Metallicaman DD-WRT Novice
Joined: 10 Aug 2008 Posts: 1
|
Posted: Sun Aug 10, 2008 19:07 Post subject: trouble getting DNS in client-bridge mode |
|
Here is my setup.
Host Router - 192.168.1.1 Linsys WRT54G2 - stock firmware (i dont believe dd-wrt works on this)
Client Router - 192.168.1.2 Linsys WRT54GL v1.1 dd-wrt v24
I follwed the instructions on setting up the client-bridge exactly.
Now the routers are connecting fine, but the problem is im not getting an IP or DNS info from the host router for my client computers.
I can log onto the client router from a computer on the host router. Also on the client router I can see all the DNS information for my ISP.
my client computer has windows XP, yesterday after restarting the routers a couple times it was able to connect with auto IP settings and get on the internet.
ever since I restarted the computer I havent been able to get it ot connect. The only thing that works is to set the computers IP to static and hard code in the DNS servers.
I tried it with DHCP enabled and disabled on the client router and it still wont work.
I know this should work because Ive done it with a WRT54G and WRT54GL before and pretty much everything is setup the same.
Any ideas on what might be the problem? |
|