Author
Message
ekampreet DD-WRT Novice Joined: 23 Mar 2010 Posts: 16
Posted: Mon Jun 14, 2010 18:47 Post subject:
strangely when I installed DD-WRT again , it worked like charm.
thanks guys
Back to top
Sponsor
alstair DD-WRT Novice Joined: 13 May 2010 Posts: 5
Posted: Tue Jun 15, 2010 0:37 Post subject:
kalpik wrote: Can anyone else please confirm if QoS is working or not?
Does not appear so. My connections are reporting a mark of 0 after "cat /proc/net/ip_conntrack"
But hey, a little dd-wrt is better than NO dd-wrt.
Back to top
johnson2008 DD-WRT Novice Joined: 15 Jun 2010 Posts: 1
Posted: Tue Jun 15, 2010 7:16 Post subject:
I have the same problem.
I can't even mount manually in terminal of Telnet.
fengl wrote: buddee wrote: fengl wrote: I flashed the newest (r14594) trx file into RT-N13U and it works. But I don't know know how to mount the USB disk and access the space through ftp. Did anyone have an idea? Thanks a lot!
Not sure if this helps but.....
http://www.dd-wrt.com/wiki/index.php/USB_storage
May reference it, i say this because it can be different on different devices, so you may wanna test and see what works for you.
Here is the information under disk info. All USB Support options were enable.
--- /dev/discs/disc0/disc
Block device, size 3.691 GiB (3963617280 bytes)
DOS/MBR partition map
Partition 1: 3.688 GiB (3959422976 bytes, 7733248 sectors from 8192)
Type 0x0B (Win95 FAT32)
FAT32 file system (hints score 4 of 5)
Volume size 3.684 GiB (3955228672 bytes, 120704 clusters of 32 KiB)
Status: Not mounted
And no NAS tag under service tag.
Back to top
noviolence DD-WRT Novice Joined: 15 Jun 2010 Posts: 1
Posted: Tue Jun 15, 2010 8:13 Post subject:
does this version of dd-wrt on rt-n13u support 3G internet connection?
Back to top
gouryella DD-WRT User Joined: 06 Mar 2010 Posts: 107 Location: Plzeň, CZE
Posted: Tue Jun 15, 2010 8:59 Post subject:
Everything critical working fine for me, except:
* USB mount not working (fs drives missing)
* NG Mixed mode works only as G (fw bug), no problem with N in mixed (B/G/N).
* missing ipkg, ftp (space ?)
How to change txpwr of ralink wifi thru terminal (ssh)? Last edited by gouryella on Mon Jun 21, 2010 10:37; edited 4 times in total
Back to top
ekampreet DD-WRT Novice Joined: 23 Mar 2010 Posts: 16
Posted: Wed Jun 16, 2010 5:10 Post subject:
Anyone able to assign IP To MAC Addresses, as when i tried, the MAC address is saved not the IP. Seems like a bug to me.
Back to top
zubrizavr DD-WRT Novice Joined: 16 Jun 2010 Posts: 7
Posted: Wed Jun 16, 2010 7:48 Post subject: WRT with OpenVPN for RT-N13U
Is the ovenVPN supports by this firmware?
Back to top
gouryella DD-WRT User Joined: 06 Mar 2010 Posts: 107 Location: Plzeň, CZE
Posted: Wed Jun 16, 2010 9:03 Post subject:
ekampreet wrote: Anyone able to assign IP To MAC Addresses, as when i tried, the MAC address is saved not the IP. Seems like a bug to me.
If you mean Static Leases, for me works fine after Save and Reboot. Im using DNSMasq for DHCP and PXE booting.
Back to top
Mr.Smart DD-WRT Novice Joined: 25 Mar 2010 Posts: 1
Posted: Fri Jun 18, 2010 5:36 Post subject: Thank you all
I am really happy that a day when we have the dd-wrt for this router has come. Thanks to everybody.
Back to top
twinclouds DD-WRT Novice Joined: 11 Mar 2010 Posts: 39
Posted: Sun Jun 20, 2010 4:06 Post subject:
I flashed the DD-WRT firmware and everything went through. However, when I enable the USB functions and plugged a ext3 formatted USB hard drive, it was not detected (no information about the hard drive). The same drive was detected by the stock firmware just fine. Anyone has success on the USB hard drive function?
Back to top
twinclouds DD-WRT Novice Joined: 11 Mar 2010 Posts: 39
Posted: Sun Jun 20, 2010 4:11 Post subject:
buddee wrote: fengl wrote: I flashed the newest (r14594) trx file into RT-N13U and it works. But I don't know know how to mount the USB disk and access the space through ftp. Did anyone have an idea? Thanks a lot!
Not sure if this helps but.....
http://www.dd-wrt.com/wiki/index.php/USB_storage
May reference it, i say this because it can be different on different devices, so you may wanna test and see what works for you.
My device with this DD-WRT firmware even didn't detect the drive, so I couldn't go further at all.
Back to top
ekampreet DD-WRT Novice Joined: 23 Mar 2010 Posts: 16
Posted: Sun Jun 20, 2010 5:27 Post subject:
Seems work on HDD is not completed yet , hope developers are looking into the same.
Kudos to developer anyways for doin such a great work.
Back to top
gouryella DD-WRT User Joined: 06 Mar 2010 Posts: 107 Location: Plzeň, CZE
Posted: Sun Jun 20, 2010 7:58 Post subject: USB
USB detection working fine for me, but impossible to mount.
But why USB? no samba, ftp, ipkg inside :(
I thing that in /lib/modules/2.6.23.17/kernel/fs filesystem drivers missing
Edit: 100% succes: mounted fat32 drive by insmoding filesystem drivers from RT-N16 (version magic hack)
Code: 34 2E 31 31 31 20 6D 6F 64 5F 75 6E 6C 6F 61 64 20 4D 49 50 53 33 32 5F 52 31 20 33 32 42 49 54 20
33 2E 31 37 20 6D 6F 64 5F 75 6E 6C 6F 61 64 20 4D 49 50 53 33 32 5F 52 32 20 33 32 42 49 54 20 00
insmod jbd.ko, ext2 no problem
insmod ext3.ko not, need to be compiled as nativ
Code: <6>usb 1-1: new high speed USB device using dwc_otg and address 6
<6>usb 1-1: configuration #1 chosen from 1 choice
<6>scsi4 : SCSI emulation for USB Mass Storage devices
<7>usb-storage: device found at 6
<7>usb-storage: waiting for device to settle before scanning
<5>scsi 4:0:0:0: Direct-Access A-DATA USB Flash Drive 0.00 PQ: 0 ANSI: 2
<5>sd 4:0:0:0: [sda] 63176671 512-byte hardware sectors (32346 MB)
<5>sd 4:0:0:0: [sda] Write Protect is off
<7>sd 4:0:0:0: [sda] Mode Sense: 00 00 00 00
<3>sd 4:0:0:0: [sda] Assuming drive cache: write through
<5>sd 4:0:0:0: [sda] 63176671 512-byte hardware sectors (32346 MB)
<5>sd 4:0:0:0: [sda] Write Protect is off
<7>sd 4:0:0:0: [sda] Mode Sense: 00 00 00 00
<3>sd 4:0:0:0: [sda] Assuming drive cache: write through
<6> /dev/scsi/host4/bus0/target0/lun0: p1
<5>sd 4:0:0:0: [sda] Attached SCSI removable disk
<5>sd 4:0:0:0: Attached scsi generic sg0 type 0
<7>usb-storage: device scan complete
root@dd-wrt:~# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 2688 2688 0 100% /
/dev/discs/disc0/part1
31567360 731520 30835840 2% /opt
root@dd-wrt:~#
next step how to get ipkg working? Last edited by gouryella on Mon Jun 21, 2010 16:50; edited 1 time in total
Back to top
dvijen DD-WRT Novice Joined: 26 Mar 2009 Posts: 12
Posted: Mon Jun 21, 2010 16:32 Post subject: Re: USB
gouryella wrote: USB detection working fine for me, but impossible to mount.
But why USB? no samba, ftp, ipkg inside :(
I thing that in /lib/modules/2.6.23.17/kernel/fs filesystem drivers missing
Edit: 100% succes: mounted fat32 drive by insmoding filesystem drivers from RT-N16 (version magic hack)
Code: 34 2E 31 31 31 20 6D 6F 64 5F 75 6E 6C 6F 61 64 20 4D 49 50 53 33 32 5F 52 31 20 33 32 42 49 54 20
33 2E 31 37 20 6D 6F 64 5F 75 6E 6C 6F 61 64 20 4D 49 50 53 33 32 5F 52 32 20 33 32 42 49 54 20 00
Code: wget http://www.home.karneval.cz/10102207/fat.ko
wget http://www.home.karneval.cz/10102207/vfat.ko
wget http://www.home.karneval.cz/10102207/nls_iso8859-1.ko
wget http://www.home.karneval.cz/10102207/nls_cp437.ko
insmod fat.ko
insmod vfat.ko
insmod nls_iso8859-1.ko
insmod nls_cp437.ko
echo now try to plug in fat/fat32 drive
insmod jbd.ko, ext2 no problem
insmod ext3.ko not, need to be compiled as nativ
Code: <6>usb 1-1: new high speed USB device using dwc_otg and address 6
<6>usb 1-1: configuration #1 chosen from 1 choice
<6>scsi4 : SCSI emulation for USB Mass Storage devices
<7>usb-storage: device found at 6
<7>usb-storage: waiting for device to settle before scanning
<5>scsi 4:0:0:0: Direct-Access A-DATA USB Flash Drive 0.00 PQ: 0 ANSI: 2
<5>sd 4:0:0:0: [sda] 63176671 512-byte hardware sectors (32346 MB)
<5>sd 4:0:0:0: [sda] Write Protect is off
<7>sd 4:0:0:0: [sda] Mode Sense: 00 00 00 00
<3>sd 4:0:0:0: [sda] Assuming drive cache: write through
<5>sd 4:0:0:0: [sda] 63176671 512-byte hardware sectors (32346 MB)
<5>sd 4:0:0:0: [sda] Write Protect is off
<7>sd 4:0:0:0: [sda] Mode Sense: 00 00 00 00
<3>sd 4:0:0:0: [sda] Assuming drive cache: write through
<6> /dev/scsi/host4/bus0/target0/lun0: p1
<5>sd 4:0:0:0: [sda] Attached SCSI removable disk
<5>sd 4:0:0:0: Attached scsi generic sg0 type 0
<7>usb-storage: device scan complete
root@dd-wrt:~# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 2688 2688 0 100% /
/dev/discs/disc0/part1
31567360 731520 30835840 2% /opt
root@dd-wrt:~#
can u post step by step to get it working?
thanks
dvijen
next step how to get ipkg working?
Back to top
gouryella DD-WRT User Joined: 06 Mar 2010 Posts: 107 Location: Plzeň, CZE
Posted: Mon Jun 21, 2010 16:38 Post subject:
Just enable USB core support in GUI and connect to RT-N13U by putty and type:
Code: wget http://www.home.karneval.cz/10102207/fat.ko
wget http://www.home.karneval.cz/10102207/vfat.ko
wget http://www.home.karneval.cz/10102207/nls_iso8859-1.ko
wget http://www.home.karneval.cz/10102207/nls_cp437.ko
wget http://www.home.karneval.cz/10102207/ext2.ko
insmod fat.ko
insmod vfat.ko
insmod nls_iso8859-1.ko
insmod nls_cp437.ko
insmod ext2.ko
echo now try to plug in fat/fat32/ext2 drive
that's all but as i say no ipkg, samba no fun
Back to top