Author
Message
eloBROWN DD-WRT Novice Joined: 27 Feb 2022 Posts: 3
Posted: Sun Feb 27, 2022 19:24 Post subject: EA6500 v2 - Brick City Baby!
Hello Gentleman,
its been years since i had to get back into this, but from a long time ago i have these files:
Backup:
nvrambak_r38159_DD-WRT_EA6500v2_Linksys EA6700.bin
Initial_flash:
linksys-ea6500v2-webflash.bin
Linksys Orginal firmware:
FW_EA6500v2_1.1.42.203057_prod.img
linksys-ea6500v2:
command_NVRAM.txt
linksys-ea6500v2-webflash.bin
I had some concerns with how the wifi is setup on this router, so i did a hard reset (30/30/30)...
now i dont get any of my SSID's i just get dd-wrt...
the biggest problem is i cant get to the GUI, i can TFTP into it... and i have put the firmware several times back on.. but again no access to the GUI...
am i screwed?... tell it to me straight!... lol
is there any going back?...
is it possible to recover this?
any help would be greatly appreciated! truly!...
Description:
Filesize:
45.08 KB
Viewed:
1267 Time(s)
Back to top
Sponsor
blkt DD-WRT Guru Joined: 20 Jan 2019 Posts: 5700
Back to top
eloBROWN DD-WRT Novice Joined: 27 Feb 2022 Posts: 3
Posted: Sun Feb 27, 2022 20:24 Post subject:
well some good news is i do get ttl=64.. so the firmware is responding... but just not in the WEB GUI...
now i just gotta figure out where/what to look at now... ugh...
Looks like i am on build R38159 from 2019
Back to top
eloBROWN DD-WRT Novice Joined: 27 Feb 2022 Posts: 3
Posted: Sun Feb 27, 2022 21:09 Post subject:
I have tried the latest build as well.. R48425... same result (ttl=64, no web GUI)... either im stupid, or im missing what the problem is here....
im not bricked as im getting a response(64), i can load firmware over and over again with success(tftp).. but why cant i get access to the GUI ?....
i have tried from MAC and from PC... doesn't make a difference for me...
Back to top
kernel-panic69 DD-WRT Guru Joined: 08 May 2018 Posts: 14217 Location: Texas, USA
Back to top