D-Link DIR-825 Rev. B - Porting DD-WRT

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page Previous  1, 2, 3 ... 137, 138, 139 ... 147, 148, 149  Next
Author Message
rila
DD-WRT Novice


Joined: 09 Apr 2014
Posts: 3

PostPosted: Sat Apr 19, 2014 16:38    Post subject: Reply with quote
tatsuya46 wrote:
rila wrote:
Hi!

Anyone knows why the web gui is very very slow?
Sometimes pages won't open.
Problem came randomly, on all last 3 builds.

Also tried resetting nvram and 30/30/30

Last build: DD-WRT v24-sp2 (03/29/14) std
Model: Atheros AR7161 rev 2 (0xaa) DIR825-B


make sure you are not using hybla for tcp congestion control


Thanks for suggestion. But not working.

IP Filter Maxiumum Ports 4096
Active connections: 40
Westwood
TCP timeout 600
UDP timeout 120

Have WAN Traffic Controller disabled. Also my wifi speed went down from 100mbps to 60mbps.

Load avarage: 0.04, 0.11, 0.10
Memory Available 94%

Upgraded to DD-WRT v24-sp2 (04/18/14) std too. Didn't fix.
Sponsor
Drek
DD-WRT User


Joined: 28 Sep 2008
Posts: 218

PostPosted: Wed Apr 23, 2014 16:54    Post subject: Reply with quote
23919 did not brick my router. Also recommended to use the latest stable, or this version due to updates to Open SSL, and update your router password.
_________________
Netgear XR500
Rogers Ignite Cable
150mbps down/15mbps up
LightMoon
DD-WRT User


Joined: 09 Sep 2012
Posts: 64

PostPosted: Wed Apr 23, 2014 19:00    Post subject: Reply with quote
rila wrote:
tatsuya46 wrote:
rila wrote:
Hi!

Anyone knows why the web gui is very very slow?
Sometimes pages won't open.
Problem came randomly, on all last 3 builds.

Also tried resetting nvram and 30/30/30

Last build: DD-WRT v24-sp2 (03/29/14) std
Model: Atheros AR7161 rev 2 (0xaa) DIR825-B


make sure you are not using hybla for tcp congestion control


Thanks for suggestion. But not working.

IP Filter Maxiumum Ports 4096
Active connections: 40
Westwood
TCP timeout 600
UDP timeout 120

Have WAN Traffic Controller disabled. Also my wifi speed went down from 100mbps to 60mbps.

Load avarage: 0.04, 0.11, 0.10
Memory Available 94%

Upgraded to DD-WRT v24-sp2 (04/18/14) std too. Didn't fix.


I have the same problem as you mentioned. Sad

_________________
Netgear R7000
(Latest SVN revision)
shaark
DD-WRT Novice


Joined: 30 Apr 2014
Posts: 2

PostPosted: Wed Apr 30, 2014 3:21    Post subject: DIR-825 NTFS support Reply with quote
I am using the latest DD-WRT (23919) for my DIR-825 and I am unable for the router to mount an USB NTFS formatted drive. Is this supported? If not, is there a way to enable this?
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Wed Apr 30, 2014 7:03    Post subject: Reply with quote
LightMoon wrote:
rila wrote:
tatsuya46 wrote:
rila wrote:
Hi!

Anyone knows why the web gui is very very slow?
Sometimes pages won't open.
Problem came randomly, on all last 3 builds.

Also tried resetting nvram and 30/30/30

Last build: DD-WRT v24-sp2 (03/29/14) std
Model: Atheros AR7161 rev 2 (0xaa) DIR825-B


make sure you are not using hybla for tcp congestion control


Thanks for suggestion. But not working.

IP Filter Maxiumum Ports 4096
Active connections: 40
Westwood
TCP timeout 600
UDP timeout 120

Have WAN Traffic Controller disabled. Also my wifi speed went down from 100mbps to 60mbps.

Load avarage: 0.04, 0.11, 0.10
Memory Available 94%

Upgraded to DD-WRT v24-sp2 (04/18/14) std too. Didn't fix.


I have the same problem as you mentioned. Sad


over ethernet or wifi if over wifi which freq band? b1 or b2 units? b2 seems to get some random unknown issues that b1 dont get.

_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55797 std
[QUALCOMM] DIR-862L --------------------------------> r55797 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

rila
DD-WRT Novice


Joined: 09 Apr 2014
Posts: 3

PostPosted: Sat May 10, 2014 10:39    Post subject: Reply with quote
tatsuya46 wrote:
LightMoon wrote:
rila wrote:
tatsuya46 wrote:
rila wrote:
Hi!

Anyone knows why the web gui is very very slow?
Sometimes pages won't open.
Problem came randomly, on all last 3 builds.

Also tried resetting nvram and 30/30/30

Last build: DD-WRT v24-sp2 (03/29/14) std
Model: Atheros AR7161 rev 2 (0xaa) DIR825-B


make sure you are not using hybla for tcp congestion control


Thanks for suggestion. But not working.

IP Filter Maxiumum Ports 4096
Active connections: 40
Westwood
TCP timeout 600
UDP timeout 120

Have WAN Traffic Controller disabled. Also my wifi speed went down from 100mbps to 60mbps.

Load avarage: 0.04, 0.11, 0.10
Memory Available 94%

Upgraded to DD-WRT v24-sp2 (04/18/14) std too. Didn't fix.


I have the same problem as you mentioned. Sad


over ethernet or wifi if over wifi which freq band? b1 or b2 units? b2 seems to get some random unknown issues that b1 dont get.


Dir825-b2 indeed.
Wireless 2.4Ghz and 5Ghz.
Also via LAN
Romberry
DD-WRT Novice


Joined: 12 May 2012
Posts: 4

PostPosted: Sat May 24, 2014 22:52    Post subject: 5GHz N-only wide channel 300mps support? Reply with quote
Just flashed my D-Link DIR-825 rev B1 with DD-WRT v24-sp2 (04/18/14) std 23919. 2.4GHz and 5GHz radios come up and I can connect. However, on the 5GHz channel, I have some issues.

If I set the channel to N-only, I can't connect no matter what. If I set it mixed mode, I can connect, but even with Channel Width set to "Turbo, 40 MHz", I am limited to the same 54mbps as standard wireless G on 2.4GHz. (I assume this is the result of mixed mode, same as older wireless B/G where if you set mixed mode, the max data rate was limited to the lower of the two.)

Is there anyone who is actually getting 300mbps (wide channel) N speeds with DD-WRT on the DIR-825 rev B1 with any build of DD-WRT? Pointers, advice, workarounds...appreciate anything anyone can offer here.

I had tried DD-WRT on this device back in 2012 but there were issues getting the 5GHz channel to come up at all back then, so I went back to the stock firmware. Now the 5Ghz channel comes up...but I really need the higher transfer rate of N-only 300 mbps.

On edit...

Followed another poster's link to the Atheros wireless settings page at http://www.dd-wrt.com/wiki/index.php/Atheros/ath_wireless_settings and see that N-only is broken. Does that mean 54mbps is all there is?
Drek
DD-WRT User


Joined: 28 Sep 2008
Posts: 218

PostPosted: Mon May 26, 2014 13:34    Post subject: Reply with quote
Beta Version: r24118
Status: FAIL
Reset: Yes
Errors: WAN did not work, wired LAN did not work; reverted to last good version

Do NOT upgrade to this beta.

_________________
Netgear XR500
Rogers Ignite Cable
150mbps down/15mbps up
blade86sam
DD-WRT Novice


Joined: 26 May 2014
Posts: 19
Location: Montreal, Quebec

PostPosted: Mon May 26, 2014 18:16    Post subject: Reply with quote
Drek wrote:
Beta Version: r24118
Status: FAIL
Reset: Yes
Errors: WAN did not work, wired LAN did not work; reverted to last good version

Do NOT upgrade to this beta.


CONFIRMED! DO NOT upgrade to this version (r24118).

Please note: WLAN does in fact work on r24118, and is the only way to revert back to r23919. (well, that's how i did it)

---------------------------------------------------
latest working/stable version: r23919


edit: n.b. i am using my router as an AP/Switch only, so most services are disabled, except for essential ones


Last edited by blade86sam on Mon May 26, 2014 18:29; edited 2 times in total
Drek
DD-WRT User


Joined: 28 Sep 2008
Posts: 218

PostPosted: Mon May 26, 2014 18:27    Post subject: Reply with quote
Yes, wireless lan is the only thing that seems to work at all with this version, that and the web gui. And the only way to revert to a previous version is using the wlan.
_________________
Netgear XR500
Rogers Ignite Cable
150mbps down/15mbps up
Drek
DD-WRT User


Joined: 28 Sep 2008
Posts: 218

PostPosted: Tue May 27, 2014 18:48    Post subject: Reply with quote
Beta Version: r24160
Status: OK
Reset: NO
Errors: NONE

Good version fellow geekazoids! Go get 'er!

_________________
Netgear XR500
Rogers Ignite Cable
150mbps down/15mbps up
Drek
DD-WRT User


Joined: 28 Sep 2008
Posts: 218

PostPosted: Sun Jun 08, 2014 19:35    Post subject: Reply with quote
Beta Version: r24160
Reset: 30/30/30
Status: OK
Errors: Unable to access by wifi with an Android device (Nexus 7 - fully updated). Both bands showed as inaccessible. However my wireless printer on the 2.4ghz band was functioning without issues. Rebooting the router fixed the problem.

_________________
Netgear XR500
Rogers Ignite Cable
150mbps down/15mbps up
boostfrenzy
DD-WRT User


Joined: 03 Feb 2007
Posts: 77

PostPosted: Fri Jun 20, 2014 1:51    Post subject: Reply with quote
Just installed this, 24160, works fine speeds are great when nearby but I'm using the supplied 2dbi antennas and the range is AWWWWWFUL compared to anything I've ever used/installed. Do 7/9dbi gain antennas resolve the issue or need higher power wndr3700 unit? 5ghz is basically useless outside of the room I have the AP mounted in
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Fri Jun 20, 2014 5:22    Post subject: Reply with quote
boostfrenzy wrote:
Just installed this, 24160, works fine speeds are great when nearby but I'm using the supplied 2dbi antennas and the range is AWWWWWFUL compared to anything I've ever used/installed. Do 7/9dbi gain antennas resolve the issue or need higher power wndr3700 unit? 5ghz is basically useless outside of the room I have the AP mounted in


dir-825 b1 is the host router of the house & i have my wdr4900 connected to it via 5ghz going through 2 walls & a floor with an snr of 28..

_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55797 std
[QUALCOMM] DIR-862L --------------------------------> r55797 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

Drek
DD-WRT User


Joined: 28 Sep 2008
Posts: 218

PostPosted: Fri Jun 20, 2014 9:15    Post subject: Reply with quote
Ya, I have a DIR-825 rev. b1 as well, and it works beautifully throughout the house. It is mounted on my desk in a back corner of the house. I have it set up so my neighbour across the street can access it in an emergency, and while the signal isn't great across the street, it works for her if she moves her laptop to the front of the house. And this is with the stock, crap antennae.
_________________
Netgear XR500
Rogers Ignite Cable
150mbps down/15mbps up
Goto page Previous  1, 2, 3 ... 137, 138, 139 ... 147, 148, 149  Next Display posts from previous:    Page 138 of 149
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum