Im back at 18007 and my lan ports are working then.. Is there a config tweak i have missed after upgrading?
Anyone else share any experiences with the 18024 firmware and this issue? If it works fine for "everyone else", im willing to give it another whirl making sure to do a 30-30-30 reset and whatnot.. Just not sure why this problem arises now, when the 2-3 previous builds have not had any problems.
Well I can flash over WiFi, and have tried builds from 16215, to 18007 18767 and 18777, but still I can't get the LAN's to re appear.
They were working, I had just set up a bridge with the DIR-300b and a WRT54GL and it worked fine for a few hours.
I changed SSID broadcast to off and this broke the bridge, so i had to go back to LAN to re enable SSID broadcast.
After that , the wireless bridge cam back but LAN had died.
Other suggestions for getting the LAN back appreciated.
I seem to remember reading that the unit contains a ROM , that allow total 'to factory' return of all firmware..how is that accessed? I guess via LAN