Can any one recommend build for version 1.9? _________________ TP-Link TL-WR1043ND: DD-WRT v24-sp2 (08/07/10) std - build 14896
Asus RT-N16: DD-WRT build 19545 (kingmod)
Joined: 21 Dec 2011 Posts: 92 Location: São Paulo - Brazil
Posted: Sun Mar 17, 2013 19:49 Post subject: WR741ND
Sucessfully flashed one untouched TP-Link WR741ND v2.0 from stock to DD-WRT v20675. 30-30-30'ed both before and after flashing.
40Mhz don't work in "N-Only" mode. It works with "NG-Mixed", thou.
LAN Leds turn on for a while during boot, but then turn off and will remain off even with a working connection on the ports. Minor annoyance. LAN works fine, thou.
Will post again after some more testing.
EDIT: All 4 LAN leds will sometimes stay on after a boot, even with empty ports.
EDIT 2: 40Mhz in N-Only mode works just fine if I set the channel manually and choose the extension. (I´m using Channel 1, upper extension). It won't work if I set channel selection to "auto".
So I flashed DD-WRT r19519 - since that seems to be the best revision for it - to my TP-Link TL-WR741ND v4 and it was working fine, for about a day, and then the Wireless mode just stopped working, with everything that was connected to the LAN ports still working fine.
This exact same problem problem was the reason I got rid of my D-Link DI-524 and bought a TP-Link router.
Joined: 21 Dec 2011 Posts: 92 Location: São Paulo - Brazil
Posted: Wed Mar 20, 2013 17:59 Post subject: WR741ND
Well, I'm using v20675 and except for the LAN leds (minor annoyance) everything works just fine. For what I've seen, it seems that those v4 are a little more buggy than the others, but on the v4 topic people are reporting good results with v20675. Maybe you should upgrade... =D
Posted: Fri Mar 22, 2013 12:34 Post subject: 741nd - 20675 doesn't work with wpa2+aes
Hi. I've got 2 brand new 741nd (v4), and upgraded them to 20675 dd-wrt firmware. While setting them has client+ap (to repeat signal), i've realised that they can't connect neither accept connections if the wireless encription is WPA2 + AES (which is the most standard nowadays).
Anyone can tell me what firmware version for 741nd should I use, that can handle wpa2+aes ?
Posted: Sat Mar 23, 2013 21:15 Post subject: Re: 741nd - 20675 doesn't work with wpa2+aes
xexe wrote:
Hi. I've got 2 brand new 741nd (v4), and upgraded them to 20675 dd-wrt firmware. While setting them has client+ap (to repeat signal), i've realised that they can't connect neither accept connections if the wireless encription is WPA2 + AES (which is the most standard nowadays).
Anyone can tell me what firmware version for 741nd should I use, that can handle wpa2+aes ?
Thank you!
same here TL-WR741ND v4.22(flashed to 20675) working as WDS station ,channel width 20MHz and WPA2 AES encryption, cannot connect to my TL-WR941ND with same firmware (20675) set as WDS AP.....but a TL-WR 743ND v1 with same firmware and exactly same settings works like a charm.