Posted: Tue Jul 06, 2010 5:35 Post subject: i have wr841n
hi i am new here.
wondring how to install dd-wrt firmware on my router wr841n tp link i have ver 5. could not find suitable firmware anywhere.
can anyone help me?
Hello, I'm buying the version v3.0 to install DD-WRT and put in wireless client mode to receive signal from my TL-WR1043ND .. anyone had any problems with this function on this router? Thank you all!
Hello friends! Today arrived my router PT-LINK TL-WR841ND Ver3.0, I called him and working properly! OK! DD-WRT firmware downloaded from the following link:
ftp://ftp.dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/07-16-10-r14815/tplink_tl-wr841ndv3/factory-to-ddwrt.bin
I clicked to upgrade to the firmware downloaded, uploaded 100%, and tp-link page said if the page does not load altomaticamente, was to click on Refresh, especially
King 5 more minutes and not uploaded, then I refresh and now does not enter the page of the router, I tried unsuccessfully to reset 30/30/30, already try to connect the WAN port and LAN and it does not assign ip to network card, even I setting the ip to 192.168.1.10 and the router page does not enter, I will have to use the serial cable? not have any other way to fix? because the salesman placed a seal of guarantee to not open the router
Anyone know the pinout of the TX, RX and GND on this card TL-ver3.0 WR841ND as in the photo? sorry about the photo, the place is marked verlho covered with tape:
10 pins are as follows:
. . . . .
. . . . .
Pin P1 is written in bold above him, and he's square and round while the rest
As I think that new releases are uploaded approximately every 14 days I am now really looking forward to this :)
Are there any information about the stability and working features of those builds beside trial and error? _________________ HW: Buffalo WHR-HP-G54-DD
FW: DD-WRT v24-sp2 (10/10/09) std - build 13064
Just a heads up, I successfully installed BrainSlayer-V24-preSP2 (08-12-10-r14929) on my WR841ND v5.5 today using the tp-link web interface. I had absolutely no problems getting dd-wrt up and running. I was hoping to use this router as a repeater (client + VAP), but have had some trouble getting a reliable connection using the site survey.
So after much frustration, I am still unable to get this router (v5.5) to connect as a client to another AP. Has anyone had success in client mode? I think this may be a bug.
Posted: Thu Aug 19, 2010 3:09 Post subject: Tests on v 5.4
cwalk wrote:
So after much frustration, I am still unable to get this router (v5.5) to connect as a client to another AP. Has anyone had success in client mode? I think this may be a bug.
Now I'm trying to connect as client to another AP so I can use it as a repeater, at the moment I can ping the network from the router via telnet but I am not able to use the network from the PC connected via the switch, I think this can be solved by bridging the interfaces.
Works great as client i'm using 841ND as client login to my network and post this msg.
My hardware version 5.4, flashing dd-wrt fw thru console command sysupgrade -i, i'm using openwrt fw before using dd-wrt fw on this router.