Support for Tjtag and Tornado

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
barryware
DD-WRT Guru


Joined: 26 Jan 2008
Posts: 12857
Location: Behind The Reset Button

PostPosted: Sat Nov 14, 2009 16:50    Post subject: Support for Tjtag and Tornado Reply with quote
With the newer routers and protection schemes that are beginning to surface, We need to consider donating a brick or two to Tornado.

For instance, the wrt160n uses an 8 bit data buss as opposed to the typical 16 bit buss. The jtag utility does not work with this device. Trying to provide information with a device in hand to T~ so he can add support to the jtag utility just doesn't work. He needs the device in hand.

The newer routers are now coming with a serial flash instead of a parallel flash, support needs to be added to these also.

Depending on the location of the bricked device, we can possibly ask for cash donations to cover the shipping directly to the donor.

I'm not suggestion that perfectly good working devices be sent to T~ although that would be nice. However if there is a "brick" about and all attempts at recovery have failed and there is no jtag support for that device, that should be donated so support can be added.

We would exclude devices that are already supported..

Maybe T~ will see this thread and chime in with a list of devices.

1st on the list, would be a wrt160n

_________________
[Moderator Deleted] Shocked


Last edited by barryware on Tue Jun 22, 2010 18:24; edited 1 time in total
Sponsor
Eko
DD-WRT Developer/Maintainer


Joined: 07 Jun 2006
Posts: 5772

PostPosted: Sun Nov 15, 2009 9:02    Post subject: Reply with quote
I can only second that request. Please do contact Tornado if you have a router or a brick to donate that he can use for developing/testing/...

I'm sure he will make good use of any paypal donations too.

Eko

_________________
Professional debrick service for EU countries for small fee.
Send inquiries to: debrick at dd-wrt dot si

Have a brick you don't need?

Paypal & Amazon.com gift cards are welcome. Every $ or € counts. Email: donate at dd-wrt dot si
Masterman
DD-WRT Guru


Joined: 24 Aug 2009
Posts: 2061
Location: South Florida

PostPosted: Sun Nov 15, 2009 10:02    Post subject: Reply with quote
Where is he located? I have another RT-N16 on the way (since they were $35)...
_________________
Optware, the Right Way
Asus RT-N66U
Asus RT-N10
Asus RT-N12
Asus RT-N16 x5
Asus WL520gU
Asus WL500gPv2 x2
Asus WL500W
D-Link DIR-825B
Engenious ECB3500
Linksys WRT320Nv1
Linksys WRT600Nv1.1
Linksys WRT610Nv1
Linksys E2000
Netgear WNDR3300
SonicWall NSA220W
SonicWall TZ215W
SonicWall TZ210W
SonicWall TZ205W
SonicWall TZ200W
SonicWall TZ190W
SonicWall TZ180W
SonicWall TZ170W
SonicWall TZ105W
LOM
DD-WRT Guru


Joined: 28 Dec 2008
Posts: 7219

PostPosted: Sun Nov 15, 2009 10:26    Post subject: Reply with quote
Masterman wrote:
Where is he located? I have another RT-N16 on the way (since they were $35)...


In the historical old town Odessa, Ukraine

_________________
I'm on a whiskey diet, lost 3 days already
Tornado
DD-WRT Developer/Maintainer


Joined: 07 Jun 2006
Posts: 2087
Location: Odessa, Ukraine

PostPosted: Sun Nov 15, 2009 11:41    Post subject: Reply with quote
@Masterman,

Thanks for the offer, but I have a 320n that has a 4716 processor in it, right now, what I need is a router that has an 8 bit bus, like the wrt160n, or something similiar.

It can be broadcom or Atheros based...

additional units with 8 bit bus

FON 2100
Dlink DWL-2100AP - Atheros 2313A

_________________
Want JTAG support - Donate a router
or Donate with PayPal !

My preferred parallel jtag adapter:
TIAO Parallel adapter

Tjtag website - http://tjtag.com

Compiling DD-WRT on:
AMD Phenom II X6 1090T @ 3926.667 Mhz

Aptosid X64 - Debian SID X64
Ubuntu 10.10 X64 - Arch X64


Last edited by Tornado on Tue Nov 17, 2009 6:24; edited 1 time in total
Murrkf
DD-WRT Guru


Joined: 22 Sep 2008
Posts: 11475

PostPosted: Sun Nov 15, 2009 23:58    Post subject: Reply with quote
Could you specify which routers would work, that you are aware of. Can you use a 160n v.2 or does it have to be a v.1? (Or does it have to be a v.2?)
_________________
SIG:
I'm trying to teach you to fish, not give you a fish. If you just want a fish, wait for a fisherman who hands them out. I'm more of a fishing instructor. So See this:
http://i31.tinypic.com/24mz3ms.png

LOM: "If you show that you have not bothered to read the forum announcements or to follow the advices in them then the level of help available for you will drop substantially, also known as Murrkf's law.."
Tornado
DD-WRT Developer/Maintainer


Joined: 07 Jun 2006
Posts: 2087
Location: Odessa, Ukraine

PostPosted: Tue Nov 17, 2009 6:26    Post subject: Reply with quote
@Murrkf

Im not sure on the version, I think Barryware has one, but maybe not..look at my post above for units I have added with 8 bit bus

_________________
Want JTAG support - Donate a router
or Donate with PayPal !

My preferred parallel jtag adapter:
TIAO Parallel adapter

Tjtag website - http://tjtag.com

Compiling DD-WRT on:
AMD Phenom II X6 1090T @ 3926.667 Mhz

Aptosid X64 - Debian SID X64
Ubuntu 10.10 X64 - Arch X64
barryware
DD-WRT Guru


Joined: 26 Jan 2008
Posts: 12857
Location: Behind The Reset Button

PostPosted: Tue Nov 17, 2009 14:06    Post subject: Reply with quote
The V1's are the ones with the 8 bit buss. Not sure about the V2's. I don't have one of either as yet.
_________________
[Moderator Deleted] Shocked
barryware
DD-WRT Guru


Joined: 26 Jan 2008
Posts: 12857
Location: Behind The Reset Button

PostPosted: Sun Dec 06, 2009 23:13    Post subject: Reply with quote
bump....

no jtag support for new devices unless we get some serial routers to T~ (8 bit buss (160), serial flash devices (610 V2))

I have nothing to send..
pgfox46
DD-WRT User


Joined: 18 Apr 2007
Posts: 70

PostPosted: Mon Dec 07, 2009 1:25    Post subject: Reply with quote
ill send one or donate 100 dollars Canadian for development of proper mlppp support.
Donny
DD-WRT Guru


Joined: 13 Nov 2008
Posts: 5266
Location: CENTRAL Midnowhere

PostPosted: Sun Feb 07, 2010 15:25    Post subject: Reply with quote
Tornado does a TON of work and this project would be nothing without the work he has done to develop jtag support so that we have a means of surviving bricks. He gets NOTHING for doing this, except what people choose to donate, which has been very, very little.

If tjtag has been useful to you, you should send a few dollars to tornado, if only to show you appreciate what he has done. There is a donate link in his signature, in his post above. Use it!

_________________
Warning: I'm "out of my element!"
http://www.youtube.com/watch?v=MjYJ7zZ9BRw&NR=1

Peacock Thread Sticky- Just read it! (Anyone using SP1 will be taken out back and shot)
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=51486
autobot
DD-WRT Guru


Joined: 07 May 2009
Posts: 1593

PostPosted: Mon Feb 08, 2010 7:35    Post subject: Reply with quote
pgfox46 wrote:
ill send one or donate 100 dollars Canadian for development of proper mlppp support.


See changesets 13848, 13849, and 13850....then donate your $100 to DD-WRT.

Or give it to Tornado, he deserves it based on his tjtag development.

_________________
Eko Builds

BrainSlayer Builds

DD-WRT Changelog RSS Feed
Donny
DD-WRT Guru


Joined: 13 Nov 2008
Posts: 5266
Location: CENTRAL Midnowhere

PostPosted: Sun Feb 14, 2010 20:52    Post subject: Reply with quote
Tried to buy a Fon 2100 and a DWL2100AP on ebay, but I ended up being outbid on both. If anyone has one of these, or a 160n that they want to donate, work can be done on 8 bit jtag.
_________________
Warning: I'm "out of my element!"
http://www.youtube.com/watch?v=MjYJ7zZ9BRw&NR=1

Peacock Thread Sticky- Just read it! (Anyone using SP1 will be taken out back and shot)
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=51486
RogFanther
DD-WRT User


Joined: 24 May 2008
Posts: 156

PostPosted: Sat Feb 20, 2010 21:58    Post subject: Reply with quote
I could get a dwl 2100 here, but don´t know how much the rate is for mailing to Ukraine... ( I´m in Brazil ) ...
pgfox46
DD-WRT User


Joined: 18 Apr 2007
Posts: 70

PostPosted: Thu Feb 25, 2010 23:14    Post subject: Reply with quote
autobot wrote:
pgfox46 wrote:
ill send one or donate 100 dollars Canadian for development of proper mlppp support.


See changesets 13848, 13849, and 13850....then donate your $100 to DD-WRT.

Or give it to Tornado, he deserves it based on his tjtag development.


the only test builds are here
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=31363&postdays=0&postorder=asc&highlight=mlppp&start=120&sid=3f799071b7c77e610b21c8b23e04be3f

and it is not working well yet but get BS or EKO to pm me and commit to mlppp development and i will donate the $200 Canadian for the bounty plus $100 to tornado and i don't evan relay use mlppp. Very Happy
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum