BS 14473 05/25/10 is out

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2, 3  Next
Author Message
redhawk0
DD-WRT Guru


Joined: 04 Jan 2007
Posts: 11563
Location: Wherever the wind blows- North America

PostPosted: Tue May 25, 2010 12:50    Post subject: BS 14473 05/25/10 is out Reply with quote
http://www.dd-wrt.com/dd-wrtv2/down.php?path=downloads%2Fothers%2Feko%2FBrainSlayer-V24-preSP2%2F05-25-10-r14573/

Let the testing commence.

[EDIT] - actually its 14473....directory is mislabeled.

BS is going to change it after the entire build is uploaded.

redhawk

_________________
The only stupid question....is the unasked one.
Sponsor
maurer
DD-WRT User


Joined: 22 Jun 2009
Posts: 104

PostPosted: Tue May 25, 2010 13:22    Post subject: wl-500gP v1 & atheros mini-pci Reply with quote
do you have any idea if the broadcom with atheros wifi works now ?
redhawk0
DD-WRT Guru


Joined: 04 Jan 2007
Posts: 11563
Location: Wherever the wind blows- North America

PostPosted: Tue May 25, 2010 13:32    Post subject: Re: wl-500gP v1 & atheros mini-pci Reply with quote
maurer wrote:
do you have any idea if the broadcom with atheros wifi works now ?


I don't know...you tell us...that's why its a BETA TEST build.

Test it...report here.

redhawk

_________________
The only stupid question....is the unasked one.
redhawk0
DD-WRT Guru


Joined: 04 Jan 2007
Posts: 11563
Location: Wherever the wind blows- North America

PostPosted: Tue May 25, 2010 13:42    Post subject: Reply with quote
Still K26-NEWD2 Repeater problem.
http://svn.dd-wrt.com:8000/dd-wrt/ticket/1352

redhawk

_________________
The only stupid question....is the unasked one.
Dark_Shadow
DD-WRT Guru


Joined: 31 Aug 2009
Posts: 2448
Location: Third Rock from the Sun

PostPosted: Tue May 25, 2010 17:03    Post subject: Reply with quote
Dark_Shadow wrote:
* http://www.dd-wrt.com/phpBB2/viewtopic.php?p=442019#442019 Micro reboot problem still exists.

* WRT54G V8, 8.2, 7.2, WRT54G2 v1 and WRT54GS2 v1 the power led still doesn't flash when updating the firmware or rebooting.
Same as last build
_________________
Peacock Thread-FAQ -- dd-wrt Wiki

Testing Multiple Routers -- Bootloader Collection Project -- My Wiki
Dark_Shadow
DD-WRT Guru


Joined: 31 Aug 2009
Posts: 2448
Location: Third Rock from the Sun

PostPosted: Wed May 26, 2010 4:42    Post subject: Reply with quote
Fleet upgraded Very Happy , except for Previously mentioned problems, all is running well.
_________________
Peacock Thread-FAQ -- dd-wrt Wiki

Testing Multiple Routers -- Bootloader Collection Project -- My Wiki
crashfly
DD-WRT Guru


Joined: 24 Feb 2009
Posts: 2026
Location: Sol System > Earth > USA > Arkansas

PostPosted: Wed May 26, 2010 5:06    Post subject: Reply with quote
Router updated. Everything seems to work as it should. No problems with start-up scripts or anything like that. Appears to work as it should. Wireless 'almost' seems faster too. Further testing ensues. Will report more tomorrow after some time has passed.
_________________
E3000 22200M KongVPN K26
WRT600n v1.1 refirb mega 18767 BS K24 NEWD2 [not used]
WRT54G v2 16214 BS K24 [access point]

Try Dropbox for syncing files - get 2.5gb online for free by signing up.

Read! Peacock thread
*PLEASE* upgrade PAST v24SP1 or no support.
ergibson83
DD-WRT Novice


Joined: 25 Apr 2010
Posts: 9

PostPosted: Wed May 26, 2010 8:34    Post subject: Reply with quote
Updated fine. No problems on the Asus N12. Everything is fine so far.
kt_haddock
DD-WRT Guru


Joined: 25 Dec 2009
Posts: 710

PostPosted: Wed May 26, 2010 18:25    Post subject: Just fine after 15 min Reply with quote
I have updated to this build, no problem so far.
3G/UMTS is back !

_________________
[I prefer answere in whole sentence]
Macgyver
DD-WRT Guru


Joined: 26 Nov 2008
Posts: 700
Location: Toronto, Canada

PostPosted: Wed May 26, 2010 18:51    Post subject: NG Mixed not working right Reply with quote
When I select NG-Mixed mode, lower channel 1, 40MHz, nothing can connect to the router....If I select Channel 6 it works like a charm...why can't it use channel 1? This is a bug not only on WRT610Nv2, but also on WRT310N, 320N...seems to be definitely a bug with the implementation of 'NG-Mixed' and should be easy to reproduce this bug.

As for 3G/UMTS option, the ZTE668 still not working for Rogers HSPA+ network...no dice on WRT610Nv2.

_________________

Hardware that works for me:
RT-N66U MerlinWRT 3.0.0.4.374.33_beta3b
E3000 WDS Kong v21661
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1848
Location: Canada

PostPosted: Wed May 26, 2010 20:17    Post subject: Re: NG Mixed not working right Reply with quote
Macgyver wrote:
When I select NG-Mixed mode, lower channel 1, 40MHz, nothing can connect to the router....If I select Channel 6 it works like a charm...why can't it use channel 1? This is a bug not only on WRT610Nv2, but also on WRT310N, 320N...seems to be definitely a bug with the implementation of 'NG-Mixed' and should be easy to reproduce this bug.

As for 3G/UMTS option, the ZTE668 still not working for Rogers HSPA+ network...no dice on WRT610Nv2.


I just installed build 14473 mega on all the WDS routers (see signature)

On the 610n_v2 I have wl0 set to NG-Mixed, channel 1, 40Mhz width, lower with WPA2/AES. All my G & N devices connect with no problem.

_________________
Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9

Off Site 1

R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4

Off Site 2

R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531


YAMon 3.4.6 | DNSCrypt-Proxy V2
Macgyver
DD-WRT Guru


Joined: 26 Nov 2008
Posts: 700
Location: Toronto, Canada

PostPosted: Wed May 26, 2010 20:20    Post subject: Re: NG Mixed not working right Reply with quote
mac913 wrote:
Macgyver wrote:
When I select NG-Mixed mode, lower channel 1, 40MHz, nothing can connect to the router....If I select Channel 6 it works like a charm...why can't it use channel 1? This is a bug not only on WRT610Nv2, but also on WRT310N, 320N...seems to be definitely a bug with the implementation of 'NG-Mixed' and should be easy to reproduce this bug.

As for 3G/UMTS option, the ZTE668 still not working for Rogers HSPA+ network...no dice on WRT610Nv2.


I just installed build 14473 mega on all the WDS routers (see signature)

On the 610n_v2 I have wl0 set to NG-Mixed, channel 1, 40Mhz width, lower with WPA2/AES. All my G & N devices connect with no problem.


At first it was ok....after a few hours the wireless clients are unable to connect...I have not flashed my WDS 610Ns yet...saving that for last...too much to reconfigure and they have 14471 on them...but mine do the same on 14471...channel 6 no problem

_________________

Hardware that works for me:
RT-N66U MerlinWRT 3.0.0.4.374.33_beta3b
E3000 WDS Kong v21661
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1848
Location: Canada

PostPosted: Wed May 26, 2010 20:27    Post subject: Reply with quote
I finished installing build 14473 mega K2.6 on the WDS network.

I still had reboot issues with the 610n_v2; under-clocking to 400Mhz has stopped that issue.

When I use the Start-Up Command:
sleep 20
echo "16384" > /sys/module/nf_conntrack/parameters/hashsize
echo "16384" > /proc/sys/net/ipv4/netfilter/ip_conntrack_max


The GUI shows a MAX of 4096 connections, but telnet commands show that the hashsize is 16384 and ip_conntrack_max is 16384. With Build 14144 I would see the correct GUI max of 16384 connections.

_________________
Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9

Off Site 1

R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4

Off Site 2

R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531


YAMon 3.4.6 | DNSCrypt-Proxy V2
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1848
Location: Canada

PostPosted: Wed May 26, 2010 20:40    Post subject: Re: NG Mixed not working right Reply with quote
Macgyver wrote:
mac913 wrote:
Macgyver wrote:
When I select NG-Mixed mode, lower channel 1, 40MHz, nothing can connect to the router....If I select Channel 6 it works like a charm...why can't it use channel 1? This is a bug not only on WRT610Nv2, but also on WRT310N, 320N...seems to be definitely a bug with the implementation of 'NG-Mixed' and should be easy to reproduce this bug.

As for 3G/UMTS option, the ZTE668 still not working for Rogers HSPA+ network...no dice on WRT610Nv2.


I just installed build 14473 mega on all the WDS routers (see signature)

On the 610n_v2 I have wl0 set to NG-Mixed, channel 1, 40Mhz width, lower with WPA2/AES. All my G & N devices connect with no problem.


At first it was ok....after a few hours the wireless clients are unable to connect...I have not flashed

my WDS 610Ns yet...saving that for last...too much to reconfigure and they have 14471 on them...but mine do the same on 14471...channel 6 no problem


The WDS is N-5Ghz on all 320 and wl1 on the 610_v2. I'll see how the network will be after a couple of hours.

_________________
Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9

Off Site 1

R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4

Off Site 2

R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531


YAMon 3.4.6 | DNSCrypt-Proxy V2
redhawk0
DD-WRT Guru


Joined: 04 Jan 2007
Posts: 11563
Location: Wherever the wind blows- North America

PostPosted: Thu May 27, 2010 0:46    Post subject: Reply with quote
mac913 wrote:
I finished installing build 14473 mega K2.6 on the WDS network.

I still had reboot issues with the 610n_v2; under-clocking to 400Mhz has stopped that issue.

When I use the Start-Up Command:
sleep 20
echo "16384" > /sys/module/nf_conntrack/parameters/hashsize
echo "16384" > /proc/sys/net/ipv4/netfilter/ip_conntrack_max


The GUI shows a MAX of 4096 connections, but telnet commands show that the hashsize is 16384 and ip_conntrack_max is 16384. With Build 14144 I would see the correct GUI max of 16384 connections.


Are you sure the startup script is running...try running those commands from the command line and then check your nvram variables again.

http://www.dd-wrt.com/phpBB2/viewtopic.php?t=72851

redhawk

_________________
The only stupid question....is the unasked one.
Goto page 1, 2, 3  Next Display posts from previous:    Page 1 of 3
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum