Is it just me or rebooting from dd-wrt's web interface does not work properly, the router will hang on reboot and have to be physically rebooted. (rev C2 btw)
Same for me, on all build except 2012 year, where wifi not work dont want reboot. just freeze with yellow led
Is it just me or rebooting from dd-wrt's web interface does not work properly, the router will hang on reboot and have to be physically rebooted. (rev C2 btw)
Same for me, on all build except 2012 year, where wifi not work dont want reboot. just freeze with yellow led
Same here. C1. Anybody know how to fix this reboot issue?
Posted: Thu Nov 14, 2013 17:13 Post subject: Settings Not Clear Reinstalling From Recovery
I used DD-WRT firmware for a while, and had disabled soft reset for security. However, when the password was lost I resorted to a hard reset using the recovery mode. Reloading and soft-resetting the original firmware works. However, reinstalling DD-WRT restoring some or all of my old DD-WRT configuration. This locks me out again, and prevents soft resetting.
30-30-30 reset does not behave any differently than the hard reset/recovery mode.
Anyone know how to clear the settings for the DD-WRT firmware without soft-reset or access to it's admin mode?
Latest builds for DIR-615 (12-12-2013-r23082, 12-17-2013-r23138, 12-22-2013-r23194, 12-24-2013-r23204) contains bugs - WiFi connection brakes after 30 min-hour
So I have to use build 22118...
Posted: Sat Jan 11, 2014 16:10 Post subject: Power light amber?
I installed DD-WRT on the DIR-615 (rev i1) I just received, and it works just fine, but I'm curious about one thing. It seems to me that with the stock D-Link firmware the power light was amber while it was booting up, and then turned green. With DD-WRT it stays amber. Is that normal?
Posted: Sun Jan 26, 2014 16:07 Post subject: firmware upgrade keeps failing
UPDATE. Nevermind, I figured out what I was doing wrong. I never turned off "MANUAL IP" and didn't go back to Autoconfigure IP address. Just worked fine using emergency mode option from this post :
http://www.dd-wrt.com/phpBB2/viewtopic.php?p=441247#441247
I have a DIR-615 C1. It was previously installed with 3.01 firmware and I could not load the DD-WRT factory to ddwrt BIN file. I did all the steps and waited the 120 seconds or so it said, actually longer, but once it uploaded the ddwrt file it just bricked it. I did a 30-30-30 reset and it brings me to this screen every time :
If I choose a DLINK Firmware file I can update to whatever version I want. I have tried it with 3.01 and 3.10 They all update it fine and I can get back into the DLINK admin panel, but whenever I goto update with ddwrt it just bricks it.
I have also tried uploading the ddwrt file from the screen when its bricked (below screen shot)
What am I doing wrong or missing here?
Having a really odd issue. My router is C1 according to the bottom. However, I cannot upload any new firmware of any kind. Tried both DD-WRT and standard DLINK firmwares and neither will work.
Have tried uploading via the standard firmware upgrade path and emergency mode.
by "tail", I mean the last few visible characters when I use the Windows 'NotePad' application to open the file, and to view the last few visible characters.
I noticed the following about the "official" firmware offered by D-LINK:
Posted: Wed Apr 02, 2014 0:26 Post subject: Can't update Rev C2 no matter what
Hi, everyone so I've cracking my head trying to solve this: I jus can't update my router neither the official firmware or the DD-Wrt one are working, I've been trying to use the edited version from a 2010 post, no success either, neither the defaut update page or the recovery mode page are working, tboth of them give the same error message, that the firmware chosen isn't the right one for the hardware version.
HELP
My router is the DIR-615 C2
BTW: Sorry for the bad english