Tic
DD-WRT Novice
Joined: 11 Sep 2014
Posts: 2
|
 Posted: Thu Sep 11, 2014 7:21 Post subject: TL-WR840N v1.0 (Broadcom) Bricked |
 |
Please help with restoring firmware.
Tp-Link TL-WR840N Broadcom chip.
Wrong firmware flashed - now bricked.
I connected via Serial cable - Result :
| Code: | Decompressing...done
CFE version 5.100.138.2202 based on BBP 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Thu Aug 29 14:38:19 CST 2013 (tplink@localhost.localdomain)
Copyright (C) 2000-2008 Broadcom Corporation.
Init Arena
Init Devs.
Boot partition size = 131072(0x20000)
Found an ST compatible serial flash with 64 64KB blocks; total size 4MB
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138.2202
CPU type 0x19749: 300MHz
Tot mem: 32768 KBytes
CFE mem: 0x80700000 - 0x80798440 (623680)
Data: 0x8072E260 - 0x807314B0 (12880)
BSS: 0x807314B0 - 0x80732440 (3984)
Heap: 0x80732440 - 0x80796440 (409600)
Stack: 0x80796440 - 0x80798440 (8192)
Text: 0x80700000 - 0x8072E25C (189020)
Device eth0: hwaddr C0-4A-00-46-B1-E8, ipaddr 192.168.0.1, mask 255.255.255.0
gateway not set, nameserver not set
Invalid boot block on disk
flash0.0: Device not found
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: PANIC: out of memory!
raw_fileop_uninit: warning: refcnt not zero
Entry at 0x00000000
Available commands: show, nvram, reboot, flash, batch, go, boot, load, save, ping, arp, ifconfig, help
CFE>
|
Is any way to put original firmware to device ?
| Description: |
| Opened Tp-Link TL-WR840N with Broadcom BCM5357 chip |
|
| Filesize: |
243.74 KB |
| Viewed: |
485 Time(s) |
|
|
|
