[lgbjr]

Hi,

I've created a virtual wireless interface in an attempt to split and control traffic from guests and members.

I'm quite the novice, so I've been moving along quite slowly. After creating wl0.1, everything was ok, but just this was not enough to do what I want to do.

Next I added a bridge (br1) and assigned ip 192.168.2.1, and assigned wl0.1 to br1. I then added another DHCP server on br1.

Now, I can connect to wl0 and ip is assigned by DHCP (192.168.1.x), access the internet, etc. I can also connect to wl0.1 and ip is assigned by DHCP (192.168.2.x), but can't access the internet.

I know the next step is something with the port setup, but I don't know how to do it! Once I can access the internet using wl0.1, then I can use QoS and netmask priority to give priority to members.

Any help would be appreciated!

Thanks!

[James2k]

Take note of the firewall rules required:

http://www.dd-wrt.com/wiki/index.php/Multiple_WLANs#Restricting_Access

Usually not having an Internet connection on br1 is a sign of not having these firewall rules in place