Sorry 4 beeing a noob but will this offer any imprevent to WPA/ wpa2 problems of the ASUS or might make things worse? I'm interested in basic repater stuff
I tired a startup script that would correctly assign the WAN port to eth0. I'm close but still having issues. So far I've got:
Code:
brctl delif br0 eth0
nvram set wan_ifname2=eth0
nvram set wan_ifnames=eth0
nvram set wan_ifname=eth0
nvram set wan_iface=eth0
It seems to set most things, but in the end, still doesn't work properly. Any help would be appreciated.
I found that if I use the following as my startup script, everything runs fine:
Code:
nvram set wan_ifname=eth0
brctl delif br0 eth0
startservice wan
I put this into startup script and now my router does not respond on either wired or wireless. Did I get trolled? How do I reset to defaults or reflash?
I want to be able to use the ethernet port to connect a computer that does not have wireless to the internet through the router that is set as a repeater. Can anyone give me some idea how to set this?
I have not fully tested it, I have only tested it for my own purposes. I do not use these devices for routers as many do. I use them to convert wired devices only into a wireless device.
The only downside is that development tree seems to be no longer supported, so this might very well be the last build supported for the WL-330gE.
Posted: Sun Mar 25, 2018 9:34 Post subject: asus wl-330ge problem
hi
i whant to install wrt but when finished upload i have this problem
"Firmware upgrading fails. It may result from incorrect image or error transmission. Please check the version of firmare and try again. System will reboot now."