Thank you very much for guiding me to the "RedBoot"
Not without (small) difficulty because I'm only 11 years old ( I have parental permission to post in the forum ).
But I managed to flash Avila GW2347 with RedBoot (very well).
My father worked in the radio-communications but it does not help me, he said: my son, you must make mistakes to learn ^ ^
So ...
I made a "how to", useful when you forgot or lost Login & Password DD-WRT
Sorry for my English because I'm French
*** How to Flash Avila GW2347 with DD-WRT for Novices like me ***
---Preparation for Work---
xxxxxxxxxxxxxxxxxxxxxxxxxx
- OS System computer : Windows 7 (yes i know ...)
- Freeware : Tftpd32 (Simple freeware that works very well)
- Download File : Linux.bin -> See Router Data Base DD-WRT for Avila GW2347
- IP computer : 192.168.3.1
- Netmask computer : 255.255.255.0
- IP ADRESS Avila GW2347 : 192.168.3.2
- MAC ADRESS Avila GW2347 : xx-xx-xx-xx-xx-xx ( Replacing xx by YOUR MAC ADRESS AVILA GW2347)
- PORT Avila GW2347: 9000
---WorK---
xxxxxxxxxx
* |-install Tftp32 on your computer and place the file: linux.bin (tftp serveur), (standby ...)
* |-Connect the power supply (12/18 Volts) at the P.O.E [ DC ]
* |-[P.O.E] to Avila GW2347 with cable rj45
* |-[LAN] to computer card ethernet with cable rj45
* |-Open terminal console (cmd WITH ADMINISTRATOR RIGHTS !): arp -s 192.168.3.2 xx-xx-xx-xx-xx-xx
(Replacing xx-xx... by your MAC adress Avila) and validate [enter]
* |-Open new terminal console (cmd) : ping -t 192.168.3.2
( ...ALWAYS let the ping run... )
* |Open new terminal console (cmd) : telnet 192.168.3.2 9000
(DON'T VALIDATE NOW !!! just standby)
* P.S : (Now) has the time, we have 3 terminal console open :
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- | Terminal console : "arp" , [ now, we NO longer need ]
- | Terminal console : "ping", Always, always, always the ping run ...
- | [NOW, WE NEED TO FOCUS ONLY ON TWO TERMINALE : " ping " and " telnet " ]
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
* |-Unplug the power supply (12/18 Volts) [ DC ]
|
* |-Look the terminal "ping" : an erreur message appears , etc ...[it is normal because we have disconnected the power supply]
* |- For the rest, we will have to be FASTER than a Cowboy !
|
* |- (Re) connect the power supply (12/18 Volts)
|
* |- Look the terminal "ping", when this message appears in terminal "ping" answering : ....etc..... 56(84) bytes of data.
|
* |- GO TO the terminal "telnet" that had been prepared and type CTRL + C + ENTER
(If you are NOT FAST, you have to try several times ...)
* |- if you succeed this manipulation, the [RedBoot] appears into terminal console "telnet"
* |- RedBoot> fis init -f
About to initialize .......continue (y/n) => YES
* |- RedBoot> load -r -v -b 0x00800000 linux.bin
(it will automatically download the file "linux.bin" by the server Tftpd32)
* |- RedBoot> fis create linux
* |- RedBoot> fis load linux
* |- RedBoot> exec
* |- Happy End !
|
* |- Reactivate your DHCP IP computer !
|
* |- Launch your web browser at this address: 192.168.1.1
|
* |- Enter Login : root and the password : admin
|
* |- REACTIVE YOUR KEY DD-WRT
I use Avila Gw2347 with mini pci Ubiquiti XR2, I get very good results (many options with dd-wrt).
(Next project: Ubiquiti Power APN with DD-wrt Software).
Last edited by KidFrench on Sat Nov 09, 2013 7:11; edited 1 time in total