WRT54G v5 TFTP after JTAG?

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
View previous topic :: View next topic  
Author Message
Arrolus
DD-WRT User


Joined: 29 Jan 2009
Posts: 136
PostPosted: Fri Aug 07, 2009 0:01    Post subject: WRT54G v5 TFTP after JTAG? Reply with quote
I have a bricked WRT54G v5 router that I just did a CFE flash on and now the LAN port light is correctly lit, but the power light blinks on and I cannot ping the router but I am getting some signal (limited to no connectivity).

Is this when I can do TFTP? I read the wikis and they all said I should be able to ping the router... right?
_________________
Case: Antec Twelve Hundred ATX
CPU: Intel 2 Quad Q6600
Motherboard: ASUS P5k Deluxe
GPU: Gefore 9800 GTX
PSU: Corsair 750W
RAM: 4gb Corsair Dominator
HD: 500gb Seagate Barracuda
Back to top View user's profile Send private message AIM Address Yahoo Messenger MSN Messenger
Sponsor
barryware
DD-WRT Guru


Joined: 26 Jan 2008
Posts: 13049
Location: Behind The Reset Button
PostPosted: Fri Aug 07, 2009 0:07    Post subject: Reply with quote
yessum... sounds like you are good to go but I bet you did not set a static IP on your rig. Without running firmware, there is no dhcp server running on the router.

static ip on your rig: 192.168.1.10, mask 255.255.255.0, gateway 192.168.1.1. AV & firewall software disabled.. Now ping that bitch. you will get ttl=100. now tftp the firmware image.
_________________
[Moderator Deleted] Shocked
Back to top View user's profile Send private message
Arrolus
DD-WRT User


Joined: 29 Jan 2009
Posts: 136
PostPosted: Fri Aug 07, 2009 0:25    Post subject: Reply with quote
do i need to tftp anything tyo do with the vxkiller or whatever that is? or can I directly uplaod the dd0wrt micro fw?
_________________
Case: Antec Twelve Hundred ATX
CPU: Intel 2 Quad Q6600
Motherboard: ASUS P5k Deluxe
GPU: Gefore 9800 GTX
PSU: Corsair 750W
RAM: 4gb Corsair Dominator
HD: 500gb Seagate Barracuda
Back to top View user's profile Send private message AIM Address Yahoo Messenger MSN Messenger
barryware
DD-WRT Guru


Joined: 26 Jan 2008
Posts: 13049
Location: Behind The Reset Button
PostPosted: Fri Aug 07, 2009 0:27    Post subject: Reply with quote
if you jtag'd a dd-wrt cfe, no.. you just need to tftp the dd-wrt MICRO firmware image.
_________________
[Moderator Deleted] Shocked
Back to top View user's profile Send private message
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum