Joined: 10 May 2008 Posts: 1380 Location: Pacific North West, USA
Posted: Tue Jun 29, 2010 20:59 Post subject:
Not sure what Emergency room is?
I tried flashing from DD-WRT interface - didn't work.
I tried the TFTP flash interface - didn't work.
Can you write the steps you did to load the Wive-NG firmware? _________________ Soylent Green Is People !
=-=-=-=-=-=-=-=-=-=-=
Netgear Nighthawk R7000 - DD-WRT Build R46220
Linksys EA8500 - OpenWRT IPQ806x Trunk R16375 5.4 Kernel
5) if you decide to go back to DD-WRT (I Did!) flash back via TFTP recovery method _________________ Soylent Green Is People !
=-=-=-=-=-=-=-=-=-=-=
Netgear Nighthawk R7000 - DD-WRT Build R46220
Linksys EA8500 - OpenWRT IPQ806x Trunk R16375 5.4 Kernel
can I make SD/MMC mod to this router? I have spare SD card.
could somebody compile it for me, or how could i compile it myself? _________________ 1X Unbranded Ralink SoC RT3052 based router (Dead)
1X Wippies Wifibox
1X TP-Link WR-1043ND
Joined: 10 May 2008 Posts: 1380 Location: Pacific North West, USA
Posted: Wed Aug 11, 2010 14:07 Post subject:
You might try and e-mail Brainslayer about that.
Currently, there is no USB support, and am not sure if there will be.
Reason being is that the firmware is already almost maxed out in size.
Because of the 4MB flash chip, it is limited on what can be included.
That being the case, other things would have to be removed in order
for the USB features/options to be enabled/added to the firmware.
Could it be done - MAYBE... how soon - no idea and probably not soon at all. _________________ Soylent Green Is People !
=-=-=-=-=-=-=-=-=-=-=
Netgear Nighthawk R7000 - DD-WRT Build R46220
Linksys EA8500 - OpenWRT IPQ806x Trunk R16375 5.4 Kernel
I'm running version 1.1.15 and the performance is quite nice.
I don't have any sources, but they might be able to assist you with source code. _________________ Soylent Green Is People !
=-=-=-=-=-=-=-=-=-=-=
Netgear Nighthawk R7000 - DD-WRT Build R46220
Linksys EA8500 - OpenWRT IPQ806x Trunk R16375 5.4 Kernel
Hi, few days ago i got this router, but there are issue about firmware upgrade, its wont upgrade throw web gui, i tryed aceex, wive, and so on, but i just got an error "INVALID FILE FORMAT" any solution? Maybe new routers now not with ralink HW ?
Joined: 10 May 2008 Posts: 1380 Location: Pacific North West, USA
Posted: Sun Dec 05, 2010 0:03 Post subject:
Deftas wrote:
Hi, few days ago i got this router, but there are issue about firmware upgrade, its wont upgrade throw web gui, i tryed aceex, wive, and so on, but i just got an error "INVALID FILE FORMAT" any solution? Maybe new routers now not with ralink HW ?
Thanks
I had to do some serial console flashing to get Wive-NG-RTNL loaded on my WHR-G300N
Once I got the 1.1.20 loaded, I was able to keep upgrading via the Web GUI
Serial Console is your friend with the Ralinks! _________________ Soylent Green Is People !
=-=-=-=-=-=-=-=-=-=-=
Netgear Nighthawk R7000 - DD-WRT Build R46220
Linksys EA8500 - OpenWRT IPQ806x Trunk R16375 5.4 Kernel
Depending what router you have, you may have to do some searching on the net
Find out where the serial port is on the pc board
Once you do that and can connect to it via a terminal window,
then you can start experimenting and flashing a different firmware! _________________ Soylent Green Is People !
=-=-=-=-=-=-=-=-=-=-=
Netgear Nighthawk R7000 - DD-WRT Build R46220
Linksys EA8500 - OpenWRT IPQ806x Trunk R16375 5.4 Kernel
But for everyone, worked out flashing by web, so maybe my router not ralink based, anyway any guide about that serial console?
Forget about serial console at this point, the first thing you have to do is open your router and find out what chipset it is based on.
Detailed info about cpu (and radio chip + lan switch if any such chips are present) together with flash and ram chips.
No one will be able to help you if they don't know what hardware you have. _________________ Kernel panic: Aiee, killing interrupt handler!