[methodman]

BY MOD: http://www.dd-wrt.com/phpBB2/viewtopic.php?p=529137

Right following on from Sash comments.

I'm trying to get RB800 working with DD-wrt.

So far I've flashed A CF and with DD-wrt (using PhyGUI 0.52 on Windows 7)
I'm using the full serial Image of dd-wrt

Just checking for anything activity on the eth ports.

[methodman]

Ok I've tested all ports on 192.168.1.1 - for the router - but no luck.
I don't have a serial cable, so any ideas?

[Sash]

put in a mpci wifi atheros card and check if wifi is starting

[methodman]

Hi Sash,

Did you get my PM - I'll be picking up a serial cable later. But for now is there anything I can do to test?
The wireless card inside the unit is Mikrotik 52n.

I've flashed the image again and about to start it.
There is a microswitch (S1) on the unit, I haven't pressed it yet but i believe that takes you to the boot menu, once the serial cable is in?

[methodman]

Ok after installing that image you've sent me - I cant see the wireless card in the unit.

But when using winbox - can see the unit's MAC address, but ip address is 0.0.0.0 - no OS looks like its detected.

[methodman]

Just to give everyone an update - using Sashs test image we've got activity but really waiting on Sash to come back with a reply if it do-able to port over.

[Sash]

i sent the log to the dev´s....

[methodman]

Any idea on how long they will take to come back with an answer? My only issue that I need to return the unit if there is no chance of it working.

[methodman]

I'm a little confused - on the router database it states that RB's are not supported but in the wiki:

http://www.dd-wrt.com/wiki/index.php/Supported_Devices#Mikrotik_Routerboard

It states some work others are WIP - so what is more up-to-date?

[Sash]

which wifi card did u use?

do a boot and gimme your system code. i will activate it.

then gimme form the command line

[methodman]

PM sent.

[Sash]

[methodman]

Here is the log for the unit running all three commands.

[methodman]

Image no 2:

io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
serial8250.0: ttyS0 at MMIO 0xe0004500 (irq = 42) is a 16550A
console handover: boot [udbg0] -> real [ttyS0]
Gianfar MII Bus: probed
eth0: Gianfar Ethernet Controller Version 1.2, 00:0c:42:72:ec:05
eth0: Running with NAPI disabled
eth0: 64/64 RX/TX BD ring size
eth1: Gianfar Ethernet Controller Version 1.2, 00:0c:42:72:ec:06
eth1: Running with NAPI disabled
eth1: 64/64 RX/TX BD ring size
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
MPPE/MPPC encryption/compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V1.0
IMQ starting with 2 devices...
IMQ driver loaded successfully.
Hooking IMQ before NAT on PREROUTING.
Hooking IMQ after NAT on POSTROUTING.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
RB_PPC CF
CF: using Local-Bus clock 99999 kHz 10000 ps
CF: irq level 1
scsi0 : pata_rb_ppc
ata1: PATA max PIO6 cmd 0x40000000 ctl 0x4000000e bmdma 0x00000000 irq 19
ata1.00: CFA: SanDisk SDCFB-1024, HDX 3.15, max MWDMA2
ata1.00: 2001888 sectors, multi 0: LBA
CF PIO mode changed to 4
ata1.00: configured for PIO4
scsi 0:0:0:0: Direct-Access ATA SanDisk SDCFB-10 HDX PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 2001888 512-byte hardware sectors (1025 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 2001888 512-byte hardware sectors (1025 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
/dev/scsi/host0/bus0/target0/lun0: p1 p2
sd 0:0:0:0: [sda] Attached SCSI removable disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
u32 classifier
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
ctnetlink v0.93: registering with nfnetlink.
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
IPP2P v0.8.2 loading
ClusterIP Version 0.8 loaded successfully
TCP bic registered
TCP cubic registered
TCP westwood registered
TCP highspeed registered
TCP hybla registered
TCP htcp registered
TCP vegas registered
TCP scalable registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Welcome to PF_RING 3.2.1
(C) 2004-06 L.Deri <deri@ntop.org>
NET: Registered protocol family 27
PF_RING: bucket length 128 bytes
PF_RING: ring slots 4096
PF_RING: sample rate 1 [1=no sampling]
PF_RING: capture TX No [RX only]
PF_RING: transparent mode Yes
PF_RING initialized correctly.
PF_RING: registered /proc/net/pf_ring/
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (ext2 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 132k init
start service
starting Architecture code for rb600
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
Linux Tulip driver version 1.1.15 (Feb 27, 2007)
ifconfig: SIOCSIFHWADDR: No such device
ifconfig: SIOCSIFHWADDR: No such device
ifconfig: SIOCSIFHWADDR: No such device
ifconfig: SIOCSIFHWADDR: No such device
ifconfig: SIOCSIFHWADDR: No such device
ifconfig: SIOCSIFHWADDR: No such device
load ATH 802.11 a/b/g Driver
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 2009-05-08 (AR5210, AR5211, AR5212, AR9160, AR9280, RF5111, RF5112, RF2413, RF5413, RF2425, XR)
ath_pci: svn r580
wlan: svn r580
wlan: mac acl policy registered
ath_rate_sample: 1.2 (svn r580)
ath_rate_minstrel: Minstrel automatic rate control algorithm 1.2 (svn r580)
ath_rate_minstrel: look around rate set to 10%
ath_rate_minstrel: EWMA rolloff level set to 75%
ath_rate_minstrel: max segment size in the mrr set to 6000 us
CN: Idle Module registered
CN: Policy Module registered
CN: Polling Queue registered
insmod: ath_ahb.ko: module not found
load ATH 802.11n Driver
ath_mimo_hal: 0.9.17.1 (AR5416, REGOPS_FUNC)
ath_mimo_pci: 0.9.4.5 (Atheros/multi-bss)
ath_mimo_pci: CR-LSDK-1.4.0.144
ath_dfs: Version 2.0.0
Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
wlan: 0.8.4.2 (Atheros/multi-bss)
wlan: mac acl policy registered
ath_rate_atheros: Version 2.0.1
Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved
PCI: Enabling device 0000:00:0c.0 (0000 -> 0002)
device id 29
ar5416CheckEepromDef: Read Magic = 0xA55A
need_swap = True.
dfs_init_radar_filters: dfs->dfs_rinfo.rn_numradars: 0
Oops: Exception in kernel mode, sig: 11 [#1]
RB800
Modules linked in: ath_mimo_pci ath_mimo_hal(P) ath_pci ath_hal(P) tulip via_rhine
NIP: d1ad86e0 LR: d1ad8830 CTR: c0059c5c
REGS: cf8ebb90 TRAP: 0700 Tainted: P (2.6.23.17)
MSR: 00029000 <EE,ME> CR: 24004044 XER: 00000000
TASK = cffa4dc0[694] 'insmod' THREAD: cf8ea000
GPR00: 00000001 cf8ebc40 cffa4dc0 cfd4d000 cfd4d80c 00000000 cf44a1fc 00000016
GPR08: cf404bc0 cfffa120 cfffa120 d1a0bff0 28004082 ffff4670 0000000b 00000021
GPR16: d1a725b4 cff6fba0 d1a6d164 d1b00000 d1b00000 00000011 00000012 00000018
GPR24: cfb183a0 d1a0bc7c 00000374 d1a0bff0 00000000 00000000 00000000 cf408000
NIP [d1ad86e0] dfs_init_radar_filters+0x3d4/0x548 [ath_mimo_pci]
LR [d1ad8830] dfs_init_radar_filters+0x524/0x548 [ath_mimo_pci]
Call Trace:
[cf8ebc40] [d1ad8830] dfs_init_radar_filters+0x524/0x548 [ath_mimo_pci] (unreliable)
[cf8ebc90] [d1adaba0] dfs_attach+0x3f0/0x410 [ath_mimo_pci]
[cf8ebcc0] [d1a98e00] ath_attach+0x844/0x1a18 [ath_mimo_pci]
[cf8ebd40] [d1aa5804] ath_pci_probe+0x304/0x5b0 [ath_mimo_pci]
[cf8ebd90] [c00f4564] pci_device_probe+0x84/0xa4
[cf8ebdb0] [c0111750] driver_probe_device+0x9c/0x1d0
[cf8ebdd0] [c0111a5c] __driver_attach+0xcc/0xf8
[cf8ebdf0] [c0110930] bus_for_each_dev+0x58/0x94
[cf8ebe20] [c011157c] driver_attach+0x24/0x34
[cf8ebe30] [c0110d84] bus_add_driver+0x98/0x1d0
[cf8ebe50] [c0111cdc] driver_register+0x58/0xa0
[cf8ebe60] [c00f439c] __pci_register_driver+0x54/0xa0
[cf8ebe80] [d100c074] init_ath_pci+0x74/0xb4 [ath_mimo_pci]
[cf8ebea0] [c003df38] sys_init_module+0x160/0x1338
[cf8ebf40] [c000c684] ret_from_syscall+0x0/0x3c
Instruction dump:
419e0170 80010010 2f800000 409d0098 807f1bf0 3b800000 3ba00000 3bc00000
81610014 7c83ea14 7d6bf214 3884080c <7cabc4aa> 7ca4c5aa 3b9c0001 811f1bf0
insmod: ath_mimo_ahb.ko: module not found
sorry, your unit does not support resetbutton feature

br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
device br0 entered promiscuous mode
killall: ead: nogfar: open eth1
process killed
gfar: open eth1
gfar: open eth1
device eth1 entered promiscuous mode
sh: ead: not found
killall: roamingbr0: port 1(eth1) entering learning state
_daemon: no procdevice br0 left promiscuous mode
ess killed
device br0 entered promiscuous mode
device br0 left promiscuous mode
device br0 entered promiscuous mode
ifconfig: ioctl 0x8914 failed: Cannot assign requested address
zebra disabled.
cp: cannot stat '/tmp/mycron.d/*': No such file or directory
rmmod: n_hdlc: No such file or directory
Will output 1024 bit rsa secret key to '/tmp/root/.ssh/ssh_host_rsa_key'
Generating key, this may take a while...
device eth0 entered promiscuous mode
gfar: open eth0
device eth0 left promiscuous mode
cp: cannot stat '/jffs/mycron.d/*': No such file or directory
cp: cannot stat '/mmc/mycron.d/*': No such file or directory
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
nvram was changed, needs commit, waiting 10 sec.
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
etherip: Ethernet over IPv4 tunneling driver
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
The Milkfish Router Services
ERROR: Necessary service setting not found: milkfish_username - aborting.
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
rmmod: ipt_webstr: No such file or directory
rmmod: ipt_layer7: No such file or directory
br0: port 1(eth1) entering disabled state
killall: proxywatchdog.sh: no process killed
rmmod: ipt_ipp2p: No such file or directory
The Milkfish Router Services
Restoring SIP ddsubscriber database from NVRAM...
rmmod: ip_nat_pptp: No such file or directory
rmmod: ip_nat_proto_gre: No such file or directory
Empty.
The Milkfish Router Services
Restoring SIP ddaliases database from NVRAM...
Empty.
rmmod: ip_conntrack_pptp: No such file or directory
rmmod: ip_conntrack_proto_gre: No such file or directory
insmod: ip_conntrack_proto_gre.ko: module not found
insmod: ip_nat_proto_gre.ko: module not found
umount: can't umount /tmp/smbshare: No such file or directory
rmmod: cifs: No such file or directory
killall: schedulerb.sh: no process killed
insmod: ip_conntrack_pptp.ko: module not found
insmod: ip_nat_pptp.ko: module not found
killall: wdswatchdog.sh: no process killed
rmmod: ebt_dnat: No such file or directory
rmmod: ebt_snat: No such file or directory
rmmod: ebt_mark_m: No such file or directory
rmmod: ebt_mark: No such file or directory
rmmod: ebtable_filter: No such file or directory
rmmod: ebtable_nat: No such file or directory
rmmod: ebtables: No such file or directory
rmmod: imq: No such file or directory
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAAAgwC1HJaBvLuPaNpshjZFi6/FvBaBAuiOqGvvn5uGhntShaw4DVyKIDOZjI5WsBLC1b2jjjDxslbfBnL3NxyVRPA5MEEl19SELKavqGlvYmcggNm+n+4HM/LXKXHJcmpBTjYacSv5MUJfnGw/PiEUydjDsuib657fmIfIPc2fQtmZkzeb root@DD-WRT
Fingerprint: md5 f3:2c:03:be:c2:9f:30:d0:0a:7c:90:83:ee:61:33:81
Key is a RSA key
Wrote key to '/tmp/tmp_host_key'
Key is a RSA key
Wrote key to '/tmp/root/.ssh/ssh_host_rsa_key'
Will output 1024 bit dss secret key to '/tmp/root/.ssh/ssh_host_dss_key'
Generating key, this may take a while...
PHY: e0024520:02 - Link is Up - 1000/Full
br0: port 1(eth1) entering learning state
br0: topology change detected, propagating
br0: port 1(eth1) entering forwarding state
Public key portion is:
ssh-dss AAAAB3NzaC1kc3MAAACBALEST2yBRxySZImwPB1ga52JEx+cyxxbNThFDMVt7QFfcommit
k4iJW8FXx+1LydWXpKWvewY5+NJYeOpxnvram_commit: 4096 bytes written
94D5XixhVDT3mq7josYmgzXs/aCSBEI6n0N5FijtTwST4Os64HxcRL4anvoMJMRQlFDfg8jZ/IQIEb4HmL2mUMFFmbMzLIflAAAAFQDyQj50ELysgbvbrDKjoKStcnV/3QAAAIEAqzzKv6Wd8OqrFl/ysklZDtwZzT++jP0Df+W6LDHV/OhR/5RHBIPu2IsW5PGA6OxIsqibj2c16JRpV+Y5LavWTAOxR0rZF7DAOoIbyUUghpeDvlf14ztpxghyCGubD8qmBqfJUat9s3moMg77YjIfNCwrCSKTi3lIlRtCAww/oW8AAACBAJjoqTV0RMLEORFABGa4VYU0JAjKTFOdebQcdGeBq219H5V/MX4OPANSsDT7IHpVUwEQtKo4S1JquwxDYmJfiCv2gFXVxZNrYG5ZSuVgIELF49ZrctWbgLZt466bMwNS/fal50ZpE33eKvmA/8dKwfM8Y9iMIxTsgsFEs1d10L7p root@DD-WRT
Fingerprint: md5 83:97:a9:95:17:b1:24:46:a3:10:47:7b:74:21:b0:cb
Key is a DSS key
Wrote key to '/tmp/tmp_host_key'
Key is a DSS key
Wrote key to '/tmp/root/.ssh/ssh_host_dss_key'
PHY: e0024520:01 - Link is Up - 1000/Full
commit
nvram_commit: 4096 bytes written

