lan ports can not be active after rebooting ,lan not working

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware
Author Message
ys11
DD-WRT Novice


Joined: 11 Sep 2014
Posts: 1

PostPosted: Sat Sep 13, 2014 2:57    Post subject: lan ports can not be active after rebooting ,lan not working Reply with quote
I installed DD-WRT v24-sp2 std rev.24461 on ESR-6650.
Once after flashing by u-boot TFTP on lan, lan-ports are active (lan LED flash). Then I change IP DHCP on client-pc,I can connect to 192.168.1.1 router-login.
But after rebooting, LED of lan are not flash and I can not connect ESR-6650 by wired lan.

After that I connect ESR-6650 by wireless.
Another functions are fine,especially I prefer the 3G function.
So,please help how to active the wired lan.

The difference between before and after reboot is times of hotplug-mesages.

Reference log-message

1)Once after flashing
start service
starting Architecture code for rt2880
starting hotplug
Jan 1 00:00:01 udevtrigger[47]: parse_config_file: can't open '/etc/udev/udev.conf' as config file: No such file or directory
function start_hotplug_block not found
function start_hotplug_block not found
function start_hotplug_block not found
function start_hotplug_block not found
function start_hotplug_block not found
done
switch reg write offset=14, value=405555
switch reg write offset=50, value=2001
switch reg write offset=90, value=7f7f
switch reg write offset=98, value=7f3f
switch reg write offset=e4, value=3f
switch reg write offset=40, value=1002
switch reg write offset=44, value=1001
switch reg write offset=48, value=1001
switch reg write offset=70, value=ffff417e
ra0: Network is down
[USB] checking...

2)After reboot
start service
starting Architecture code for rt2880
starting hotplug
Jan 1 00:00:01 udevtrigger[47]: parse_config_file: can't open '/etc/udev/udev.conf' as config file: No such file or directory
function start_hotplug_block not found
function start_hotplug_block not found
function start_hotplug_block not found
function start_hotplug_block not found
function start_hotplug_block not found
function start_hotplug_block not found
done
switch reg write offset=14, value=405555
switch reg write offset=50, value=2001
switch reg write offset=90, value=7f7f
switch reg write offset=98, value=7f3f
switch reg write offset=e4, value=3f
switch reg write offset=40, value=1002
switch reg write offset=44, value=1001
switch reg write offset=48, value=1001
switch reg write offset=70, value=ffff417e
ra0: Network is down
[USB] checking...

Another topics of same ploblems.

http://www.dd-wrt.com/phpBB2/viewtopic.php?p=782426
http://patchwork.openwrt.org/patch/2159/
Sponsor
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum