Joined: 18 Jan 2008 Posts: 269 Location: Devon, PA USA
Posted: Wed Aug 06, 2008 2:10 Post subject:
According to the status my two wrt600n's are connecting at 270Mbps, has the wireless driver been fixed to support higher speeds? Still have same issue with status screens showing blanks for a lot of the fields. Other than that seems to be working just fine with wds and wep encryption.
According to the status my two wrt600n's are connecting at 270Mbps, has the wireless driver been fixed to support higher speeds? Still have same issue with status screens showing blanks for a lot of the fields. Other than that seems to be working just fine with wds and wep encryption.
I noticed that as well but it went away after I configured everything.
By the way, your CFE looks fine. Are you still having problems? _________________ WRT54G v3 - v24 r14471M NEWD Eko - AP
WRT350N v1.0
WRT600N v1.1 - halfway there!
Se7en is Darker...
Posted: Wed Aug 06, 2008 5:15 Post subject: Thanks
Thanks for the heads up!
Any word on whether or not this fixes the issue with incorrect default parameters for 'nas' that caused the wifiplanet.com tutorial for isolated vssids to fail?
I have two of these and v24 SP1 completely ate itself on both the ap router and the repeater bridge (to the point of half-bricked on bridge), I hunted high and lo for a better build and found this one. Superior work! Speeds are back to v23 speeds and everything seems more stable in this build than some previous ones.
Joined: 07 Jun 2006 Posts: 1476 Location: New York, USA
Posted: Wed Aug 06, 2008 23:52 Post subject: VPN STD non-jffs version reboots under load
I have a WRT54GL V1.1
Have been running V24 stable VPN 5/16/08 build with no issues at all.
Loaded the SP1 (second build) and as soon as any load on the router DSL report speed test) router would reboot. (bugtrak 3234)
Loaded 10108 NEWD VPN no Jffs version today. Router behaves a little better - stays up longer but still reboots under youtube load or DSLreports speed test. Will not finish a speed test under this version so I cant give overall speed.
Noticed I have only 300K free memory under this version where under V24 STD VPN I have 1.2M free memory
Wondering if the reboot issues are memory related.
Did full reset and manual config load after flash just to be sure.
Fell Back to the V24 5/16/08 build and all is good - speed tests showing the normal 8600/396
Joined: 30 Jun 2008 Posts: 825 Location: near Toronto, Canada
Posted: Thu Aug 07, 2008 0:05 Post subject:
dellsweig
I have a WRT54GL also, and I have tried every build ofdd-wrt v24 since SP1, and have not encountered the problem you are having.
FWIW, my speedtest results approach 9999 down/ 625 up, but I do not use QoS. At the moment, I am filtering clients by MAC address, and am not using WEP or WPA.
Joined: 07 Jun 2006 Posts: 1476 Location: New York, USA
Posted: Thu Aug 07, 2008 0:12 Post subject:
hpsenicka wrote:
dellsweig
I have a WRT54GL also, and I have tried every build ofdd-wrt v24 since SP1, and have not encountered the problem you are having.
FWIW, my speedtest results approach 9999 down/ 625 up, but I do not use QoS. At the moment, I am filtering clients by MAC address, and am not using WEP or WPA.
That is a difference - have WPA on the wireless and QoS for my 2 VoiP lines as well as my Roku bridge.
In addition, I have bandwidth limits set on various IP's in the network using iptables scripting.
It is interesting that I do not have the issue with the V24 stable build - I first noticed this with SP1
Posted: Thu Aug 07, 2008 1:50 Post subject: Re: Thanks
wall_e wrote:
Any word on whether or not this fixes the issue with incorrect default parameters for 'nas' that caused the wifiplanet.com tutorial for isolated vssids to fail?
I am wondering the same thing. Can anyone advise on this?