[mkk]

Does any one how to use the imgtool to set defalut nvram setting ? when i use it on vxkiller it said that the offset is not correct.


>imgtool_nvram.exe

imgtool_nvram 0.02 alpha - (c)2006 Jeremy Collake (jeremy@bitsum.com)
Free for all the world. GPL License.


Usage: imgtool_nvram cfeimage.bin [-offset x] [-size x] var1=xxx var2=yyy ...

cfeimage.bin is the input file (image of the CFE).
-offset supplies the nvram area offset (default is 4096)
-size supplies the nvram area maximum size (default is 4096)

Any number of variables can be specified. If an existing variable
already exists, it will be replaced.

Variables whose value includes spaces should be encapsulated in
quotation marks.

If no variables are specified, the current variables are shown.


>imgtool_nvram.exe CFE.bin

imgtool_nvram 0.02 alpha - (c)2006 Jeremy Collake (jeremy@bitsum.com)
Free for all the world. GPL License.

+ CFE image: CFE.bin
+ Reading nvram ...
boardtype=0x0467
boardnum=WAP54GV3_8M_0614
boardrev=0x13
boardflags=0x0758
sromrev=2
clkfreq=200
sdram_init=0x0002
sdram_config=0x0032
sdram_refresh=0
sdram_ncdl=0
et0macaddr=00:90:4c:91:00:01
et0phyaddr=30
et0mdcport=0
et1phyaddr=0x1f
wl0id=0x4318
il0macaddr=00:90:4c:91:00:02
aa0=3
ag0=2
pa0maxpwr=72
pa0itssit=62
pa0b0=0x176e
pa0b1=0xfa35
pa0b2=0xfe77
opo=12
wl0gpio0=0
wl0gpio1=255
wl0gpio2=255
wl0gpio3=255
wl0gpio5=2
cctl=0
ccode=0
vlan0hwname=et0
vlan0ports=1 2 3 4 5*
vlan1hwname=et0
vlan1ports=0 5u
landevs=vlan0 wl0
wandevs=et0
lan_ipaddr=192.168.1.245
lan_netmask=255.255.255.0
boot_wait=on
reset_gpio=7
watchdog=3000
gpio1=ses_led
gpio14=ses_button
Embedding nvram ...
+ Writing nvram ...
boardtype=0x0467
boardnum=WAP54GV3_8M_0614
boardrev=0x13
boardflags=0x0758
sromrev=2
clkfreq=200
sdram_init=0x0002
sdram_config=0x0032
sdram_refresh=0
sdram_ncdl=0
et0macaddr=00:90:4c:91:00:01
et0phyaddr=30
et0mdcport=0
et1phyaddr=0x1f
wl0id=0x4318
il0macaddr=00:90:4c:91:00:02
aa0=3
ag0=2
pa0maxpwr=72
pa0itssit=62
pa0b0=0x176e
pa0b1=0xfa35
pa0b2=0xfe77
opo=12
wl0gpio0=0
wl0gpio1=255
wl0gpio2=255
wl0gpio3=255
wl0gpio5=2
cctl=0
ccode=0
vlan0hwname=et0
vlan0ports=1 2 3 4 5*
vlan1hwname=et0
vlan1ports=0 5u
landevs=vlan0 wl0
wandevs=et0
lan_ipaddr=192.168.1.245
lan_netmask=255.255.255.0
boot_wait=on
reset_gpio=7
watchdog=3000
gpio1=ses_led
gpio14=ses_button

Completed successfully..

>imgtool_nvram.exe vxworks_killer_g_v06.bin

imgtool_nvram 0.02 alpha - (c)2006 Jeremy Collake (jeremy@bitsum.com)
Free for all the world. GPL License.

+ CFE image: vxworks_killer_g_v06.bin
+ Reading nvram ...
! ERROR: Read

! ERROR: NVRAM manipulation failed.

>

[Vaako]

Hi mkk,

I was wondering if you sitl got this file:

imgtool_nvram.exe ????????

If you do, can you please please send it to me as i cant find it nowhere on the net and not at: www.bitsum.com

Thanks in advance,
Vaako

[phuzi0n]

Every tutorial for neutered routers links to it...

http://www.bitsum.com/openwiking/owbase/ow.asp?WRT54G5_CFE

http://www.bitsum.com/files/imgtool_nvram.zip

[Vaako]

@phuzi0n

THANK YOU !