Author
Message
Nachtigall77 DD-WRT Novice Joined: 10 Mar 2012 Posts: 9
Posted: Thu Jun 07, 2012 11:47 Post subject:
No
Back to top
Sponsor
Nachtigall77 DD-WRT Novice Joined: 10 Mar 2012 Posts: 9
Posted: Sat Jun 09, 2012 4:42 Post subject:
06-08-12-r19342 - wi-fi still not working on our device
Back to top
LOM DD-WRT Guru Joined: 28 Dec 2008 Posts: 7647
Posted: Sat Jun 09, 2012 5:34 Post subject:
"doesn't work" does not count as an error report.
Lots of post about it and no one has given the output from dmesg after a reboot. _________________ Kernel panic: Aiee, killing interrupt handler!
Back to top
Nachtigall77 DD-WRT Novice Joined: 10 Mar 2012 Posts: 9
Posted: Sat Jun 09, 2012 9:53 Post subject:
LOM wrote: "doesn't work" does not count as an error report.
Lots of post about it and no one has given the output from dmesg after a reboot.
<5>Linux version 3.2.19-svn19334 (root@dd-wrt) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1018 Fri Jun 8 11:22:40 CEST 2012
<7>prom: fw_arg0=00000001, fw_arg1=0bbf3fb0, fw_arg2=0bbf43b0, fw_arg3=00000000
<7>argv[0]= (null) is invalid, skipping
<7>env[0]: memsize=32
<7>env[1]: initrd_start=0x00000000
<7>env[2]: initrd_size=0x0
<7>env[3]: flash_start=0xBC400000
<7>env[4]: flash_size=0x400000
<7>env[0]: memsize=32
<7>env[1]: initrd_start=0x00000000
<7>env[2]: initrd_size=0x0
<7>env[3]: flash_start=0xBC400000
<7>env[4]: flash_size=0x400000
<6>bootconsole [early0] enabled
<6>CPU revision is: 0001906c (MIPS 4KEc)
<6>Ralink RT2880 id:2 rev:1 running at 266.66 MHz
<6>Determined physical RAM map:
<6> memory: 02000000 @ 08000000 (usable)
<6>Wasting 1048576 bytes for tracking 32768 unused pages
<4>Zone PFN ranges:
<4> Normal 0x00008000 -> 0x0000a000
<4>Movable zone start PFN for each node
<4>early_node_map[1] active PFN ranges
<4> 0: 0x00008000 -> 0x0000a000
<7>On node 0 totalpages: 8192
<7>free_area_init_node: node 0, pgdat 88276a90, node_mem_map 882e1000
<7> Normal zone: 64 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 8128 pages, LIFO batch:0
<7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>pcpu-alloc: [0] 0
<4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
<5>Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock4 rootfstype=squashfs noinitrd
<6>PID hash table entries: 128 (order: -3, 512 bytes)
<6>Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
<4>Primary instruction cache 16kB, VIPT, 4-way, linesize 16 bytes.
<4>Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 16 bytes
<6>Memory: 29500k/32768k available (2131k kernel code, 3268k reserved, 392k data, 156k init, 0k highmem)
<6>NR_IRQS:48
<6>console [ttyS1] enabled, bootconsole disabled
<6>Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
<6>pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 512
<6>NET: Registered protocol family 16
<6>bio: create slab at 0
<6>Switching to clocksource MIPS
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>TCP established hash table entries: 1024 (order: 1, 8192 bytes)
<6>TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
<6>TCP: Hash tables configured (established 1024 bind 1024)
<6>TCP reno registered
<6>UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>NET: Registered protocol family 1
<6>squashfs: version 3.0 (2006/03/15) Phillip Lougher
<6>msgmni has been set to 57
<6>io scheduler noop registered
<6>io scheduler deadline registered (default)
<6>Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
<6>serial8250: ttyS0 at MMIO 0x300500 (irq = 10) is a 16550A
<6>serial8250: ttyS1 at MMIO 0x300c00 (irq = 16) is a 16550A
<4>Ralink gpio driver initialized
<4>spidrv_major = 217
<6>system type: RT2880
<6>boot type: 0
<5>ralink flash device: 0x400000 at 0xbf000000
<6>Ralink SoC physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022a8
<6>Amd/Fujitsu Extended Query Table at 0x0040
<6> Amd/Fujitsu Extended Query version 1.1.
<5>number of CFI chips: 1
<0>
<0>found squashfs at 131000
<5>Creating 6 MTD partitions on "Ralink SoC physically mapped flash":
<5>0x000000000000-0x000000030000 : "uboot"
<5>0x000000030000-0x000000040000 : "uboot-config"
<5>0x000000040000-0x000000050000 : "factory-defaults"
<5>0x000000050000-0x0000003e0000 : "linux"
<5>0x000000131000-0x0000003e0000 : "rootfs"
<4>mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
<5>0x0000003e0000-0x0000003f0000 : "nvram"
<6>tun: Universal TUN/TAP device driver, 1.6
<6>tun: (C) 1999-2004 Max Krasnyansky
<6>PPP generic driver version 2.4.2
<6>PPP BSD Compression module registered
<6>PPP Deflate Compression module registered
<6>NET: Registered protocol family 24
<6>Ralink APSoC Hardware Watchdog Timer
<6>u32 classifier
<6> Actions configured
<6>Netfilter messages via NETLINK v0.30.
<6>nf_conntrack version 0.5.0 (460 buckets, 1840 max)
<6>ctnetlink v0.93: registering with nfnetlink.
<6>IPv4 over IPv4 tunneling driver
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>IPP2P v0.8.2 loading
<6>ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
<6>TCP bic registered
<6>TCP cubic registered
<6>TCP westwood registered
<6>TCP highspeed registered
<6>TCP hybla registered
<6>TCP htcp registered
<6>TCP vegas registered
<6>TCP scalable registered
<6>NET: Registered protocol family 17
<5>Bridge firewalling registered
<6>8021q: 802.1Q VLAN Support v1.8
<6>searching for nvram
<6>nvram size = 0
<0>initialize Realtek VLAN config
<4>MAC_ADRH -- : 0x00000000
<4>MAC_ADRL -- : 0x00000000
<4>Ralink APSoC Ethernet Driver Initilization. v2.0 256 rx/tx descriptors allocated, mtu = 1500!
<4>NAPI enable, Tx Ring = 256, Rx Ring = 256
<4>MAC_ADRH -- : 0x0000000c
<4>MAC_ADRL -- : 0x43288001
<6>VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
<6>Freeing unused kernel memory: 156k freed
<4>rt2860v2_ap: module license 'unspecified' taints kernel.
<4>Disabling lock debugging due to kernel taint
<4>MAC_ADRH -- : 0x0000000c
<4>MAC_ADRL -- : 0x43288038
<4>
<4>phy_tx_ring = 0x091b1000, tx_ring = 0xa91b1000
<4>
<4>phy_rx_ring0 = 0x091b2000, rx_ring0 = 0xa91b2000
<4>CDMA_CSG_CFG = 81000000
<4>GDMA1_FWD_CFG = 10000
<6>device vlan1 entered promiscuous mode
<6>device eth2 entered promiscuous mode
<6>br0: port 1(vlan1) entering forwarding state
<6>br0: port 1(vlan1) entering forwarding state
<4>RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!
<4>0x1300 = 00064380
<4>0x1300 = 00064380
<6>device ra0 entered promiscuous mode
<6>br0: port 2(ra0) entering forwarding state
<6>br0: port 2(ra0) entering forwarding state
<6>br0: port 1(vlan1) entering forwarding state
<6>device vlan2 entered promiscuous mode
<6>device vlan2 left promiscuous mode
<6>br0: port 2(ra0) entering forwarding state
Back to top
Nachtigall77 DD-WRT Novice Joined: 10 Mar 2012 Posts: 9
Posted: Tue Jun 12, 2012 8:50 Post subject:
any suggestions?
Back to top
Blackmore DD-WRT Novice Joined: 18 Nov 2010 Posts: 3
Posted: Thu Jul 12, 2012 10:16 Post subject:
And silence...
DD-WRT Guru, where are you?
I can not to believe, that no one can't fix current problems firmware!
Perhaps something can accelerate the solution of problems of the router?
Back to top
_Cyber_ DD-WRT Novice Joined: 09 Jan 2012 Posts: 21
Posted: Mon Jul 23, 2012 20:44 Post subject: r19519
Does wifi work on r19519 ?
Back to top
Nachtigall77 DD-WRT Novice Joined: 10 Mar 2012 Posts: 9
Posted: Tue Jul 24, 2012 3:35 Post subject:
No
Back to top
Some0neElse DD-WRT Novice Joined: 22 Mar 2011 Posts: 10
Posted: Mon Sep 03, 2012 17:03 Post subject:
Any news about wi-fi on bilds over 18007?
Back to top
calinm DD-WRT Novice Joined: 19 Sep 2012 Posts: 1
Posted: Wed Sep 19, 2012 22:39 Post subject: dmesg output from r19519 on RT-N15
Hi,
Below is the dmesg output from ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2012/07-20-12-r19519/Asus-RT-N15/
The radio does not seem to work. "Site survey" shows nothing and I can't see the SSID from other devices. If you need other info about my router that may help you fix this, please let me know.
Thanks,
Calin
DD-WRT v24-sp2 std (c) 2012 NewMedia-NET GmbH
Release: 07/20/12 (SVN revision: 19519)
root@rtn15:~# dmesg
<5>Linux version 3.2.23-svn19518 (root@dd-wrt) (gcc version 4.6.3 20120201 (prer elease) (Linaro GCC 4.6-2012.02) ) #1373 Fri Jul 20 13:35:53 CEST 2012
<7>prom: fw_arg0=00000001, fw_arg1=0bbf3fb0, fw_arg2=0bbf43b0, fw_arg3=00000000
<7>argv[0]= (null) is invalid, skipping
<7>env[0]: memsize=32
<7>env[1]: initrd_start=0x00000000
<7>env[2]: initrd_size=0x0
<7>env[3]: flash_start=0xBC400000
<7>env[4]: flash_size=0x400000
<7>env[0]: memsize=32
<7>env[1]: initrd_start=0x00000000
<7>env[2]: initrd_size=0x0
<7>env[3]: flash_start=0xBC400000
<7>env[4]: flash_size=0x400000
<6>bootconsole [early0] enabled
<6>CPU revision is: 0001906c (MIPS 4KEc)
<6>Ralink RT2880 id:2 rev:1 running at 266.66 MHz
<6>Determined physical RAM map:
<6> memory: 02000000 @ 08000000 (usable)
<6>Wasting 1048576 bytes for tracking 32768 unused pages
<4>Zone PFN ranges:
<4> Normal 0x00008000 -> 0x0000a000
<4>Movable zone start PFN for each node
<4>early_node_map[1] active PFN ranges
<4> 0: 0x00008000 -> 0x0000a000
<7>On node 0 totalpages: 8192
<7>free_area_init_node: node 0, pgdat 88276ac0, node_mem_map 882e1000
<7> Normal zone: 64 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 8128 pages, LIFO batch:0
<7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>pcpu-alloc: [0] 0
<4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
<5>Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock4 rootfstype=sq uashfs noinitrd
<6>PID hash table entries: 128 (order: -3, 512 bytes)
<6>Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
<4>Primary instruction cache 16kB, VIPT, 4-way, linesize 16 bytes.
<4>Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 16 bytes
<6>Memory: 29500k/32768k available (2132k kernel code, 3268k reserved, 391k data , 156k init, 0k highmem)
<6>NR_IRQS:48
<6>console [ttyS1] enabled, bootconsole disabled
<6>Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
<6>pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 512
<6>NET: Registered protocol family 16
<6>bio: create slab <bio-0> at 0
<6>Switching to clocksource MIPS
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>TCP established hash table entries: 1024 (order: 1, 8192 bytes)
<6>TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
<6>TCP: Hash tables configured (established 1024 bind 1024)
<6>TCP reno registered
<6>UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>NET: Registered protocol family 1
<6>squashfs: version 3.0 (2006/03/15) Phillip Lougher
<6>msgmni has been set to 57
<6>io scheduler noop registered
<6>io scheduler deadline registered (default)
<6>Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
<6>serial8250: ttyS0 at MMIO 0x300500 (irq = 10) is a 16550A
<6>serial8250: ttyS1 at MMIO 0x300c00 (irq = 16) is a 16550A
<4>Ralink gpio driver initialized
<4>spidrv_major = 217
<6>system type: RT2880
<6>boot type: 0
<5>ralink flash device: 0x400000 at 0xbf000000
<6>Ralink SoC physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank . Manufacturer ID 0x0000c2 Chip ID 0x0022a8
<6>Amd/Fujitsu Extended Query Table at 0x0040
<6> Amd/Fujitsu Extended Query version 1.1.
<5>number of CFI chips: 1
<0>
<0>found squashfs at 132000
<5>Creating 6 MTD partitions on "Ralink SoC physically mapped flash":
<5>0x000000000000-0x000000030000 : "uboot"
<5>0x000000030000-0x000000040000 : "uboot-config"
<5>0x000000040000-0x000000050000 : "factory-defaults"
<5>0x000000050000-0x0000003e0000 : "linux"
<5>0x000000132000-0x0000003e0000 : "rootfs"
<4>mtd: partition "rootfs" must either start or end on erase block boundary or b e smaller than an erase block -- forcing read-only
<5>0x0000003e0000-0x0000003f0000 : "nvram"
<6>tun: Universal TUN/TAP device driver, 1.6
<6>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>PPP generic driver version 2.4.2
<6>PPP BSD Compression module registered
<6>PPP Deflate Compression module registered
<6>NET: Registered protocol family 24
<6>Ralink APSoC Hardware Watchdog Timer
<6>u32 classifier
<6> Performance counters on
<6> Actions configured
<6>Netfilter messages via NETLINK v0.30.
<6>nf_conntrack version 0.5.0 (460 buckets, 1840 max)
<6>ctnetlink v0.93: registering with nfnetlink.
<6>IPv4 over IPv4 tunneling driver
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>IPP2P v0.8.2 loading
<6>ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
<6>TCP bic registered
<6>TCP cubic registered
<6>TCP westwood registered
<6>TCP highspeed registered
<6>TCP hybla registered
<6>TCP htcp registered
<6>TCP vegas registered
<6>TCP scalable registered
<6>NET: Registered protocol family 17
<5>Bridge firewalling registered
<6>8021q: 802.1Q VLAN Support v1.8
<6>searching for nvram
<6>nvram size = 0
<0>initialize Realtek VLAN config
<4>MAC_ADRH -- : 0x00000000
<4>MAC_ADRL -- : 0x00000000
<4>Ralink APSoC Ethernet Driver Initilization. v2.0 256 rx/tx descriptors alloc ated, mtu = 1500!
<4>NAPI enable, Tx Ring = 256, Rx Ring = 256
<4>MAC_ADRH -- : 0x0000000c
<4>MAC_ADRL -- : 0x43288064
<6>VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
<6>Freeing unused kernel memory: 156k freed
<4>rt2860v2_ap: module license 'unspecified' taints kernel.
<4>Disabling lock debugging due to kernel taint
<4>MAC_ADRH -- : 0x000090e6
<4>MAC_ADRL -- : 0xba7431a3
<4>
<4>phy_tx_ring = 0x091a7000, tx_ring = 0xa91a7000
<4>
<4>phy_rx_ring0 = 0x091a8000, rx_ring0 = 0xa91a8000
<4>CDMA_CSG_CFG = 81000000
<4>GDMA1_FWD_CFG = 10000
<6>device vlan1 entered promiscuous mode
<6>device eth2 entered promiscuous mode
<6>br0: port 1(vlan1) entering forwarding state
<6>br0: port 1(vlan1) entering forwarding state
<4>RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!
<6>br0: port 1(vlan1) entering forwarding state
<4>0x1300 = 00064380
<4>0x1300 = 00064380
<6>device ra0 entered promiscuous mode
<6>br0: port 2(ra0) entering forwarding state
<6>br0: port 2(ra0) entering forwarding state
<6>device vlan2 entered promiscuous mode
<6>device vlan2 left promiscuous mode
<6>br0: port 2(ra0) entering forwarding state
<6>etherip: Ethernet over IPv4 tunneling driver
Back to top
gnxredstar DD-WRT Novice Joined: 14 Oct 2012 Posts: 2
Back to top
_Cyber_ DD-WRT Novice Joined: 09 Jan 2012 Posts: 21
Posted: Mon Jan 07, 2013 20:14 Post subject:
Does wifi work on r20453 ?
Back to top
Some0neElse DD-WRT Novice Joined: 22 Mar 2011 Posts: 10
Posted: Sat Feb 02, 2013 18:18 Post subject:
On svn 20548 wi-fi still don't work.
Back to top
John877 DD-WRT Novice Joined: 22 Apr 2013 Posts: 21
Posted: Mon Apr 22, 2013 14:26 Post subject:
Have the problems been worked out of the new versions?
Currently at r21286.
Im waiting to try this but need WiFi and PPPoE to work.
Back to top
John877 DD-WRT Novice Joined: 22 Apr 2013 Posts: 21
Posted: Thu May 30, 2013 19:19 Post subject:
John877 wrote: Have the problems been worked out of the new versions?
Currently at r21286.
Im waiting to try this but need WiFi and PPPoE to work.
Anyone tried the new one on this router and does this stuff work ?
Back to top