Joined: 07 Jun 2006 Posts: 1488 Location: the Netherlands
Posted: Wed Sep 17, 2008 18:33 Post subject: [CRITICAL] Dead loop on virtual device br0
Today I upgraded to DD-WRT v24-sp2 09/17/08 std
(SVN revision 10395M NEWD Eko) but when I start transfering files from wireles to a wired computer (or the other way around) I'm getting these messages:
Code:
<10>Sep 17 20:32:26 kernel: Dead loop on virtual device br0, fix it urgently!
The I downgraded to DD-WRT v24-sp1 07/27/08 std
(SVN revision 10011) and the forward problem is resolved but the dead loop messages keep popping up. What could this be? I do have an extra vlan but that one isn't bridged to br0.
Code:
root@WRT_CYBERDE:~# brctl show
bridge name bridge id STP enabled interfaces
br0 8000.0014bfb23a1e yes vlan0
eth1
tap0
br1 8000.0014bfb23a1e yes vlan2
Anyone with the same problems? _________________ Firmware: DD-WRT v24-sp2 (latest available) mega
WRT320N
Donater
Last edited by cyberde on Fri Sep 26, 2008 18:38; edited 2 times in total
Joined: 07 Jun 2006 Posts: 1488 Location: the Netherlands
Posted: Fri Sep 19, 2008 13:25 Post subject:
Anyone???
Still happening when copying files over wireless to a computer that is connected with a wire. _________________ Firmware: DD-WRT v24-sp2 (latest available) mega
WRT320N
Joined: 07 Jun 2006 Posts: 1488 Location: the Netherlands
Posted: Sat Sep 27, 2008 12:05 Post subject:
After having to recover from a bad flash (through webgui ) I finally flashed it to the last build.
But, the problem isn't resolved. I suggest someone else have a look at this too. I'm using wallwatcher for real time monitoring. _________________ Firmware: DD-WRT v24-sp2 (latest available) mega
WRT320N
Posted: Wed Oct 22, 2014 4:46 Post subject: Dead loop
This is a problem with everyone's firmware working with this router. I haven't heard of one person using this router who isn't getting this error in their syslog.