[halogen8]

I have a Nokia IP110 that I'm trying to install dd-wrt on. The device is listed has compatible in the hardware database, but I'm running into the problem of the 3 onboard NIC's not have MAC addresses.

I can install m0n0wall on it, using the <spoofmac> command in the xml file, but I can't figure a way to do the same with dd-wrt. Does anyone know how to install on this hardware?

Thanks.

[Sash]

hmm

have i tried setting mac's using ifconfig?

[halogen8]

I actually did try setting the MAC with ifconfig, but no luck.

I'm posting this in hopes that I help someone who tries this in the future.

I used these directions: http://forum.m0n0.ch/index.php/topic,1471.0.html

Which basically have you setup a DOS bootable CF card, with an Intel utility and an autoexec files that executes the Intel utility to write a MAC address to each of the NIC's. This written address will stick, even after the device looses power.

However, the only useful router I was able to install was DD-WRT. And unfortunately had problems differentiating between the LAN and WAN ports in the config. I'm sure someone can do it, but this is where I'm giving up.

Good luck!