Posted: Fri Aug 07, 2009 0:01 Post subject: WRT54G v5 TFTP after JTAG?
I have a bricked WRT54G v5 router that I just did a CFE flash on and now the LAN port light is correctly lit, but the power light blinks on and I cannot ping the router but I am getting some signal (limited to no connectivity).
Is this when I can do TFTP? I read the wikis and they all said I should be able to ping the router... right? _________________ Case: Antec Twelve Hundred ATX
CPU: Intel 2 Quad Q6600
Motherboard: ASUS P5k Deluxe
GPU: Gefore 9800 GTX
PSU: Corsair 750W
RAM: 4gb Corsair Dominator
HD: 500gb Seagate Barracuda
Joined: 26 Jan 2008 Posts: 13049 Location: Behind The Reset Button
Posted: Fri Aug 07, 2009 0:07 Post subject:
yessum... sounds like you are good to go but I bet you did not set a static IP on your rig. Without running firmware, there is no dhcp server running on the router.
static ip on your rig: 192.168.1.10, mask 255.255.255.0, gateway 192.168.1.1. AV & firewall software disabled.. Now ping that bitch. you will get ttl=100. now tftp the firmware image. _________________ [Moderator Deleted]
do i need to tftp anything tyo do with the vxkiller or whatever that is? or can I directly uplaod the dd0wrt micro fw? _________________ Case: Antec Twelve Hundred ATX
CPU: Intel 2 Quad Q6600
Motherboard: ASUS P5k Deluxe
GPU: Gefore 9800 GTX
PSU: Corsair 750W
RAM: 4gb Corsair Dominator
HD: 500gb Seagate Barracuda