network issue

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
View previous topic :: View next topic  
Author Message
fingerslip
DD-WRT Novice


Joined: 23 Feb 2012
Posts: 44
PostPosted: Sun Apr 14, 2013 19:30    Post subject: network issue Reply with quote
Hello,

I have a few issues with my new setup that I am testing

Modem - D-link DI-604 - Buffalo WZR-HP-AG300H

I am connecting a modem to DI-604 and a cable to Buffalo WZR-HP-AG300H so I can have wireless and get a better position for the wireless router 6-8 meters from modem and DI-604 and one pc that connects directly to the DI-604.


D-link DI-604 192.168.10.1

Buffalo WZR-HP-AG300H 192.168.1.1


My problem is that I am getting slow speed in bitorrents I have open the proper ports ins both routers but still is too slow 200kb/s

This most likely is some conflict and have most everything by default dhcp server and firewall active in both routers

any thoughts?
_________________
Router Model: Buffalo WZR-HP-AG300H
Back to top View user's profile Send private message Visit poster's website
Sponsor
buddee
DD-WRT Guru


Joined: 06 Feb 2010
Posts: 7020
Location: Little Rock
PostPosted: Sun Apr 14, 2013 19:34    Post subject: Reply with quote
Is the modem a 'modem/router combo' unit? If so, then yes, you are most likely double nat'n amongst other things. For this, Sounds like you need to set it up to be a WAP.

http://www.dd-wrt.com/wiki/index.php/Wireless_Access_Point
_________________
Wireless N Config | Linking Routers | DD-WRT Wiki | DD-WRT Builds | Peacock - Broadcom FAQ

Having problems with port forwarding? Check out Port Forward Troubleshooting for more info.
Back to top View user's profile Send private message Visit poster's website
fingerslip
DD-WRT Novice


Joined: 23 Feb 2012
Posts: 44
PostPosted: Sun Apr 14, 2013 20:41    Post subject: Reply with quote
buddee wrote:
Is the modem a 'modem/router combo' unit? If so, then yes, you are most likely double nat'n amongst other things. For this, Sounds like you need to set it up to be a WAP.

http://www.dd-wrt.com/wiki/index.php/Wireless_Access_Point


no, its a modem only connected to that old router D-Link Di-604 its only has 4 switch ports and 1 wan

edit: will check the Wireless access point
_________________
Router Model: Buffalo WZR-HP-AG300H
Back to top View user's profile Send private message Visit poster's website
fingerslip
DD-WRT Novice


Joined: 23 Feb 2012
Posts: 44
PostPosted: Tue Apr 16, 2013 23:15    Post subject: Reply with quote
is possible to use the WAN Traffic Counter with to count the traffic into another port?

My setup:

modem - D-link di-604(router) - Buffalo WZR-HP-AG300H (wireless access point)

the connection between routers is wired, the cable in ag300h is in wan port

i want to use the WAN Traffic Counter to count the traffic that enter the router
_________________
Router Model: Buffalo WZR-HP-AG300H
Back to top View user's profile Send private message Visit poster's website
B@R
DD-WRT User


Joined: 16 Apr 2011
Posts: 193
Location: Israel
PostPosted: Tue Apr 16, 2013 23:50    Post subject: Reply with quote
fingerslip wrote:
buddee wrote:
Is the modem a 'modem/router combo' unit? If so, then yes, you are most likely double nat'n amongst other things. For this, Sounds like you need to set it up to be a WAP.

http://www.dd-wrt.com/wiki/index.php/Wireless_Access_Point


no, its a modem only connected to that old router D-Link Di-604 its only has 4 switch ports and 1 wan

edit: will check the Wireless access point

DI-604 is not modem at all. It is very-very old and weak router with maximum of ... about 8 connections. It can not to work with P2P and normal speeds.
Back to top View user's profile Send private message
fingerslip
DD-WRT Novice


Joined: 23 Feb 2012
Posts: 44
PostPosted: Wed Apr 17, 2013 0:15    Post subject: Reply with quote
B@R wrote:
fingerslip wrote:
buddee wrote:
Is the modem a 'modem/router combo' unit? If so, then yes, you are most likely double nat'n amongst other things. For this, Sounds like you need to set it up to be a WAP.

http://www.dd-wrt.com/wiki/index.php/Wireless_Access_Point


no, its a modem only connected to that old router D-Link Di-604 its only has 4 switch ports and 1 wan

edit: will check the Wireless access point

DI-604 is not modem at all. It is very-very old and weak router with maximum of ... about 8 connections. It can not to work with P2P and normal speeds.


i didn't say that i was a modem...

modem (cisco) - D-link di-604(router) - Buffalo WZR-HP-AG300H (wireless access point)
_________________
Router Model: Buffalo WZR-HP-AG300H
Back to top View user's profile Send private message Visit poster's website
B@R
DD-WRT User


Joined: 16 Apr 2011
Posts: 193
Location: Israel
PostPosted: Wed Apr 17, 2013 1:24    Post subject: Reply with quote
OK, it's not important for your case. Your problem is DI-604. Simple throw it out. I know this box for ... about 8 years. It not suitable to work in present time. "Time to say goodbye" (c) Wink
Back to top View user's profile Send private message
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum