Author
Message
Alig83 DD-WRT Novice Joined: 27 Oct 2008 Posts: 32
Posted: Tue Oct 28, 2008 12:11 Post subject:
Has seen a mention about 330ge in support list.
At it it is exact:
Broadcom5354 rev2@240
ram 16 mb
flash 4 mb
WLAN standard b/g
Ethernet port 1 wan
Voltage Input 5v
In an hour I will try once again this firmware
Back to top
Sponsor
Alig83 DD-WRT Novice Joined: 27 Oct 2008 Posts: 32
Posted: Tue Oct 28, 2008 16:28 Post subject:
Firmware works!!! Thanks!
Back to top
Eko DD-WRT Developer/Maintainer Joined: 07 Jun 2006 Posts: 5771
Posted: Tue Oct 28, 2008 16:35 Post subject:
Alig83 wrote: Firmware works!!! Thanks!
Now find gpio for reset button and gpios for leds.
Back to top
Alig83 DD-WRT Novice Joined: 27 Oct 2008 Posts: 32
Posted: Tue Oct 28, 2008 16:46 Post subject:
[quote="Eko"] Alig83 wrote: Now find gpio for reset button and gpios for leds.
If write as, without problems.
Back to top
Eko DD-WRT Developer/Maintainer Joined: 07 Jun 2006 Posts: 5771
Back to top
Alig83 DD-WRT Novice Joined: 27 Oct 2008 Posts: 32
Posted: Tue Oct 28, 2008 17:21 Post subject:
I can not it will be connected telnet. Writes that at me a login not the correct.
Back to top
Eko DD-WRT Developer/Maintainer Joined: 07 Jun 2006 Posts: 5771
Posted: Tue Oct 28, 2008 17:41 Post subject:
Alig83 wrote: I can not it will be connected telnet. Writes that at me a login not the correct.
root/your_password
Back to top
Alig83 DD-WRT Novice Joined: 27 Oct 2008 Posts: 32
Posted: Tue Oct 28, 2008 17:53 Post subject:
gpio poll 8
Led`s all burn. Has made gpio disable from 1 to 8, they have not gone out.
Back to top
Sash DD-WRT Guru Joined: 20 Sep 2006 Posts: 17619 Location: Hesse/Germany
Posted: Tue Oct 28, 2008 18:08 Post subject:
reset button is more important
Alig83 wrote: Has seen a mention about 330ge in support list.
At it it is exact:
Broadcom5354 rev2@240
ram 16 mb
flash 4 mb
WLAN standard b/g
Ethernet port 1 wan
Voltage Input 5v
In an hour I will try once again this firmware
add it yourself plz _________________Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
Back to top
Alig83 DD-WRT Novice Joined: 27 Oct 2008 Posts: 32
Posted: Wed Oct 29, 2008 6:35 Post subject:
In firmware from Oleg, router on dhcp received all route, and here what that a problem.
From Oleg:
Destination Gateway Genmask Flags Metric Ref Use Iface
81.20.168.10 10.17.0.1 255.255.255.255 UGH 1 0 0 WAN eth0
81.20.169.10 10.17.0.1 255.255.255.255 UGH 1 0 0 WAN eth0
81.20.169.75 10.17.0.1 255.255.255.255 UGH 1 0 0 WAN eth0
81.20.169.76 * 255.255.255.255 H 0 0 0 WAN ppp0
192.168.1.0 * 255.255.255.0 U 0 0 0 LAN br0
10.17.0.0 * 255.255.0.0 U 0 0 0 WAN eth0
10.0.0.0 10.17.0.1 255.0.0.0 UG 1 0 0 WAN eth0
default 81.20.169.76 0.0.0.0 UG 0 0 0 WAN ppp0
default 10.17.0.1 0.0.0.0 UG 1 0 0 WAN eth0
DD-WRT:
192.168.1.1 255.255.255.255 10.17.0.1 WAN
81.20.168.10 255.255.255.255 10.17.0.1 WAN
81.20.174.200 255.255.255.255 0.0.0.0 ppp0
81.20.169.10 255.255.255.255 10.17.0.1 WAN
81.20.169.75 255.255.255.255 10.17.0.1 WAN
192.168.1.0 255.255.255.0 0.0.0.0 LAN & WLAN
10.17.0.0 255.255.0.0 0.0.0.0 WAN
169.254.0.0 255.255.0.0 0.0.0.0 LAN & WLAN what this?
0.0.0.0 0.0.0.0 81.20.174.200 ppp0
Back to top
altruist DD-WRT Novice Joined: 04 Jun 2009 Posts: 1
Posted: Thu Jun 04, 2009 7:49 Post subject: wl-330gE
I have the Asus WL-330gE, the modified firmware here seems to work pretty well..
except for one detail:
It doesn't work in AP mode. It broadcasts about 2-3 packets and then it stops.
Thanks
Back to top
dvlad666 DD-WRT Novice Joined: 03 Feb 2009 Posts: 47
Posted: Sat Jun 06, 2009 8:31 Post subject: Re: wl-330gE
I'm also using WL-330Ge with dd-wrt and no problem.
altruist wrote: It doesn't work in AP mode.
Have you tried enabling "Assign WAN port to switch" checkbox? If you want to use it as a plain AP, try switching golbal mode to _don't_remember_ but not Gateway. That should disable routing and put all ports (LAN and Wi-FI) together in the bridge.
Back to top
Sash DD-WRT Guru Joined: 20 Sep 2006 Posts: 17619 Location: Hesse/Germany
Posted: Sat Jun 06, 2009 9:28 Post subject: Re: wl-330gE
altruist wrote: I have the Asus WL-330gE, the modified firmware here seems to work pretty well..
except for one detail:
It doesn't work in AP mode. It broadcasts about 2-3 packets and then it stops.
Thanks
read the wiki faq (reset) _________________Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
Back to top
echowrld DD-WRT Novice Joined: 27 Jun 2009 Posts: 2
Posted: Sat Jun 27, 2009 17:34 Post subject:
Thank you for the info for loading dd-wrt on Asus WL-330gE. I have loaded DD-WRT v24-sp2 (06/17/09) mini - build 12307M NEWD Eko , but the problem is that the "reset" button does not work.
Here is what I got for detecting reset button:
gpio 2:
pressed = 00
unpressed = 01
Can someone suggest which build that has the reset button works?
Thank you
Back to top
Sash DD-WRT Guru Joined: 20 Sep 2006 Posts: 17619 Location: Hesse/Germany
Back to top