DIR-300 + DD-WRT bricked after jffs was enabled

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Author Message
eduardoll
DD-WRT Novice


Joined: 02 Feb 2008
Posts: 8

PostPosted: Fri Mar 06, 2009 12:51    Post subject: DIR-300 + DD-WRT bricked after jffs was enabled Reply with quote
Hi All,

I've just bricked my D-Link DIR-300 router after trying to enable jffs to run some scripts.

Wired internet is working well but wireless (light is off) and web interface are not working. I was able to telnet the router (port 9000) and redo the procedure to load DD-WRT firmware on router but nothing changed. I cant telnet/ssh on the default ports.

Does anybody know if there is a solution for my router? RIP?

Tks!
Sponsor
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Fri Mar 06, 2009 13:04    Post subject: Reply with quote
u will have to delete the nvram in redboot
dir300 hasnt jffs support in newer releases

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
eduardoll
DD-WRT Novice


Joined: 02 Feb 2008
Posts: 8

PostPosted: Fri Mar 06, 2009 13:10    Post subject: Reply with quote
how can i do that?

I've tried
Code:
erase nvram
reboot

and
Code:
mtd -r erase nvram


after telnet 192.168.1.1 port 9000 but those commands are not recognized by the router.
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Fri Mar 06, 2009 18:30    Post subject: Reply with quote
fis delete linux
and reflash

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
eduardoll
DD-WRT Novice


Joined: 02 Feb 2008
Posts: 8

PostPosted: Fri Mar 06, 2009 21:33    Post subject: Reply with quote
tks! but it didn't work.. nothing is changed Sad
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Sat Mar 07, 2009 10:33    Post subject: Reply with quote
flash the latest pre sp2
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
eduardoll
DD-WRT Novice


Joined: 02 Feb 2008
Posts: 8

PostPosted: Thu Mar 12, 2009 2:35    Post subject: Reply with quote
just to give a feedback here.. i could solve my problem after restoring the original firmware and then reflashing dd-wrt. now it is working well..

thanks for the help
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Thu Mar 12, 2009 7:28    Post subject: Reply with quote
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=48607
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
mw1001
DD-WRT User


Joined: 12 Jul 2008
Posts: 54

PostPosted: Thu Jun 25, 2009 13:56    Post subject: Reply with quote
I've bricked 2 DIR-300, trying to enable jffs.
I simple click check "enable" at WEB interface, then click aply.
At this point, the web interface showed something like 2900kb of size. Since jffs wasn't mounted, I reboot the router. Then I discovered it was bricked.

The same happened with another dir-300.

I know how to un-brick. That isn't the problem.
But, my question is: can DIR-300 work with JFFS? If not, why is this option present in web interface?
Both router are (was) running the latest pre-SP2 release.

Regards.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum