Posted: Mon Mar 25, 2024 15:26 Post subject: New Build - 03/25/2024 - r55460
Welcome to Broadcom r55460 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Joined: 16 Nov 2015 Posts: 6437 Location: UK, London, just across the river..
Posted: Mon Mar 25, 2024 15:36 Post subject:
Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r55460 std (03/25/24)
Kernel Version Linux 4.4.302-st49 #11249 SMP Thu Mar 21 07:12:03 +06 2024 armv7l
update: CLI r55416 > r55460
reset: NO
mode: Gateway/DoH/DoT via SmartDNS, AD-Block(via script), IPset Firewall,Forced DNS,AP&Net Isolation,x3VLAN,VPN client(PBR),40 HT 2.4Ghz only
status: Operational 6h+
errors: I dont seem to find [b]/tmp/smartdns.log[/b]...checking smartdns.conf
shows that, i do have log-file /tmp/smartdns.log ..but i dont seem to have the log file created..at /tmp
log level is set to err..but even on default warn its still not created...is it disabled/stripped out by default?
Thanks BS and Team ! _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Router/Version: Asus RT-AC87U R
Update method: WebUpgrade
File/Kernel: asus_rt-ac87u-firmware.trx_r5560 std / Linux 4.4.302-st49 #11257 SMP Mon Mar 25 07:41:33 +06 2024 armv7l
Previous/Reset: r55416 / no
Mode/Status: Gateway / Up and running for 1:52 hours
CPU Temperature: CPU 63.6 °C / WL0 40.5 °C / WL1 0.0 °C (ambient temperature 17.0 °C)
Issues/Errors: yes
As always, the Quantenna chip has its own quirks. This is a closed source chipset
There is no way to install a channel.
But you can disable 5.0 GHz. @mpgalaxy hack "If you set the radio mode to station bridge and disable the network mode, the 5GHz device will turn off completely even after reboot."
The fact is that the router is connected to the Internet (to the Internet provider). And it reports an error, the red WAN indicator flashes (the icon in the form of a planet). The internet works, I just think it's a glitch.
But this does not affect the work.
Just relax
1. Failed to start OpenVPN Client via configuration file. OpenVPN Status is empty. I don’t see this problem on the second router ASUS RT-N66U.
2. CPU temperature is not displayed correctly.
CPU temperature readings started changing after one second from 63.6 - 64.1 °C
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 55779
Broadcom
Asus RT-AC87U R - DD-WRT 55819
Asus RT-N66U - DD-WRT 55779
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Works as well at r53562 did so far. _________________ Linksys EA8500 (Internet Gateway, AP/VAP) - DD-WRT r53562
Features in use: WDS-AP, Multiple VLANs, Samba, WireGuard, Entware: mqtt, mlocate
Wireless 5ghz only
Netgear R7800 (WDS-AP, WAP, VAP) - DD-WRT r55779
Features in use: multiple VLANs over single trunk port
Linksys EA8500 WDS Station x2 - DD-WRT r55799
Netgear R6400v2 WAP, VAP 2.4ghz only w/VLANs over single trunk port. DD-WRT r55779
OSes: Fedora 38, 9 RPis (2,3,4,5), 20 ESP8266s: Straight from Amiga to Linux in '94, never having owned a Windows PC.
Router/Version: Asus RT-N66U
Update method: WebUpgrade
File/Kernel: dd-wrt.v24-r55460_NEWD-2_K3.x-big-RT-N66U.trx / Linux 4.4.302-st49 #29409 Mon Mar 25 08:25:23 +06 2024 mips
Previous/Reset: r55416 / no
Mode/Status: Gateway / Up and running for 1 days, 1:01
CPU Temperature: WL0 48.5 °C (ambient temperature 20.3 °C)
Issues/Errors: Nothing significant
CPU temperature readings started changing after one second from 47.0 - 48.5 °C
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 55779
Broadcom
Asus RT-AC87U R - DD-WRT 55819
Asus RT-N66U - DD-WRT 55779
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Joined: 26 Mar 2013 Posts: 1857 Location: Hung Hom, Hong Kong
Posted: Wed Mar 27, 2024 3:02 Post subject: DD-WRT BS build 55460 and Asus RT-N18U
Router/Version:Asus RT-N18U (rev. A1)
Firmware: DD-WRT v3.0-r55460 std (03/25/24)
Kernel: Linux rt-n18u 4.4.302-st49 #11253 Mon Mar 25 07:19:27 +06 2024 armv7l DD-WRT
Previous: DD-WRT v3.0-r55350 std (03/12/24)
Mode: WAN @ DHCP, Wireless @ AP (N/G Mixed)
Status: Core functions Working {
Not 24/7; Not using CTF, FA, IPv6, VPN, VAP;
USB storage(/jffs, /opt); NAS (Lighttpd, ksmbd-Samba, MiniDLNA);
Cron enabled(default jobs deleted);
WAN DNS disabled; DDNS (no-ip.com) In-a-Dyn OK;
DNSmasq not serving DNS; Recursive DNS Unbound (/jffs/etc/unbound.conf);
Entware core (CPU: armv71) installed without problem;
Swap partition (USB) enabled for using GitHub
}
Reset: NO RESET (using command not WEBUI to flash; httpd disabled)
File:https://download1.dd-wrt.com//dd-wrtv2/downloads/betas/2024/03-25-2024-r55460/asus-rt-n18u/
Summary
NO strangeless after first firmware reboot, and after cold boot!!
All iptables trigger rules in stock firewall deleted to improve WiFi connections.
Speed Test
Wired LAN speed:
Code:
# sh stest.sh
Creating speedtest-cli.json from my.ookla.json
# speedtest --ca-certificate=/etc/ssl/ca-bundle.crt
Speedtest by Ookla
Server: Telstra International - Hong Kong (id: 44340)
ISP: Hong Kong Broadband Network
Idle Latency: 2.94 ms (jitter: 8.58ms, low: 1.87ms, high: 35.74ms)
Download: 93.08 Mbps (data used: 47.9 MB)
14.15 ms (jitter: 22.45ms, low: 6.03ms, high: 228.54ms)
Upload: 90.68 Mbps (data used: 46.6 MB)
14.50 ms (jitter: 6.39ms, low: 4.54ms, high: 43.66ms)
Packet Loss: 0.0%
Result URL: https://www.speedtest.net/result/c/a514c605-7b98-4f0e-9901-76ada2905a71
#
# speedtest_cli 1 1 1 1
speedtest_cli: Duration = 10.02 Download = 87.56 Mbit/s (11208.05 Kbyte/s)
speedtest_cli: Duration 10.12 Upload = 79.91 Mbit/s (10228.81 Kbyte/s)
Have this build working nicely on my R6250. Seeing up to 460Mbps on my laptop.
Older versions of DD-WRT enabled the CTF+FA option, however only CTF is available with this firmware. I know from searching the forum that others have had flow acceleration working on the R6250 and they reported significant improvements in throughput and CPU usage.
I tried to manually enable the feature with the DD-WRT command interface, and after a reboot the CTF+FA option showed up in DD-WRT; however, enabling CTF+FA ended up shutting off the router ports, requiring a factory reset. Is there a way to get this to work? I recently upgraded to symmetric gigabit, so would appreciate the performance gain.
Joined: 18 Mar 2014 Posts: 12884 Location: Netherlands
Posted: Wed Mar 27, 2024 12:47 Post subject:
LemmingFactory wrote:
Have this build working nicely on my R6250. Seeing up to 460Mbps on my laptop.
Older versions of DD-WRT enabled the CTF+FA option, however only CTF is available with this firmware. I know from searching the forum that others have had flow acceleration working on the R6250 and they reported significant improvements in throughput and CPU usage.
I tried to manually enable the feature with the DD-WRT command interface, and after a reboot the CTF+FA option showed up in DD-WRT; however, enabling CTF+FA ended up shutting off the router ports, requiring a factory reset. Is there a way to get this to work? I recently upgraded to symmetric gigabit, so would appreciate the performance gain.
Thanks!
Not sure if this applies to your situation, but from the Hardware wiki:
Note that for Flow Acceleration to be visible and selectable, the WAN interface of the router MUST be configured EITHER with DHCP or with a Static IP address, it must also have QoS disabled, and AFTER the configuration is saved and applied, the router MUST be rebooted for the option to appear. _________________ Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399 Install guide R7800/XR500:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614 Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Not sure if this applies to your situation, but from the Hardware wiki:
Note that for Flow Acceleration to be visible and selectable, the WAN interface of the router MUST be configured EITHER with DHCP or with a Static IP address, it must also have QoS disabled, and AFTER the configuration is saved and applied, the router MUST be rebooted for the option to appear.
Thanks... yes, I did get FA to appear after running the commands to enable it (plus setting a static WAN IP), but enabling FA locks up the ethernet ports once enabled, requiring a factory reset. I noticed Ticket #7444 seems to address this issue (on multiple routers). Guessing that's what's going on with the R6250 as well, suggesting the issue has yet to be fixed.
Joined: 08 May 2018 Posts: 14220 Location: Texas, USA
Posted: Fri Mar 29, 2024 16:20 Post subject:
Router: Linksys WRT160N v1.1
Version: reporting as 55209M std (02/27/24)
File: dd-wrt.v24_std_generic.bin
Kernel: Linux 2.4.37 #73992 Tue Feb 27 02:18:37 +06 2024 mips
Previous: DD-WRT v3.0-r54905M std (01/12/24)
Reset: No
Mode: Gateway, AP
Status: Ok
Uptime: ~25 minutes
Issues/Errors: K2.4 builds seem to be stuck at 55209 as previously noted by @lexridge:
I had opened a ticket regarding this if you want to add a comment about it:
https://svn.dd-wrt.com/ticket/7744 _________________ Linksys EA8500 (Internet Gateway, AP/VAP) - DD-WRT r53562
Features in use: WDS-AP, Multiple VLANs, Samba, WireGuard, Entware: mqtt, mlocate
Wireless 5ghz only
Netgear R7800 (WDS-AP, WAP, VAP) - DD-WRT r55779
Features in use: multiple VLANs over single trunk port
Linksys EA8500 WDS Station x2 - DD-WRT r55799
Netgear R6400v2 WAP, VAP 2.4ghz only w/VLANs over single trunk port. DD-WRT r55779
OSes: Fedora 38, 9 RPis (2,3,4,5), 20 ESP8266s: Straight from Amiga to Linux in '94, never having owned a Windows PC.
