Posted: Thu Dec 23, 2010 12:16 Post subject: E2000 led
I have just plunged into puting on your firmware using
dd-wrt.v24-14929_NEWD-2_K2.6_big-e2k-e3k.bin
but the wirless signal light is Dim
what is the lates stable release that would fix this
Regards Dale
Picked up E3000 on black friday to replace my trusty old wrt54g. Out of the box did a 30/30/30 reset, flashed 15508. Disabled 5ghz radio, 2.4 radio on G/N mixed. G band is flawless, never any issues. N band stops working every day or every few days. Sometimes SSID stops broadcasting altogether, sometimes it broadcasts but won't assign ip's. Updated to 15943 big build, issues persists. I have 3 N devices, xbox, new dell xps laptop and android phone. The only way to get them to reliably connect is to reboot router daily.
I haven't used stock firmware at all, does anyone know if this issue is present on stock builds?
Joined: 06 Feb 2010 Posts: 7401 Location: Little Rock
Posted: Sat Dec 25, 2010 17:57 Post subject:
So long as you have not done anything to fubar the CFE, you can debrick it with a serial connection fairly easy. Guides are in the wiki for 'serial recovery' and i posted the pinouts in this thread.
If i use the board pinouts and not the serial in wan, i always just use small alligator clips wired to a ca-42 cable, then clip those onto the proper pads and debug using that method. Seems to have worked for me so far. _________________ Wireless N Config | Linking Routers | DD-WRT Wiki | DD-WRT Builds | Peacock - Broadcom FAQ
Hi guys wonder if anyone can help me upload the latest firmware for E3000 Big here for me. cos no matter how i try i cannot download from ddwrt's ftp.
i couldnt link up to download the files i need. to upgrade my E3000. anyhelp is good. thanks alot..... and many thanks.....
Joined: 13 Nov 2009 Posts: 247 Location: Morehead,Kentucky
Posted: Sun Dec 26, 2010 14:14 Post subject:
gforce_ti wrote:
Hi guys wonder if anyone can help me upload the latest firmware for E3000 Big here for me. cos no matter how i try i cannot download from ddwrt's ftp.
i couldnt link up to download the files i need. to upgrade my E3000. anyhelp is good. thanks alot..... and many thanks.....
I know they are on here somewhere/everywhere, but could someone who knows create (or consolidate) a screenshot or list for the "best settings" for WL-0 Advanced, WL-0 WDS, WL-1 Advanced, and WL-1 WDS. I am sure that this will be useful to a lot of people to have it all on one post that is not on a random page out of 60 pages. Thank you for helping out as much as you all do.
Also, if anyone is familiar with the new Broadcom InConcert chips, I am having a few problems with this and my e3000.
Short: Yesterday I bricked my E3000 with "dd-wrt.v24-15943_NEWD-2_K2.6_mega.bin" instead "e2k-e3k.bin". Tried 30/30/30 and other stuff... Finally I made MAX3232-to-RS232-to-USB adapter soldered to pads on the side of PCB. No console output ?! Got UBS oscilloscope from buddy and... 3.3V on both RX and TX pins. Unsoldered my stuff from E3000 pcb - still 3.3V on RX&TX. I'm pretty sure I didn't shortened them to either power or ground.
Can anybody suggest solution or maybe even explanation what's going on ?