Posted: Mon Mar 25, 2024 15:25 Post subject: New Build - 03/25/2024 - r55460
Welcome to Atheros r55460 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Joined: 16 Nov 2015 Posts: 6447 Location: UK, London, just across the river..
Posted: Mon Mar 25, 2024 15:41 Post subject:
Router Model Netgear R7800
Firmware Version DD-WRT v3.0-r55460 std (03/25/24)
Kernel Version Linux 6.1.82 #116 SMP Mon Mar 18 01:32:27 +07 2024 armv7l
update: CLI r55416 > r55460
reset: NO
mode: Gateway/DoT via Entware, AD-Block(via script), IPset Firewall,Forced DNS,AP&Net Isolation,x3VLAN,VPN client(PBR),40 HT 2.4Ghz only(Vanilla)
status: Operational 6h+
errors: after CLI flash reboot command via CLI still hangs...Otherwise, nothing new, yet...Thanks BS and Team !
Router Model Netgear XR500
Firmware Version DD-WRT v3.0-r55460 std (03/25/24)
Kernel Version Linux 6.1.82 #116 SMP Mon Mar 18 01:32:27 +07 2024 armv7l
update: via WEB interface (stock 2.3.2.40) > factory.to.ddwrt r55416 > via CLI r55460
reset: YES (on stock, on factory image, on the last update.bin (55460))
mode: Gateway/DoH via SmartDNS, AD-Block(via script), IPset Firewall, Forced DNS,AP&Net Isolation,x4VLAN, VPN client(PBR),40 HT 2.4Ghz only(Vanilla)
status: Operational 2h+
errors: Nothing new, yet just flashed it from stock to DDWRT and still testing, will post later if something odd happens...
so, far reboot after flash, still ends with...oddity
and this is on clear flashed device, no settings....I had a believe, reset and manual rebuild, will help with that reboot issue, but nope...luckily magic number code for CLI reboot still works...
Thanks BS and Team ! _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Last edited by Alozaros on Tue Mar 26, 2024 18:03; edited 2 times in total
Joined: 30 Jun 2014 Posts: 61 Location: California
Posted: Mon Mar 25, 2024 20:57 Post subject:
whitebeard wrote:
Quote:
Doesn't seem to be natively part of DDWRT.
Thank you for your reply, but at least for the Netgear XR500, htop was part of the standard package until sometime after the 55109 release. I did not add it from Optware or Entware.
It was native on the R7800 but not the EA8500 (I had to add it).
Here is my R7800 w/r53562
Code:
# which htop
/usr/sbin/htop
It's also native on my R6400v2. _________________ Linksys EA8500 (Internet Gateway, AP/VAP) - DD-WRT r53562
Features in use: WDS-AP, Multiple VLANs, Samba, WireGuard, Entware: mqtt, mlocate
Wireless 5ghz only
Netgear R7800 (WDS-AP, WAP, VAP) - DD-WRT r55779
Features in use: multiple VLANs over single trunk port
Linksys EA8500 WDS Station x2 - DD-WRT r55799
Netgear R6400v2 WAP, VAP 2.4ghz only w/VLANs over single trunk port. DD-WRT r55779
OSes: Fedora 38, 9 RPis (2,3,4,5), 20 ESP8266s: Straight from Amiga to Linux in '94, never having owned a Windows PC.
Joined: 16 Nov 2015 Posts: 6447 Location: UK, London, just across the river..
Posted: Tue Mar 26, 2024 7:11 Post subject:
i guess htop was removed/screwed on the recent builds, for the record my R7000 still has it...but my R7800 doesn't so, i had to install it over entware _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Last edited by Alozaros on Tue Mar 26, 2024 9:26; edited 1 time in total
Joined: 12 Dec 2007 Posts: 783 Location: Pittsburgh, PA USA
Posted: Tue Mar 26, 2024 20:28 Post subject:
Router/Version: Netgear R7800 x 3
File/Kernel: DD-WRT v3.0-r55460 std (03/25/24)
Previous/Reset: DD-WRT v3.0-r55416 std (03/19/24), last reset at 54905
Mode/Status: Gateway (SFE disabled), Access Point (DD-WRT firmware,2.4GHz, 5GHZ, WPA2/WPA3, 802.11r/v/k), IPV6 (DHCP6 w/ prefix delegation), Entware, DOT via SmartDNS/DNSMasq, OpenVPN server, Wireguard Server + 2 wired access points (DD-WRT firmware,2.4GHz, 5GHZ, WPA2/WPA3, 802.11r/v/k)
Issues/Errors:
Up 6 hours. USB 3.0 working properly for Entware and "jffs" partitions. Wireguard and OpenVPN servers working as expected and throughput sufficient to open video files on network shares. Speed (tested via nPerf.com) is very close to published, both wired and wireless, which is equal or favorable to the ISP router. SFE remains disabled due to random reboots. Router LAN lights are working.
Rebooted this morning due to power blink, otherwise it would have been up more than 24 hours. So far so good.
)