Will dd-wrt support RT-N13U?

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware
Goto page 1, 2, 3 ... 57, 58, 59  Next
Author Message
zhz8521
DD-WRT Novice


Joined: 09 Jan 2009
Posts: 1

PostPosted: Thu Nov 26, 2009 10:11    Post subject: Will dd-wrt support RT-N13U? Reply with quote
The ASUS RT-N13U is based on Ralink 3052 and it has 4Mb flash and 32Mb RAM. The same chip is used on DIR-600, DIR-615 and WHR-G300N. So will dd-wrt support the RT-N13U?
I think it cannot work if I use the bin file of DIR-600 directly. It maybe need a .trx file.
Sponsor
lytton
DD-WRT Novice


Joined: 02 Dec 2009
Posts: 1

PostPosted: Wed Dec 02, 2009 7:31    Post subject: Re: Will dd-wrt support RT-N13U? Reply with quote
zhz8521 wrote:
The ASUS RT-N13U is based on Ralink 3052 and it has 4Mb flash and 32Mb RAM. The same chip is used on DIR-600, DIR-615 and WHR-G300N. So will dd-wrt support the RT-N13U?
I think it cannot work if I use the bin file of DIR-600 directly. It maybe need a .trx file.


Hope they will, just bought one last week for $40.
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17473
Location: Hesse/Germany

PostPosted: Thu Dec 03, 2009 8:34    Post subject: Reply with quote
no donated device no support
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
slaveunit
DD-WRT User


Joined: 06 Sep 2008
Posts: 163

PostPosted: Thu Dec 03, 2009 11:33    Post subject: Reply with quote
Personally I am pretty filled up with routers. But if anyone is going to donate one to Sash/Brainslayer I would say now is the time. They are $21 AR at buy.com right now.


http://www.buy.com/prod/the-802-11n-multi-functional-wl-router/q/loc/101/211874047.html?adid=17654
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17473
Location: Hesse/Germany

PostPosted: Sun Dec 06, 2009 13:31    Post subject: Reply with quote
this unit is about 85€ here in germany.
so it would be nice if someone could pick it up for $25 and sent t to us.

else we can collect the money

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
gobi
DD-WRT Novice


Joined: 12 Dec 2009
Posts: 1

PostPosted: Sat Dec 12, 2009 16:57    Post subject: Flashing DIR-615 web flash? Reply with quote
I was just wondering because D-link DIR615 uses the same chip (RT3052). It also has the same amount of flash and memory. Is the web flash version the same as the other firmwares with a hex tag added to make the d-link recognize it as a dir615 firmware? If this is true does that mean I can take the dir615 ddwrt web flash and modify the appropriate hex and rename to .trx to make it flashable on rt-n13u. This is a really good piece of hardware for the price that some people are getting it for. Plus it has a USB and is N-draft 2.0 router. The Asus firmware already has support for USB storage and Download Master(BT,HTTP,FTP). The firmware is really buggy though and it would be nice to get DD-WRT running on it with optware packages as a replacement. Thanks:)
Ajay.patt
DD-WRT Novice


Joined: 04 Jan 2010
Posts: 1

PostPosted: Mon Jan 04, 2010 13:19    Post subject: dd-wrt support for Asus RT-N13U Reply with quote
Hello guys,

I am very new to linux and dd-wrt and but got really very nice reviews about dd-wrt functionality and their developer team.

Recently I bought Asus rt-n13u and I want to install dd-wrt magic firmware.

does anybody know when can it available or is it allready available?


Thank you
digiland
DD-WRT Novice


Joined: 13 Sep 2009
Posts: 1

PostPosted: Fri Feb 05, 2010 1:45    Post subject: Re: dd-wrt support for Asus RT-N13U Reply with quote
Ajay.patt wrote:
Hello guys,

I am very new to linux and dd-wrt and but got really very nice reviews about dd-wrt functionality and their developer team.

Recently I bought Asus rt-n13u and I want to install dd-wrt magic firmware.

does anybody know when can it available or is it allready available?


Thank you

It's available.
BrainSlayer build 13832 - 02/03/10 ASUS RT-N13U
outfire
DD-WRT Novice


Joined: 05 Feb 2010
Posts: 47

PostPosted: Fri Feb 05, 2010 4:24    Post subject: Reply with quote
Hey Digilink,

I followed the link for ddwrt firmware that you gave us and i download it. However, i dont know it is me or it is the file. Whenever, i try to upload the trx file, got a msg of incorrect image file.

I followed the wiki on how to installed the firmware. I had tried tftp and web gui, but it retry for ever without success in tftp, and for web gui, it gave me msg of incorrect image. Can someone show me how to do it correct if i had did it wrong?
changeway
DD-WRT Novice


Joined: 30 Dec 2009
Posts: 21

PostPosted: Fri Feb 05, 2010 5:42    Post subject: Reply with quote
outfire wrote:
Hey Digilink,

I followed the link for ddwrt firmware that you gave us and i download it. However, i dont know it is me or it is the file. Whenever, i try to upload the trx file, got a msg of incorrect image file.

I followed the wiki on how to installed the firmware. I had tried tftp and web gui, but it retry for ever without success in tftp, and for web gui, it gave me msg of incorrect image. Can someone show me how to do it correct if i had did it wrong?


I upgrade trx file fail, too.

My serial console message is


## Booting image at bf050000 ...
Image Name: DD-WRT v24 Linux Kernel Image
Created: 2010-02-03 19:50:51 UTC
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 922151 Bytes = 900.5 kB
Load Address: 80000000
Entry Point: 802a9000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 802a9000) ...
## Giving linux memsize in MB, 32

Starting kernel ...


LINUX started...

THIS IS ASIC
Linux version 2.6.23.17 (root@dd-wrt) (gcc version 4.1.2) #1906 Wed Feb 3 20:48:43 CET 2010

The CPU frequency set to 384 MHz
32M RAM Detected!
CPU revision is: 0001964c
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
Built 1 zonelists in Zone order. Total pages: 8128
Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock4 rootfstype=squashfs noinitrd
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 16kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
cause = 90800000, status = 1100ff00
PID hash table entries: 128 (order: 7, 512 bytes)
calculating r4koff... 003a9800(3840000)
CPU frequency 384.00 MHz
Using 192.000 MHz high precision timer.
Console: colour dummy device 80x25
console [ttyS1] enabled
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 29224k/32768k available (2316k kernel code, 3544k reserved, 403k data, 124k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
Generic PHY: Registered new driver
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
Time: MIPS clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
Load RT2880 Timer Module(Wdg/Soft)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.0 (2006/03/15) Phillip Lougher
io scheduler noop registered
io scheduler deadline registered (default)
Ralink gpio driver initialized
Serial: 8250/16550 driver $Revision: 1.3 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0xb0000500 (irq = 37) is a 16550A
serial8250: ttyS1 at I/O 0xb0000c00 (irq = 12) is a 16550A
rt3052 access driver initialization.
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
MPPE/MPPC encryption/compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V1.0
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ralink flash device: 0x1000000 at 0xbf000000
Ralink SoC physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.

found squashfs at 132000
Creating 6 MTD partitions on "Ralink SoC physically mapped flash":
0x00000000-0x00030000 : "uboot"
0x00030000-0x00040000 : "uboot-config"
0x00040000-0x00050000 : "factory-defaults"
0x00050000-0x003f0000 : "linux"
0x00132000-0x003f0000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x003f0000-0x00400000 : "nvram"
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core
dwc_otg: version 2.72a 24-JUN-2008
DWC_otg: Core Release: 2.66a
DWC_otg: Periodic Transfer Interrupt Enhancement - disabled
DWC_otg: Multiprocessor Interrupt Enhancement - disabled
DWC_otg: Using DMA mode
DWC_otg: Device using Buffer DMA mode
dwc_otg lm0: DWC OTG Controller
dwc_otg lm0: new USB bus registered, assigned bus number 1
dwc_otg lm0: irq 18, io mem 0x00000000
DWC_otg: Init: Port Power? op_state=1
DWC_otg: Init: Power Port (0)
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
u32 classifier
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
ctnetlink v0.93: registering with nfnetlink.
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
IPP2P v0.8.2 loading
ClusterIP Version 0.8 loaded successfully
TCP bic registered
TCP cubic registered
TCP westwood registered
TCP highspeed registered
TCP hybla registered
TCP htcp registered
TCP vegas registered
TCP scalable registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Welcome to PF_RING 3.2.1
(C) 2004-06 L.Deri <deri@ntop.org>
NET: Registered protocol family 27
PF_RING: bucket length 128 bytes
PF_RING: ring slots 4096
PF_RING: sample rate 1 [1=no sampling]
PF_RING: capture TX No [RX only]
PF_RING: transparent mode Yes
PF_RING initialized correctly.
PF_RING: registered /proc/net/pf_ring/
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
GDMA1_MAC_ADRH -- : 0x00000000
GDMA1_MAC_ADRL -- : 0x00000000
Ralink APSoC Ethernet Driver Initilization. v2.00 256 rx/tx descriptors allocated, mtu = 1500!
NAPI enable, weight = 0, Tx Ring = 256, Rx Ring = 256
GDMA1_MAC_ADRH -- : 0x00000030
GDMA1_MAC_ADRL -- : 0x4f000006
PROC INIT OK!
decode /dev/mtdblock4
attempt to access beyond end of device
mtdblock4: rw=0, want=5622, limit=5616
SQUASHFS error: sb_bread failed reading block 0xafa
SQUASHFS error: unable to read uid/gid table
List of all partitions:
1f00 192 mtdblock0 (driver?)
1f01 64 mtdblock1 (driver?)
1f02 64 mtdblock2 (driver?)
1f03 3712 mtdblock3 (driver?)
1f04 2808 mtdblock4 (driver?)
1f05 64 mtdblock5 (driver?)
No filesystem could mount root, tried: squashfs
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,4)
Rebooting in 1 seconds..
surajitbaral
DD-WRT Novice


Joined: 05 Feb 2010
Posts: 2

PostPosted: Fri Feb 05, 2010 15:08    Post subject: Reply with quote
Is anybody able to flash Asus RT-N13U with dd-wrt yet?? If yes, could you please explain the procedure step by step?? Thanks in advance.
outfire
DD-WRT Novice


Joined: 05 Feb 2010
Posts: 47

PostPosted: Fri Feb 05, 2010 21:06    Post subject: Reply with quote
Nope, I havent successfully upgraded the firmware. Every time I tried to upgrade it, keep getting msg of unknown image error. If anyone know how or have succeed the installation, please post your procedure.
outfire
DD-WRT Novice


Joined: 05 Feb 2010
Posts: 47

PostPosted: Sat Feb 06, 2010 16:18    Post subject: Reply with quote
Had anyone successfully installed dd-wrt firmware onto rt-n13u?? If so, please help me how to install it on mine.
sid222
DD-WRT Novice


Joined: 06 Feb 2010
Posts: 3

PostPosted: Sat Feb 06, 2010 22:39    Post subject: RE: dd-wrt support for Asus RT-N13U Reply with quote
I was able to load the firmware asus-to-ddwrt.trx using the firmware restoration it states -------system recover succeeds please wait for system reboot
After reboot the router lost all functionality the power light blink every 6 seconds I had to load back original firmware to get back on line.
I tried Asus-RTN13U-webflash.bin same results.
It’s time for the pro on this one.
Thanks to all the hardworking people on this Forum.
outfire
DD-WRT Novice


Joined: 05 Feb 2010
Posts: 47

PostPosted: Mon Feb 08, 2010 1:27    Post subject: Reply with quote
Sorry for the keep posting and asking questions Admin/user. Does anyone get ddwrt's firmware to be install onto the rt-n13u successfully?
Goto page 1, 2, 3 ... 57, 58, 59  Next Display posts from previous:    Page 1 of 59
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum