Make sure you enable USB Printer support under Services>USB
I plugged in my printer and connected to the router using telnet through cmd with the command line "telnet 192.168.1.1" Windows 7 requires you to enable telnet under Programs and Features.
When asked for login name, make sure you use "root" and then enter your login password when prompt.
Afterwards I checked to see if my printer was detected. I got lucky since it is detected by default so I didn't have to install any printer driver.
ftp://ftp.dd-wrt.com/others/eko/V24-K26/svn15337-r2/
first if you look at that link it shows "svn15337-r2" not "svn15337"
second in that dir i see a "ftp://ftp.dd-wrt.com/others/eko/V24-K26/svn15337-r2/dd-wrt.v24-15337_NEWD-2_K2.6_mini_f7d3302.bin" which has my routers name on it and its the only file there that has my routers name on it
in the wiki link up above it dont say anything about flashing a mini first???
some assistance on this would be great
Posted: Tue Nov 15, 2011 2:26 Post subject: F7D7302
I just read through the entire thread. Thanks everyone for your contributions, especially Eko.
I'm a total noob to this dd-wrt stuff, and have been researching for weeks.
Like tdbone, I'm also interested in flashing a 7302, which I understand is the same as the 3302. I would greatly appreciate it if someone could link to or post a step by step with the latest files to use.
But can anyone comment on how well the range and speed is of the 7302/3302 when running dd-wrt builds, either mini/big/mega?
well i just wanted to add that i ordered the F7D8301 which is also known as the F7D4301 and i also ordered another F7D3302 for a total of (two) F7D3302
i live in a trailer
middle room F7D4301/8301
front room F7D3302
back room F7D3302
so i think two F7D3302`s are just going to be wireless repeaters or should they be WDS?
what i got all 3 for is my cell phones i use over WIFI with SKYPE
say i am in the front of my trailer then the phone should connect to the front F7D3302
as i walk toward the back of the trailer the phone should SWITCH to the middle router F7D4301
and as i keep continuing to walk to the back the phone should switch to the back F7D3302
i need the routers to be configured in a WDS correct?
could someone tell me what firmware is the best for this?
thanks
this post is something that might be really important
it talks about re-association time.
can someone that knows more info tell me about this?
thanks again
what is the BEST firmware for running a WDS with all the (3) routers? the F7D4301 will be master of course
note: the 5ghz radio will not be necessary i will not need 40mhz width either.
just would like N 2.4ghz 20mhz width
i need the wds to be stable though and lan working too
thanks
one more question reguarding trailed builds and the F7D3302
can i take an older trailed build from like 16777 and then load the mega buld from 17084?
i mean why dont we just have one trailed build and we can then use that to load any bin file?
can i take an older trailed build from like 16777 and then load the mega buld from 17084?
i mean why dont we just have one trailed build and we can then use that to load any bin file?
thanks
You don't need to load any bin file after a trailed build, load the trailed build of the version you want to run and you are done.
If there is no trailed build for the version you want to run then use an older trailed build after which you upgrade with the bin file for the version you want to run. _________________ Kernel panic: Aiee, killing interrupt handler!
Bump
Can anyone comment on which newer build runs better on this Belkin? Thanks.
Apparently not, so you will have to try them if you wish to find out. Newer builds have been flakey thus far, so it might be "none of the above". None should brick your router if you install properly. _________________ SIG:
I'm trying to teach you to fish, not give you a fish. If you just want a fish, wait for a fisherman who hands them out. I'm more of a fishing instructor.
LOM: "If you show that you have not bothered to read the forum announcements or to follow the advices in them then the level of help available for you will drop substantially, also known as Murrkf's law.."
