WNR1000v2-VC (ar7240) U-boot dni7 V0.8
DRAM:
sri
#### TAP VALUE 1 = b, 2 = c
32 MB
Top of RAM usable for U-Boot at: 82000000
Reserving 269k for U-Boot at: 81fbc000
Reserving 192k for malloc() at: 81f8c000
Reserving 44 Bytes for Board Info at: 81f8bfd4
Reserving 36 Bytes for Global Data at: 81f8bfb0
Reserving 128k for boot params() at: 81f6bfb0
Stack Pointer at: 81f6bf98
Now running in RAM - U-Boot at: 81fbc000
id read 0x100000ff
flash size 4194304, sector count = 64
Flash: 4 MB
In: serial
Out: serial
Err: serial
Net: ag7240_enet_initialize...
No valid address in Flash. Using fixed address
No valid address in Flash. Using fixed address
: cfg1 0xf cfg2 0x7014
eth0: 00:03:7f:09:0b:ad
eth0 up
: cfg1 0xf cfg2 0x7214
eth1: 00:03:7f:09:0b:ad
ATHRS26: resetting s26
ATHRS26: s26 reset done
eth1 up
eth0, eth1
Trying eth1
eth1 link down
FAIL
Trying eth0
eth0 link down
FAIL
Client starts...[Listening] for ADVERTISE...TTT
Retry count exceeded; boot the image as usual
nmrp server is stopped or failed !
Hit any key to stop autoboot: 0
Verifying Checksum ... OK
### SQUASHFS loading 'image/uImage' to 0x80800000
### SQUASHFS load complete: 693673 bytes loaded to 0x80800000
## Booting image at 80800000 ...
Image Name: Linux Kernel Image
Created: 2014-08-18 14:45:58 UTC
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 693609 Bytes = 677.4 kB
Load Address: 80002000
Entry Point: 80203000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80203000) ...
## Giving linux memsize in bytes, 33554432