Problem with a WRT160N and DD-WRT update

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
doberk
DD-WRT Novice


Joined: 07 Jan 2011
Posts: 5

PostPosted: Fri Jan 07, 2011 12:40    Post subject: Problem with a WRT160N and DD-WRT update Reply with quote
Hi all, I tell them my problem and see if anyone can help me.

I upgrade a WRT160N 1.0 with DD-WRT V24 and now It doesn´t respond to 192.168.1.1. The power light is on, no blinking. This is what I did:

1 - I did a hard reset 30/30/30
2 - I went to 192.168.1.1 and I updated the firmware
3 - After completing the update and turned off the router I went back to access 192.168.1.1. At this point the router worked perfectly. I changed Root password and navigate the DD-WRT software without problems.

4 - According to the tutorial is needed to do a 30/30/30 reset before and AFTER upgrading. I did the reset 30/30/30 after the update and the router stopped working.

Now the power light is on, no blinking, but the wifi light is off. It doesn´t respond at 192.168.1.1 and dhcp doesn´t work. I tried to reset again with the 30/30/30 method, I tried to enter recovery mode...

Any idea why this has happened and how to solve?
Sponsor
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum