EKO 12476 NEWD-2 Only Thread

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3, 4, 5, 6, 7  Next
Author Message
latinpapie
DD-WRT User


Joined: 01 May 2009
Posts: 274
Location: San Jose, Ca

PostPosted: Sun Jul 12, 2009 4:03    Post subject: Reply with quote
nobody try to flash a WRT310N yet?
_________________
E3000 K2.6 Eko 16758 Mega
E3000 CB K2.6 EKO 16758 STD USB NAS
WRT610N V2 CB K2.6 Eko15337 STD Nokaid
WRT310N V2 CB K2.6 BS 15362 STD Nokaid
Sponsor
redhawk0
DD-WRT Guru


Joined: 04 Jan 2007
Posts: 11563
Location: Wherever the wind blows- North America

PostPosted: Sun Jul 12, 2009 11:54    Post subject: Reply with quote
PUNiZZLE wrote:
NEWD2 drivers are working perfectly fine with Asus WL-500W

Using the following processor: Broadcom BCM4704

rev. 9 if that's a factor. The new driver seems to work much better with the device.


Everyone...keep in mind that the processor type and corerev really don't make much difference. (within reason)

We have confirmation that it works on 5352 and newer models...but....some brick...some don't....we are still in that trial and error phase of figuring out which ones....(example....Works on a V5, bricks a GL. both have the same processor, corerev and radio chipset.)

so...don't go by the conventional wisdom of the past when trying NEWD2 builds...it doesn't apply.

redhawk

_________________
The only stupid question....is the unasked one.
freddie802
DD-WRT User


Joined: 18 Jan 2008
Posts: 269
Location: Devon, PA USA

PostPosted: Sun Jul 12, 2009 13:49    Post subject: Reply with quote
Flashed to my wrt600n v1.1 just fine running with AP on wl0 and repeater bridge on WL1. Seems snapier in the gui.
_________________
2 x wrt600n v1.1 AP WL0 Mixed Mode WPA2 Pers Aes, WL1 N Only Repeater Bridge WPA2 Pers AES V24 BS 15778 WT610N
wrt310n Wireless Bridge WPA2 Pers AES v24 BS 15506 Mini
wrt54g v7 G Only Repeater Bridge WPA2 Pers AES v24 BS 12523 Micro
imix7
DD-WRT Novice


Joined: 17 Apr 2007
Posts: 44

PostPosted: Sun Jul 12, 2009 20:11    Post subject: Reply with quote
i just upgraded my wrt300n 1.1 to newd2. working great for the last 30 min. i will post back with update..
barryware
DD-WRT Guru


Joined: 26 Jan 2008
Posts: 13049
Location: Behind The Reset Button

PostPosted: Sun Jul 12, 2009 20:16    Post subject: Reply with quote
latinpapie wrote:
nobody try to flash a WRT310N yet?


If I had one, I'd flash it..

Do you have jtag? If it bricks, all you need to do is erase nvram & kernel. You will not need to flash anything with jtag.

No jtag... wait for someone else to test..

Or.. Be a pioneer Razz

Don't be scared...

_________________
[Moderator Deleted] Shocked
latinpapie
DD-WRT User


Joined: 01 May 2009
Posts: 274
Location: San Jose, Ca

PostPosted: Sun Jul 12, 2009 20:57    Post subject: Reply with quote
LOL i would be a pioneer but no jtag and i dont think i would like to ruin my weekend by bricking my router and not having an escape route lol....on a percent scale what would be a percent success rate for a 310N not bricking? Question
_________________
E3000 K2.6 Eko 16758 Mega
E3000 CB K2.6 EKO 16758 STD USB NAS
WRT610N V2 CB K2.6 Eko15337 STD Nokaid
WRT310N V2 CB K2.6 BS 15362 STD Nokaid
kjbuente
DD-WRT User


Joined: 31 Mar 2007
Posts: 181
Location: /Earth/USA/OH/Zville

PostPosted: Sun Jul 12, 2009 21:03    Post subject: Reply with quote
Well it has been well over a day since I flashed NEWD2 on my WRT300n V1.1 and it is still running strong. My wife has noticed that she has been having less drop outs on her wireless, but that might not have anything to do with the new driver. (Down stairs neighbor moved out and might of lessend the 2.4Ghz congestion here). I have noticed better responce on the wireless, things are loading quicker. I also noticed that my 300N is using about 4MB less ram than my 350N(NEWD). Normally they stay the same. My 350N is actually just sitting there consuming power as nothing is connected to it exept the serial port.
_________________
WRT-350N v1.0; 128MB RAM, WPC600N, Dual USB, Mini+USB+FTP NEWD, CPU@330Mhz, Terk WF-R x3, Serial, external jtag, and working on SD Mod. Running Samba3, Lighttpd, and some Python apps.
WRT-300N v1.1; 128MB Ram, USB1.1, Bricked

ALL FOR SALE!
4512jth
DD-WRT User


Joined: 14 Mar 2009
Posts: 233

PostPosted: Sun Jul 12, 2009 21:14    Post subject: Reply with quote
latinpapie wrote:
LOL i would be a pioneer but no jtag and i dont think i would like to ruin my weekend by bricking my router and not having an escape route lol....on a percent scale what would be a percent success rate for a 310N not bricking? Question


Probably 50% it will work, 50% not. I would be a pioneer on my GSv6 but this is my dad's router and no JTAG so if I brick I'm screwed. He already doesn't like all the downtime I get when I'm screwing around with dd-wrt's settings Very Happy and im not suppose to touch it anymore lol :p
barryware
DD-WRT Guru


Joined: 26 Jan 2008
Posts: 13049
Location: Behind The Reset Button

PostPosted: Sun Jul 12, 2009 21:30    Post subject: Reply with quote
latinpapie wrote:
LOL i would be a pioneer but no jtag and i dont think i would like to ruin my weekend by bricking my router and not having an escape route lol....on a percent scale what would be a percent success rate for a 310N not bricking? Question


50/50... So far, nothing makes sense. Older routers run..V5 for instance. But the V8 bricks. TM runs, but the GL bricks.

So.. Don't spoil your evening.. Someone will test.

_________________
[Moderator Deleted] Shocked
latinpapie
DD-WRT User


Joined: 01 May 2009
Posts: 274
Location: San Jose, Ca

PostPosted: Sun Jul 12, 2009 21:34    Post subject: Reply with quote
yeah ill be patient for another few days if it doesnt work then ill give it a shot
_________________
E3000 K2.6 Eko 16758 Mega
E3000 CB K2.6 EKO 16758 STD USB NAS
WRT610N V2 CB K2.6 Eko15337 STD Nokaid
WRT310N V2 CB K2.6 BS 15362 STD Nokaid
sonarman
DD-WRT User


Joined: 13 Jun 2006
Posts: 89

PostPosted: Sun Jul 12, 2009 23:35    Post subject: Reply with quote
Well, I cant take it any more. Going to flash the 350N and see whats up with the ND2 Drivers. Shocked
_________________
WRT610N V2.0
Wrt54G V3.0
Wrt54G V7.0
Wrt54GS V7.0
Wrt350N V1.0
Wrt54gc
WNR834B V2
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1847
Location: Canada

PostPosted: Mon Jul 13, 2009 1:36    Post subject: Reply with quote
Has anyone noticed better performance with the NEWD2 with G-routers and having afterburner enabled?

I'm a bit disappointed the afterburner feature with my 2 Buffalo's, the AP & RB never show any improvement in speed. When they are the only 2 devices connecting to each other when using DD-WRT.

_________________
Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9

Off Site 1

R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4

Off Site 2

R7000 - Gateway & WiFi - DDWRT r52330 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531


YAMon 3.4.6 | DNSCrypt-Proxy V2
Hexedit
DD-WRT Novice


Joined: 13 Jul 2009
Posts: 2
Location: Woodbridge, CT

PostPosted: Mon Jul 13, 2009 1:38    Post subject: Reply with quote
I flash my 600N v 1.1 to Eko's 12461M build the other day using the 610N firmware and it caused my 5.8 wireless to completely crap out. I can detect it but my computer will not connect to it. I did do a 30/30/30 reset when I flashed the firmware. Is the newer firmware more stable and if I flash should I use the 610N build again or use the NEWD2 Mega build?
freddie802
DD-WRT User


Joined: 18 Jan 2008
Posts: 269
Location: Devon, PA USA

PostPosted: Mon Jul 13, 2009 2:10    Post subject: Reply with quote
Hexedit wrote:
I flash my 600N v 1.1 to Eko's 12461M build the other day using the 610N firmware and it caused my 5.8 wireless to completely crap out. I can detect it but my computer will not connect to it. I did do a 30/30/30 reset when I flashed the firmware. Is the newer firmware more stable and if I flash should I use the 610N build again or use the NEWD2 Mega build?

This was already discussed in this thread. It doesn't make any difference between the two builds. I flashed mega on my wrt600n v1.1 just fine and I have both 2.4 & 5.8 Ghz working just fine.

_________________
2 x wrt600n v1.1 AP WL0 Mixed Mode WPA2 Pers Aes, WL1 N Only Repeater Bridge WPA2 Pers AES V24 BS 15778 WT610N
wrt310n Wireless Bridge WPA2 Pers AES v24 BS 15506 Mini
wrt54g v7 G Only Repeater Bridge WPA2 Pers AES v24 BS 12523 Micro
kjbuente
DD-WRT User


Joined: 31 Mar 2007
Posts: 181
Location: /Earth/USA/OH/Zville

PostPosted: Mon Jul 13, 2009 2:16    Post subject: Reply with quote
I hope that you have better luck than I. The NEWD2 bricked my WRT350N.

Quote:
Well, I cant take it any more. Going to flash the 350N and see whats up with the ND2 Drivers. Shocked

_________________
WRT-350N v1.0; 128MB RAM, WPC600N, Dual USB, Mini+USB+FTP NEWD, CPU@330Mhz, Terk WF-R x3, Serial, external jtag, and working on SD Mod. Running Samba3, Lighttpd, and some Python apps.
WRT-300N v1.1; 128MB Ram, USB1.1, Bricked

ALL FOR SALE!
Goto page Previous  1, 2, 3, 4, 5, 6, 7  Next Display posts from previous:    Page 3 of 7
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum