Hey guys, just wondering... In the first post, "Buffalo WHR-HP-G125" is listed as a supported device. Is this a typo? Because I couldn't find such a device.
The reason I ask is because I have a Buffalo WHR-G125, and I am wondering if I could run K26 on my device?
I quote LOM from page 12:
"Buffalo WHR-G125 works when replacing the original cfe with the cfe that Tornado has made for WRT54G v8.
Only the board data from the original cfe has to be moved over to Tornado's cfe."
I am not sure how to do this... Has this issue been fixed since March? If so, I'd appreciate it if anybody could point me in the right direction on which file to install on my router. That is, of course, if I would benefit at all from running K26 on my device (since it is relatively old).
looks like GS 1.0 is K2.6 supported. i installed openwrt Kernel 2.6 on it. there was only a wifi driver issue. same may count for dd-wrt builds..
The wifi driver is a primary factor in whether a model can run the k2.6 builds or not. The NEWD2 driver is BIG and LOM figured out that the older CFE's don't provide enough space to load the kernel with the big fat NEWD2 driver. You can't tell if DD-WRT k2.6 builds will run on a model based on your experiences with other firmwares... _________________ Read the forum announcements thoroughly! Be cautious if you're inexperienced.
Available for paid consulting. (Don't PM about complicated setups otherwise)
Looking for bricks and spare routers to expand my collection. (not interested in G spec models)
My Asus WL-520GU has a CFE version 4.131.31.0, newer than what said in previous post.
I can't test the ram values because i don't have serie or jtag cable.
Do you think it will support the k26?
I've just send it to the Cfe collection project.
If someone else wants it, pm me and i will send it to you.
My Asus WL-520GU has a CFE version 4.131.31.0, newer than what said in previous post.
Do you think it will support the k26?
No it will not, it is copied to ram in such a way that it doesn't give enough room for loading a bigger build like K26. _________________ Kernel panic: Aiee, killing interrupt handler!
Joined: 06 Feb 2010 Posts: 7401 Location: Little Rock
Posted: Mon Sep 06, 2010 13:13 Post subject:
franciz wrote:
My Asus WL-520GU has a CFE version 4.131.31.0, newer than what said in previous post.
I can't test the ram values because i don't have serie or jtag cable.
Do you think it will support the k26?
I've just send it to the Cfe collection project.
If someone else wants it, pm me and i will send it to you.
I pm'd you about this some days ago, still nothing, and i do not see where you added it to the CFE collection, or i would have downloaded it there.
I send it twice to the yahoo.co.uk mail and they both came back rejected. Now i'm uploading it to the ftp.
By the way, how the hell do i read the pm's in this forum??
ASUS WL-520GU 4.131.31.0.bin
Description:
Model: ASUS WL-520GU FCCID: MSQWL520GUGC Mode of backup: http://192.168.1.1/backup/cfe.bin flash chip data: I can't open it right now, if you need the info, ask and i'll open it.
Joined: 06 Mar 2007 Posts: 2 Location: San Francisco Bay area
Posted: Wed Sep 22, 2010 6:12 Post subject: wrt600n and k2.6
I want to use the usb port on my wrt600n v1.1 and my unlimited 3G android phone as my home wifi and my path to the internet wan, respectively. Is anyone working on this? How would I check progress on this issue? I can't afford to brick this device and I have no jtag to unbrick it.