[realdreams]

[jimmyok]

ipkg install coreutils

cd /opt/bin

ls | grep core| while read line; do newname=$(echo line | cut -d"-" -f2); ln $line $newname;done

the above should all be on the same line. then run sh /tmp/prep_optware again and it now works.

[realdreams]

I am trying to get ipkg installed. Can I mount cifs/nfs on a freenas box as /opt?

Where can I find release notes for official builds?

In build DD-WRT v24-sp2 (07/20/12) std - build 19519 for Asus RT-N13U B1, I cannot find jffs support under administration and it seems jffs does not work out of box. Am I missing something? The wiki says jffs support was removed for 4MB flash build but it shouldn't be a problem for B1.


When I tried to mount an ext3 partition on a usb flash drive, I see this
"/dev/sda1 on /tmp/mnt/sda_part1 type ext2 (rw,relatime,errors=continue)"
I used the driver at http://home.karneval.cz/10102207/fs.gz, why is the ext3 partition recognized as ext2?

BTW gouryella could you change the code in optware-install.sh so it can detect the gateway address instead of using 192.168.1.1?
Thanks

[st07]

[realdreams]

Mem: 26884K used, 35060K free, 0K shrd, 2900K buff, 11272K cached
CPU: 0.3% usr 0.0% sys 0.0% nic 99.6% idle 0.0% io 0.0% irq 0.0% sirq
Load average: 0.07 0.11 0.46 1/41 14560
PID PPID USER STAT VSZ %VSZ CPU %CPU COMMAND
14560 14559 root R 1300 2.0 0 0.2 top
14558 13364 root S 1260 2.0 0 0.2 dropbear -b /tmp/loginprompt -r /
13866 1 root S 2396 3.8 0 0.0 httpd -p 80
13872 1 root S 2040 3.2 0 0.0 httpd -S
14066 1 root S 1540 2.4 0 0.0 upnp -D -W vlan2
13878 1 root S 1532 2.4 0 0.0 resetbutton
13392 1 root S 1464 2.3 0 0.0 ttraff
13876 1 root S 1460 2.3 0 0.0 process_monitor
13887 1 root S 1416 2.2 0 0.0 inadyn -u home.2012v6.com -p XpXD
1 0 root S 1388 2.2 0 0.0 /sbin/init noinitrd
14559 14558 root S 1300 2.0 0 0.0 -sh
13364 1 root S 1216 1.9 0 0.0 dropbear -b /tmp/loginprompt -r /
13332 1 root S 896 1.4 0 0.0 dnsmasq --conf-file=/tmp/dnsmasq.
251 1 root S 804 1.3 0 0.0 /sbin/hotplug2 --set-rules-file /
14241 1 root S 792 1.2 0 0.0 udhcpc -i vlan2 -p /var/run/udhcp
13346 1 root S 792 1.2 0 0.0 cron
13356 1 root S 772 1.2 0 0.0 {p910nd} p9100d -f /dev/lp0 0 -t
30 2 root SW 0 0.0 0 0.0 [kworker/0:1]
3 2 root SW 0 0.0 0 0.0 [ksoftirqd/0]
^C 28 2 root SW 0 0.0 0 0.0 [mtdblock4]

https is not working


OpenSSL> s_client -connect 192.168.3.1:443 -state -debug
Loading 'screen' into random state - done
CONNECTED(00000104)
SSL_connect:before/connect initialization
write to 0x83d228 [0x759240] (210 bytes => 210 (0xD2))
numbers....
00d2 - <SPACES/NULS>
SSL_connect:SSLv2/v3 write client hello A
read from 0x83d228 [0x75e7a0] (7 bytes => 0 (0x0))
1552:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:.\ssl\s23_l
.c:177:
---
no peer certificate available
---
No client certificate CA names sent
---
SSL handshake has read 0 bytes and written 210 bytes
---
New, (NONE), Cipher is (NONE)
Secure Renegotiation IS NOT supported
Compression: NONE
Expansion: NONE
---
error in s_client

https dies after a while(happens every day),
stopservice httpd
startservice httpd
fixes the problem... but this is annoying....

[realdreams]

OpenVPN does not work in build
DD-WRT v24-sp2 (07/20/12) std - build 19519

TLS_ERROR: BIO read tls_read_plaintext error: error:1408F119:lib(20):func(143):reason(281)


I am getting this error after certificate verification ok


TLS_ERROR: BIO read tls_read_plaintext error: error:1408F119:lib(20):func(143):reason(281)
Tue Sep 11 09:45:03 2012 us=568398 192.168.3.150:57073 TLS Error: TLS object -> incoming plaintext read error
Tue Sep 11 09:45:03 2012 us=568602 192.168.3.150:57073 TLS Error: TLS handshake failed
Tue Sep 11 09:45:03 2012 us=570124 192.168.3.150:57073 SIGUSR1[soft,tls-error] received, client-instance restarting

OS:dd-wrt 3.2.23-svn19518 #1369 Fri Jul 20 13:15:41 CEST 2012 mips GNU/Linux

openvpn version:
OpenVPN 2.2.1 mipsel-linux [SSL] [LZO2] [EPOLL] built on Jul 20 2012
Originally developed by James Yonan
Copyright (C) 2002-2010 OpenVPN Technologies, Inc. <sales@openvpn.net>

$ ./configure --host=mipsel-linux --exec-prefix=/usr --prefix=/ --disable-avahi --disable-cups --disable-pie --disable-relro --disable-static --disable-swat --disable-shared-libs --with-codepagedir=/etc/samba --with-configdir=/etc/samba --with-included-iniparser --with-included-popt --with-lockdir=/var/lock --with-logfilebase=/var/log --with-nmbdsocketdir=/var/nmbd --with-piddir=/var/run --with-privatedir=/etc/samba --with-sendfile-support --without-cluster-support --without-ads --without-krb5 --without-ldap --without-pam --without-winbind --without-libtdb --without-libtalloc --without-libnetapi --without-libsmbclient --without-libsmbsharemodes --without-libaddns --with-shared-modules=pdb_tdbsam,pdb_wbc_sam,idmap_nss,nss_info_template,auth_winbind,auth_wbc,auth_domain --host=mipsel-linux CPPFLAGS=-I../lzo/include -I/home/seg/DEV/rt2880/src/router/openssl/include -L../lzo -Lopenssl -L../lzo/src/.libs --enable-pthread --disable-plugins --enable-debug --enable-password-save --enable-management --enable-lzo --enable-server --enable-multihome --with-ssl-headers=/home/seg/DEV/rt2880/src/router/openssl/include --with-ssl-lib=openssl --with-ssl-type=openssl CFLAGS=-Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves -DNEED_PRINTF -ffunction-sections -fdata-sectio
Compile time defines: ENABLE_CLIENT_SERVER ENABLE_DEBUG ENABLE_FRAGMENT ENABLE_HTTP_PROXY ENABLE_MANAGEMENT ENABLE_MULTIHOME ENABLE_PASSWORD_SAVE ENABLE_PORT_SHARE ENABLE_SOCKS USE_CRYPTO USE_LZO USE_SSL


Exactly same configuration works fine in an earlier version

OpenVPN 2.2.0 mipsel-linux [SSL] [LZO2] [EPOLL] [eurephia] built on Feb 16 2012
Originally developed by James Yonan
Copyright (C) 2002-2010 OpenVPN Technologies, Inc. <sales@openvpn.net>

$ ./configure --build=i386-pc-linux-gnu --host=mipsel-linux --target=mipsel-linux --prefix=/opt --disable-nls --enable-password-save

Compile time defines: ENABLE_CLIENT_SERVER ENABLE_DEBUG ENABLE_EUREPHIA ENABLE_FRAGMENT ENABLE_HTTP_PROXY ENABLE_MANAGEMENT ENABLE_MULTIHOME ENABLE_PASSWORD_SAVE ENABLE_PORT_SHARE ENABLE_SOCKS USE_CRYPTO USE_LIBDL USE_LZO USE_SSL

[togoff]

Please restore http://home.karneval.cz/10102207/kmod-usbsound_2.6.23.17_mipsel.ipk

[crakarjax]

[crakarjax]

I have a 3Tb drive connected right now and it seems that there is no support for large volumes? I can't mount a 2.7Tb partition. Does anyone have a workaround or am I sol and need to get a different device?

[crakarjax]

[crakarjax]

[jmflu]

My n13U stopped working after about a month and kept resetting itself.

Now when I try and unplug and replug power only the power light will come on. It won't broadcast Wireless, connecting through ethernet gives "No Network Access" - so I cant even get to the router settings.

Hard reset seems to do nothing.

WHats going on here??

[yutoon]

[busybuzy]

I have a V1 router. I have been running r14896 for a long time (well over a year). My current status page
shows it has been up for 95 days. I love the compact size of the router.

However, I have had a problem that was bugging me since day 1 - VPN connection (from my laptop to my
work) is bad over wireless. Most of the time I cannot connect. If I do, VNC session is unbearable. However,
everything else over wireless is fine. I cannot understand this at all. I ended up setting up an AP
using another wireless router running Tomato.

Lately, I needed an ftp server so I am looking into upgrading firmware at the same time. I see a few
versions being mentioned lately

r15962 is used by hack_1018 and reported some issue with Transmission, which I don't use.

r16994 is recommended by Wiki, not sure when it was updated

r17201 is used for modded firmware and asusno1 reported it is "very buggy". Not sure what.

r18024 is reported by hunnypuppy as "rock solid" with issue on DHCP / DNSMasq. This is an issue for me as I
have "Use DNSMasq for DHCP".

realdreams reported DDNS is broken in r17027. I use DDNS so it is a concern for me. Not sure what is
broken though.

No version beyond r18024 is available to the V1 so I have to watch what I eat. The feature that I care
about are wireless-N / DDNS / DHCP / SSH / PPTP / port forwarding.

Please recommend a version.

[busybuzy]

Looks like a no go for me:

http://svn.dd-wrt.com/ticket/2061

DDNS issue from r16994 (inclusive) til before r18024. Then I see:

"The bad news is that 18024 mega breaks *tons* of other things (at least on an ASUS N16). SSHD/dropbear doesn't work at all, QoS is also problematic, PPoE, JFFS and tons of other things. If you think inadyn issue is frustrating, wait till you try 18024."

I don't know if it is specific to mega but I cannot live without SSH.