Posted: Fri Aug 29, 2008 14:12 Post subject: Port 80 Forwarding for Web Server
I have v24 sp1
WRT54GL v1.1
I can forward other ports, but i cannot get port 80 to forward. Even if i set myself as DMZ i cannot access port 80 from remote locations. Is there a setting that is blocking this? i cant seem to find it...
Please help. i am trying to run a simple web server using ddns and a domain...
Posted: Fri Aug 29, 2008 14:31 Post subject: Re: Port 80 Forwarding for Web Server
jwagman1 wrote:
I have v24 sp1
WRT54GL v1.1
I can forward other ports, but i cannot get port 80 to forward. Even if i set myself as DMZ i cannot access port 80 from remote locations. Is there a setting that is blocking this? i cant seem to find it...
Please help. i am trying to run a simple web server using ddns and a domain...
Your ISP might be blocking port 80 because of that reason. Try changing your web server port to 81 or 8080 _________________ блог путешественника
I'm not sure about whatever DNS server you have, but I've tried to modify my Domain Address to redirect to the port (thegreendonkey.com = thegreendonkey.com:8080) and I never WAS able to get it to work properly,I always either got redirected wrong, or got errors.
My DNS service was Zoneedit.
That was a while back when I was living at a friends house, during that time, I transferred my site over to www.freehostia.com their servers are extremely slow(I get a Time out half the time I visit my site) BUT they give you full MySQL annd PHP with a CPanel to boot.
I've now moved to my new place so I'm at work getting my server back up.
hi, I have same problem and I can't resolve it.
My DD-WRT is :
Firmware: DD-WRT v24-sp1 (07/27/0 vpn
Y create an account in DynDns.Org, named machado.go.dyndns.org
I have a PC with XAMPP runnig a simple php application, when I was with the original firmware it works fine, but after I flash dd-wrt it didn't work anymore.
The PC have a Dinamic IP, but I'm sure it dosen't change.
If I test open ports from the internet, I have no ports opened !?!?!
You need to reset the router to defaults after upgrade. Then it will work so long as you configure it right.
Sorry that I didn't tell.
I'm running DD-WRT from 4 month ago, since that I never check the application.
I firt use "Port Range Fordwarding" and the I change to "Port Forwarding".
This is my last DDNS Status from today:
Fri Sep 19 09:24:22 2008: I:INADYN: Alias 'maxxxdo.go.dyndns.org' to IP '190.xxx.xxx.142' updated successfully.
I test the domain with WhatsMyIp.org and port 80 is closed or timeout.
Can I see how the router open the port?
Or any log ??
Best Regards