Unrecognized Ethernet-Card Listings (PCI/PCIe/Onboard)

Post new topic   Reply to topic    DD-WRT Forum Index -> X86 based Hardware
Goto page Previous  1, 2, 3, 4, 5, 6 ... 9, 10, 11  Next
Author Message
juanantofb
DD-WRT Novice


Joined: 15 Aug 2008
Posts: 13

PostPosted: Wed Dec 31, 2008 14:46    Post subject: Reply with quote
hi

i have same card and not work

bye
Sponsor
Punkbuster
DD-WRT Novice


Joined: 16 Dec 2008
Posts: 23

PostPosted: Tue Jan 06, 2009 22:04    Post subject: Reply with quote
Hi BS,
Happy New Year!

I know you are not that happy about Mikrotik, but can you please add this NIC for me:

RouterBOARD44GV

Link is:

http://www.mikrotik-store.eu/product_info.php/info/p15_RouterBOARD44GV-PCI-4-port-Gigabit-Ethernet-adapter--VIA-chips-.html

Chipset is: VIA VT6122

The think, why I need this card is, that I need several Internal Interfaces... Think this card would be able to seperate Networks.

If it is possible to implement this card, I happy looking forward to buy this one!

But if it´s not possible, do you know any relatively cheap performance 4 port nic´s which are supported?

Thanks
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7463
Location: Dresden, Germany

PostPosted: Tue Jan 06, 2009 22:21    Post subject: Reply with quote
i need the lspci output to add the detection to the x86 code. the standard VT6122 is already supported
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Punkbuster
DD-WRT Novice


Joined: 16 Dec 2008
Posts: 23

PostPosted: Tue Jan 06, 2009 23:29    Post subject: Reply with quote
Ok thank you. I will buy this card and post the lsmod data. I hope, that I will have internet access after implement the new card.

Is there a Way to configure more than one Ethernet Port in the WebGUI?
kit
DD-WRT Novice


Joined: 24 Dec 2008
Posts: 6

PostPosted: Fri Jan 09, 2009 8:22    Post subject: Reply with quote
Hi BS,

Any chance of adding the Linksys EG1032 V.3 card up?

Here's the lspci :

03:01.0 Ethernet controller: Linksys Gigabit Network Adapter (rev 10)
Subsystem: Linksys EG1032 v3 Instant Gigabit Network Adapter
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 10
I/O ports at de00 [size=256]
Memory at fdaff000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at fd900000 [disabled] [size=128K]
Capabilities: [dc] Power Managenement version 2

03:02.0 Ethernet controller: Linksys Gigabit Network Adapter (rev 10)
Subsystem: Linksys EG1032 v3 Instant Gigabit Network Adapter
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 5
I/O ports at dc00 [size=256]
Memory at fdafe000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at fd920000 [disabled] [size=128K]
Capabilities: [dc] Power Managenement version 2

More info on the chipset used by this NIC:

LINKSYS EG1032 V.3
RTL8169S-32
82506S1

Thank you very much!
nippit
DD-WRT Novice


Joined: 05 Dec 2006
Posts: 30
Location: earth

PostPosted: Sat Jan 31, 2009 16:45    Post subject: Linksys EG1032 V.3 -- -- RTL8169S-32 Reply with quote
Hi I have the same cards as KIT and it does not get detected.

Any chance these will be added. if so when?

thanks
nippit
DD-WRT Novice


Joined: 05 Dec 2006
Posts: 30
Location: earth

PostPosted: Sat Jan 31, 2009 16:49    Post subject: X86 supportted chips Reply with quote
Is there a list of chips (LAN) that are supported with the X86 version.

I am trying to use a celeron board to run as router. Way too powerfull I know...

I would like to know supported Gb chips so i can go and buy the correct card?

marwel realtek (intel seems to be too difficult to find..)

THX
nippit
DD-WRT Novice


Joined: 05 Dec 2006
Posts: 30
Location: earth

PostPosted: Wed Feb 04, 2009 14:14    Post subject: Reply with quote
any updates??
gross2
DD-WRT Novice


Joined: 21 Apr 2009
Posts: 3

PostPosted: Tue Apr 21, 2009 20:04    Post subject: Reply with quote
Hi BS,
any chance adding this one to the autodetect scripts?
X1034A SUN Quad FastEthernet PCI Card 64-Bit

sunhme module works fine (manually loaded), but won't load at startup.

lspci:
04:00.0 PCI bridge: Digital Equipment Corporation DECchip 21153 (rev 04) (prog-i
f 00 [Normal decode])
Flags: bus master, fast Back2Back, medium devsel, latency 32
Bus: primary=04, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: 88000000-8e0fffff
Prefetchable memory behind bridge: 000000008f000000-0000000096f00000
Capabilities: [dc] Power Management version 1

05:00.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01)
Flags: bus master, medium devsel, latency 32
Memory at 8b000000 (32-bit, non-prefetchable) [size=16M]
Memory at 8d800000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at 8f000000 [disabled] [size=16M]

05:00.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal 10/100 Ethernet [hme] (rev 01)
Flags: bus master, medium devsel, latency 32, IRQ 9
Memory at 8e018000 (32-bit, non-prefetchable) [size=32K]
Expansion ROM at 90000000 [disabled] [size=16M]

05:01.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01)
Flags: bus master, medium devsel, latency 32
Memory at 8a000000 (32-bit, non-prefetchable) [size=16M]
Memory at 8d000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at 91000000 [disabled] [size=16M]

05:01.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal 10/100 Ethernet [hme] (rev 01)
Flags: bus master, medium devsel, latency 32, IRQ 9
Memory at 8e010000 (32-bit, non-prefetchable) [size=32K]
Expansion ROM at 92000000 [disabled] [size=16M]

05:02.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01)
Flags: bus master, medium devsel, latency 32
Memory at 89000000 (32-bit, non-prefetchable) [size=16M]
Memory at 8c800000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at 93000000 [disabled] [size=16M]

05:02.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal 10/100 Ethernet [hme] (rev 01)
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at 8e008000 (32-bit, non-prefetchable) [size=32K]
Expansion ROM at 94000000 [disabled] [size=16M]

05:03.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01)
Flags: bus master, medium devsel, latency 32
Memory at 88000000 (32-bit, non-prefetchable) [size=16M]
Memory at 8c000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at 95000000 [disabled] [size=16M]

05:03.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal 10/100 Ethernet [hme] (rev 01)
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at 8e000000 (32-bit, non-prefetchable) [size=32K]
Expansion ROM at 96000000 [disabled] [size=16M]

THX
gross2
DD-WRT Novice


Joined: 21 Apr 2009
Posts: 3

PostPosted: Tue Apr 21, 2009 20:52    Post subject: Reply with quote
Got another one.

The onboard NIC of Intel Little Falls2 (D945GCLF2) Mini-ITX board.
Same "issue". No autodetect, but "r8169" works once loaded...

lspci:
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI E
xpress Gigabit Ethernet controller (rev 02)
Subsystem: Intel Corporation: Unknown device 0001
Flags: bus master, fast devsel, latency 0, IRQ 11
I/O ports at 1000 [size=256]
Memory at 8e200000 (64-bit, non-prefetchable) [size=4K]
Memory at 8e100000 (64-bit, prefetchable) [size=64K]
Expansion ROM at 8e120000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [70] #10 [0201]
Capabilities: [b0] #11 [0001]
Capabilities: [d0] Vital Product Data

THX
olmari
DD-WRT Guru


Joined: 24 Oct 2006
Posts: 1447
Location: Finland

PostPosted: Mon May 04, 2009 11:06    Post subject: Reply with quote
I have second mini-itx board which is pretty much the same as above one (BLKD945GCLF2D).

Again, no autodetection, but insmod'ing r8169 manually makes it work.

lspci:
Code:
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
Subsystem: Intel Corporation: Unknown device 0001
Flags: bus master, fast devsel, latency 0, IRQ 11
I/O ports at 2000 [size=256]
Memory at 48200000 (64-bit, non-prefetchable) [size=4K]
Memory at 48000000 (64-bit, prefetchable) [size=64K]
Expansion ROM at 48020000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [70] #10 [0201]
Capabilities: [b0] #11 [0001]
Capabilities: [d0] Vital Product Data


Please someone add autodetection for this "card" into DD-WRT Smile
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7463
Location: Dresden, Germany

PostPosted: Fri May 08, 2009 13:59    Post subject: Reply with quote
added these chipsets now. (please send me a notice with email if something is new here)
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
dicksons
DD-WRT Guru


Joined: 07 Jun 2006
Posts: 980
Location: Coal Creek Canyon, Colorado

PostPosted: Sun May 10, 2009 17:16    Post subject: Reply with quote
BS -- I did mail this to you but wanted to stick it here also.


Valemount KXS30SG


00:0e.0 Ethernet controller: Atheros Communications Inc. AR5212/AR5213 Multiprotocol MAC/baseband processor (rev 01)
Subsystem: Atheros Communications Inc. TRENDnet TEW-443PI Wireless PCI Adapter
Flags: bus master, medium devsel, latency 96, IRQ 11
Memory at e0040000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [44] Power Management version 2

_________________
linksys GSv2, Gv4, Gv2, GLv1, G-TM, Buffalo wbr2, whr, whr-hp, whr-g125, wli-tx4-g54hp, Moto wr850gp, Alix.3C2
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7463
Location: Dresden, Germany

PostPosted: Sun May 10, 2009 17:38    Post subject: Reply with quote
this is a atheros wireless card. this is already supported by the registered version
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
chris0815
DD-WRT Novice


Joined: 03 Oct 2009
Posts: 1

PostPosted: Sat Oct 03, 2009 9:40    Post subject: Reply with quote
Hello,

I have a Network Card
Adaptec ANA620xx/ANA69011A (rev 03)
is it possible to get this card working with dd-wrt?

That would be nice, cause its a dualnic-Card an my PC has only one PCI-Slot.
Goto page Previous  1, 2, 3, 4, 5, 6 ... 9, 10, 11  Next Display posts from previous:    Page 5 of 11
Post new topic   Reply to topic    DD-WRT Forum Index -> X86 based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum