- VINT: vintage build (old driver), works on any router but 5354 based
- NEWD: new driver with multi bssid support, works on any router but 4702 (4710) based
- SF: build for routers with serial flash chip, e.g. Belkin v2000.
- WRH54G: build only for Linksys WRH54G router
General rules: if you have old router with 4702 (4710) cpu and mini-pci
radio, you MUST use VINT build, if you have 5354 based router, you must
use NEWD build. All other routers can run both (VINT or NEWD) builds.
Moto WR800G v1 uses Broadcom 4702 then VINTage is a must for this device.
Moto WR800G v2-3 uses Broadcom 4712 then Vintage is optional and NEWD should work.
I would use standard build. If flash space is needed then go for nokaid. Finally if you will use Voice over IP then use that build.