 STD
Linksys WRT1900AC
DD-WRT v3.0 STD
Thank you werry much for greate answer.I didnt know that issue well i know and a cure
But its little old if there is peopels who run ddwrt even from these yeuar 2024 build it should be best.
Wish you a good day sir
Nobody reporting on the device, you not flashing and reporting current releases, it's anyone's guess what's good or bad. _________________ "The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost
"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio
Am not sure what is k6 build.I need good build in fraid of brick than becouse i would use ftp service, than i would like these nice matrix os themes and thats all.
My big scare is of brick sir thats why i set name of topic like that
Joined: 12 Dec 2007 Posts: 783 Location: Pittsburgh, PA USA
Posted: Fri Feb 16, 2024 11:22 Post subject:
Depends on what you're going to do with it. Basic routing and wireless, you should be fine with the current builds If you're doing a more advanced configuration, like wireless repeater or WDS, you can check the build threads for specific known issues affecting multiple routers.
As I said, the wndr4300 is pretty old at this point, so you're unlikely to find too many direct reports on this router, as it's not well used at this point. Search the forums for "wndr4300" and see what comes up. _________________ __________________________
Netgear R7800
DD-WRT v3.0 STD
Linksys WRT1900AC
DD-WRT v3.0 STD
I chosed that router becouse got two usb jacks and to use ftp option for two hdd docks with its own power so no problem is router can power on two hard disks.
I would use wifi 2,4 ghz as backup access point in house and wifi 5,8ghz as one user in small time of day also as backup access point.
I need ftp support for 2 hard disk s all time and wifi small time.
And that what is nice in ui some nice themes if it can.
Becouse i use two wr1043 and use two ip s with wdr4300 tplink i like to use one ip but diffrent sda(or partition name).
All that was posibile as i remember i was using an way i say becouse i was before brick use ok.Now i bought same device and i need stabile firmver in fraid of brick and to run good.
Now am easyer to repeate steps in settings but scare of brick comes of that becouse i cant remember what i was do and brick.
i tryed almost all week and i didnt sucessed, i was do tfpt with tfptd small program and on bootup router pool up firmver but looks he dont write well on router is that bad brick or am bad in debrcik
so i decide to buy same device when i see for ok price for me on yellow pages
i hope if i mess and these router that tftpd way will swap os firmver ok,not like first
I sent you the pogo thread before, but it seems like what it said in it went over your head.
Why do you need dd-wrt? you keep making posts asking how to do this or that or how to unbrick your router. And with all the help we give, you just dont seem to grasp or understand what we are telling you to do.
If you cannot figure our dd-wrt and are going to make posts that say "please help", I am sorry but dd-wrt is just not for you.
Anyone can use this firmware, but using it requires a level of ability, skill, and understanding. Something that you have shown you do not have so far. _________________ For people who are new to the dd-wrt forums >> http://www.catb.org/~esr/faqs/smart-questions.html#rtfm
barryware wrote:
It takes a "community" to raise a router..
Internet Connection 1
Some Techicolor modem > Linksys WRT3200ACM
Internet connection 2
Ubiquiti Powerbeam Gen 2 > Netgear R9000
Official (but not really) dd-wrt General Discussion element/matrix chat
Thank you i bookmarked that web page on chrome, sorry for my bad english.
For two days i will flash wdr4300 tplink router,am not sure is it versio1 but thats most avaible i think it will be, earlyer i cant.Than will arrive to me