DD-WRT v24-sp2 std (c) 2009 NewMedia-NET GmbH
Release: 04/14/10 (SVN revision: 14265)
ÿ
DD-WRT login:

[methodman]

[dmsg

Jan 1 00:03:24 login[1285]: root login on 'console'


BusyBox v1.13.4 (2010-04-14 12:55:19 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

root@DD-WRT:~# dmesg
Command line is: console=ttyS0,115200 root=/dev/sda2 board=mpc8343 boot=1 noinitrd
Using RB800 machine description
Memory CAM mapping: CAM0=256Mb, CAM1=0Mb, CAM2=0Mb residual: 0Mb
Linux version 2.6.23.17 (root@dd-wrt) (gcc version 4.1.2) #894 Wed Apr 14 12:53:32 CEST 2010
Found legacy serial port 0 for /soc8544@e0000000/serial@4500
mem=e0004500, taddr=e0004500, irq=0, clk=399996000, speed=0
console [udbg0] enabled
Entering add_active_range(0, 0, 65536) 0 entries of 256 used
Found FSL PCI host bridge at 0x00000000e0008000.Firmware bus number: 0->255
Found FSL PCI host bridge at 0x00000000e0009000.Firmware bus number: 0->255
Found FSL PCI host bridge at 0x00000000e000a000.Firmware bus number: 0->255
Found FSL PCI host bridge at 0x00000000e000b000.Firmware bus number: 1->255
Found FSL PCI host bridge at 0x00000000e0009000.Firmware bus number: 0->255
Found FSL PCI host bridge at 0x00000000e000a000.Firmware bus number: 0->255
Found FSL PCI host bridge at 0x00000000e000b000.Firmware bus number: 1->255
Top of RAM: 0x10000000, Total RAM: 0x10000000
Memory hole size: 0MB
Zone PFN ranges:
DMA 0 -> 61440
Normal 61440 -> 65536
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 65536
On node 0 totalpages: 65536
DMA zone: 480 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 60960 pages, LIFO batch:15
Normal zone: 32 pages used for memmap
Normal zone: 4064 pages, LIFO batch:0
Movable zone: 0 pages used for memmap
Built 1 zonelists in Zone order. Total pages: 65024
Kernel command line: console=ttyS0,115200 root=/dev/sda2 board=mpc8343 boot=1 noinitrd
mpic: Setting up MPIC " OpenPIC " version 1.2 at e0040000, max 1 CPUs
mpic: ISU size: 4, shift: 2, mask: 3
mpic: Initializing for 84 sources
PID hash table entries: 1024 (order: 10, 4096 bytes)
time_init: decrementer frequency = 49.999500 MHz
time_init: processor frequency = 799.992000 MHz
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256244k/262144k available (2876k kernel code, 5748k reserved, 140k data, 280k bss, 132k init)
Calibrating delay loop... 99.94 BogoMIPS (lpj=499712)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
rstcr compatible register does not exist!
PCI: Probing PCI hardware
PCI: 0001:01:00.0: class b20 doesn't match header type 01. Ignoring class.
PCI: Transparent bridge - 0001:01:00.0
PCI: 0002:03:00.0: class b20 doesn't match header type 01. Ignoring class.
PCI: Transparent bridge - 0002:03:00.0
PCI: 0003:05:00.0: class b20 doesn't match header type 01. Ignoring class.
PCI: Transparent bridge - 0003:05:00.0
PCI: 0004:07:00.0: class b20 doesn't match header type 01. Ignoring class.
PCI: Transparent bridge - 0004:07:00.0
PCI: 0005:09:00.0: class b20 doesn't match header type 01. Ignoring class.
PCI: Transparent bridge - 0005:09:00.0
PCI: 0006:0b:00.0: class b20 doesn't match header type 01. Ignoring class.
PCI: Transparent bridge - 0006:0b:00.0
PCI: Cannot allocate resource region 2 of device 0003:06:00.0
PCI: Cannot allocate resource region 0 of device 0006:0c:00.0
PCI: Cannot allocate resource region 2 of device 0006:0c:00.0
PCI: Cannot allocate resource region 0 of device 0000:00:0c.0
PCI: Error while updating region 0003:06:00.0/2 (00001001 != ffffffff)
PCI: Failed to allocate mem resource #0:40000@aa000000 for 0006:0c:00.0
Generic PHY: Registered new driver
SCSI subsystem initialized
libata version 2.21 loaded.
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
yaffs Apr 14 2010 12:42:33 Installing.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
serial8250.0: ttyS0 at MMIO 0xe0004500 (irq = 42) is a 16550A
console handover: boot [udbg0] -> real [ttyS0]
Gianfar MII Bus: probed
eth0: Gianfar Ethernet Controller Version 1.2, 00:0c:42:72:ec:05
eth0: Running with NAPI disabled
eth0: 64/64 RX/TX BD ring size
eth1: Gianfar Ethernet Controller Version 1.2, 00:0c:42:72:ec:06
eth1: Running with NAPI disabled
eth1: 64/64 RX/TX BD ring size
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
MPPE/MPPC encryption/compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V1.0
IMQ starting with 2 devices...
IMQ driver loaded successfully.
Hooking IMQ before NAT on PREROUTING.
Hooking IMQ after NAT on POSTROUTING.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
RB_PPC CF
CF: using Local-Bus clock 99999 kHz 10000 ps
CF: irq level 1
scsi0 : pata_rb_ppc
ata1: PATA max PIO6 cmd 0x40000000 ctl 0x4000000e bmdma 0x00000000 irq 19
ata1.00: CFA: SanDisk SDCFB-1024, HDX 3.15, max MWDMA2
ata1.00: 2001888 sectors, multi 0: LBA
CF PIO mode changed to 4
ata1.00: configured for PIO4
scsi 0:0:0:0: Direct-Access ATA SanDisk SDCFB-10 HDX PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 2001888 512-byte hardware sectors (1025 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 2001888 512-byte hardware sectors (1025 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
/dev/scsi/host0/bus0/target0/lun0: p1 p2
sd 0:0:0:0: [sda] Attached SCSI removable disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
u32 classifier
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
ctnetlink v0.93: registering with nfnetlink.
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
IPP2P v0.8.2 loading
ClusterIP Version 0.8 loaded successfully
TCP bic registered
TCP cubic registered
TCP westwood registered
TCP highspeed registered
TCP hybla registered
TCP htcp registered
TCP vegas registered
TCP scalable registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Welcome to PF_RING 3.2.1
(C) 2004-06 L.Deri <deri@ntop.org>
NET: Registered protocol family 27
PF_RING: bucket length 128 bytes
PF_RING: ring slots 4096
PF_RING: sample rate 1 [1=no sampling]
PF_RING: capture TX No [RX only]
PF_RING: transparent mode Yes
PF_RING initialized correctly.
PF_RING: registered /proc/net/pf_ring/
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (ext2 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 132k init
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
Linux Tulip driver version 1.1.15 (Feb 27, 2007)
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 2009-05-08 (AR5210, AR5211, AR5212, AR9160, AR9280, RF5111, RF5112, RF2413, RF5413, RF2425, XR)
ath_pci: svn r580
wlan: svn r580
wlan: mac acl policy registered
ath_rate_sample: 1.2 (svn r580)
ath_rate_minstrel: Minstrel automatic rate control algorithm 1.2 (svn r580)
ath_rate_minstrel: look around rate set to 10%
ath_rate_minstrel: EWMA rolloff level set to 75%
ath_rate_minstrel: max segment size in the mrr set to 6000 us
CN: Idle Module registered
CN: Policy Module registered
CN: Polling Queue registered
ath_mimo_hal: 0.9.17.1 (AR5416, REGOPS_FUNC)
ath_mimo_pci: 0.9.4.5 (Atheros/multi-bss)
ath_mimo_pci: CR-LSDK-1.4.0.144
ath_dfs: Version 2.0.0
Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
wlan: 0.8.4.2 (Atheros/multi-bss)
wlan: mac acl policy registered
ath_rate_atheros: Version 2.0.1
Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved
PCI: Enabling device 0000:00:0c.0 (0000 -> 0002)
device id 29
ar5416CheckEepromDef: Read Magic = 0xA55A
need_swap = True.
dfs_init_radar_filters: dfs->dfs_rinfo.rn_numradars: 0
Oops: Exception in kernel mode, sig: 11 [#1]
RB800
Modules linked in: ath_mimo_pci ath_mimo_hal(P) ath_pci ath_hal(P) tulip via_rhine
NIP: d1ad86e0 LR: d1ad8830 CTR: c0059c5c
REGS: cf8ebb90 TRAP: 0700 Tainted: P (2.6.23.17)
MSR: 00029000 <EE,ME> CR: 24004044 XER: 00000000
TASK = cffa4dc0[694] 'insmod' THREAD: cf8ea000
GPR00: 00000001 cf8ebc40 cffa4dc0 cfd4d000 cfd4d80c 00000000 cf44a1fc 00000016
GPR08: cf404bc0 cfffa120 cfffa120 d1a0bff0 28004082 ffff4670 0000000b 00000021
GPR16: d1a725b4 cff6fba0 d1a6d164 d1b00000 d1b00000 00000011 00000012 00000018
GPR24: cfb183a0 d1a0bc7c 00000374 d1a0bff0 00000000 00000000 00000000 cf408000
NIP [d1ad86e0] dfs_init_radar_filters+0x3d4/0x548 [ath_mimo_pci]
LR [d1ad8830] dfs_init_radar_filters+0x524/0x548 [ath_mimo_pci]
Call Trace:
[cf8ebc40] [d1ad8830] dfs_init_radar_filters+0x524/0x548 [ath_mimo_pci] (unreliable)
[cf8ebc90] [d1adaba0] dfs_attach+0x3f0/0x410 [ath_mimo_pci]
[cf8ebcc0] [d1a98e00] ath_attach+0x844/0x1a18 [ath_mimo_pci]
[cf8ebd40] [d1aa5804] ath_pci_probe+0x304/0x5b0 [ath_mimo_pci]
[cf8ebd90] [c00f4564] pci_device_probe+0x84/0xa4
[cf8ebdb0] [c0111750] driver_probe_device+0x9c/0x1d0
[cf8ebdd0] [c0111a5c] __driver_attach+0xcc/0xf8
[cf8ebdf0] [c0110930] bus_for_each_dev+0x58/0x94
[cf8ebe20] [c011157c] driver_attach+0x24/0x34
[cf8ebe30] [c0110d84] bus_add_driver+0x98/0x1d0
[cf8ebe50] [c0111cdc] driver_register+0x58/0xa0
[cf8ebe60] [c00f439c] __pci_register_driver+0x54/0xa0
[cf8ebe80] [d100c074] init_ath_pci+0x74/0xb4 [ath_mimo_pci]
[cf8ebea0] [c003df38] sys_init_module+0x160/0x1338
[cf8ebf40] [c000c684] ret_from_syscall+0x0/0x3c
Instruction dump:
419e0170 80010010 2f800000 409d0098 807f1bf0 3b800000 3ba00000 3bc00000
81610014 7c83ea14 7d6bf214 3884080c <7cabc4aa> 7ca4c5aa 3b9c0001 811f1bf0
br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
device br0 entered promiscuous mode
gfar: open eth1
gfar: open eth1
gfar: open eth1
device eth1 entered promiscuous mode
br0: port 1(eth1) entering learning state
device br0 left promiscuous mode
device br0 entered promiscuous mode
device br0 left promiscuous mode
device br0 entered promiscuous mode
device eth0 entered promiscuous mode
gfar: open eth0
device eth0 left promiscuous mode
etherip: Ethernet over IPv4 tunneling driver
br0: port 1(eth1) entering disabled state
PHY: e0024520:02 - Link is Up - 1000/Full
br0: port 1(eth1) entering learning state
br0: topology change detected, propagating
br0: port 1(eth1) entering forwarding state
commit
nvram_commit: 4096 bytes written
PHY: e0024520:01 - Link is Up - 1000/Full
commit
nvram_commit: 4096 bytes written