VLAN Help

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Author Message
jasongt
DD-WRT Novice


Joined: 04 Sep 2006
Posts: 4

PostPosted: Mon Sep 16, 2013 12:49    Post subject: VLAN Help Reply with quote
I need to know if this is possible and if so a little help with VLAN setup as I haven't wrapped my mind around how it's setup on these devices. So here is what I need to know if it's possible to do with DD-WRT and VLANS..

I have a router and managed switch in place that is already setup and working with VLANS and leaving a port or several ports I want to Tag VLAN's 3,4,5 and VLAN 1 will be untagged. So the first port set like this will go to a Linksys E1000 v2.1 LAN port 1. I want to setup two SSID with one linking to say VLAN 3 and the other VLAN 4. I want it so that no management can be done except on VLAN 5 and would prefer that the device is not even seen or have an IP on VLAN 3 and 4. LAN port 2 on this E1000 will go to another E1000's LAN port 1 and needs to be setup just like the first E1000's above and it will link to another just like the first one. So is this possible so far and what if the VLANS used were 30, 40 and 50 is that possible or do they have to be like 1-8?

E1000
Port VTag VUntagged
1 3,4,5 1
2 3.4.5 1
SSID1 3
SSID2 4


The second port on my managed switch will be set the same as the one above but going to a linksys WRT54GS v1.0 LAN port 1. This device is being used as a switch to carry VLAN traffic to the other ports and SNMP no other features setup and would like for it to be unseen and only configurable on VLAN 5. So really if all ports including WAN if possible would accept VLAN 1 untagged, and TAG 3, 4, 5 it would be great. Wireless is not used on this device.

WRT54GS
Port VTag VUntagged
1 3,4,5 1
2 3.4.5 1
3 3.4.5 1
4 3.4.5 1
Wan 3,4,5 1
No Wireless


If any other info is needed just let me know. And all help is greatly appreciated.

Thanks
Jason
Sponsor
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 6856
Location: Romerike, Norway

PostPosted: Sat Sep 21, 2013 13:05    Post subject: Reply with quote
http://www.vspecialist.co.uk/creating-vlans-in-dd-wrt-part-1/
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum