kalle_karlsson DD-WRT Novice
Joined: 21 Jul 2010 Posts: 24
|
Posted: Wed Jul 21, 2010 8:29 Post subject: WRT160NL und USB HDD via Samba |
|
Hallo, als Neuling was DD-WRT und Linux angeht habe ich wahrscheinlich irgendwas verkehrt gemacht. Es will mir nicht gelingen, eine externe USB Festplatte von Windows aus anzusprechen. Ich habe die Platte mit 3 Partitionen erstellt (opt/swap/data) und Slim samba2 installiert. Die Platte wird als USB erkannt:
Quote: | --- /dev/discs/disc0/disc
Block device, size 1.365 TiB (1500301910016 bytes)
DOS/MBR partition map
Partition 1: 509.8 MiB (534610944 bytes, 1044162 sectors from 63)
Type 0x83 (Linux)
Ext3 file system
Volume name "Optware"
UUID F6C40B5C-A510-4F43-BCF4-C5AFF4B7A42D (DCE, v4)
Volume size 509.8 MiB (534609920 bytes, 522080 blocks of 1 KiB)
Partition 2: 62.75 MiB (65802240 bytes, 128520 sectors from 1044225)
Type 0x82 (Linux swap / Solaris)
Linux swap, version 2, subversion 1, 4 KiB pages, little-endian
Swap size 62.75 MiB (65794048 bytes, 16063 pages of 4 KiB)
Partition 3: 1.364 TiB (1499698851840 bytes, 2929099320 sectors from 1172745)
Type 0x83 (Linux)
Ext3 file system
Volume name "Data"
UUID 0DD51473-ABDC-412A-ABBD-5A385405DFB1 (DCE, v4)
Volume size 1.364 TiB (1499698851840 bytes, 366137415 blocks of 4 KiB)
Status: Mounted on /mnt |
und anscheinend auch richtig eingebunden:
Quote: | Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 5632 5632 0 100% /
/dev/discs/disc0/part1
505604 18915 460585 4% /mnt
/dev/discs/disc0/part1
505604 18915 460585 4% /opt
/dev/discs/disc0/part3
1441569152 202364 1368139308 0% /mnt/data |
Wenn ich jedoch darauf zugreifen möchte (\\192.168.2.1) kann ich keine Verbindung erhalten. Firewall ist abgestellt, daran sollte es nicht liegen. Hat jemand Hinweise wo der Fehler steckt?
Mfg Karlsson
Ergänzung: Beim Starten von samba2.usb erhalte ich folgendes log
Quote: | root@Routertouille:/mnt# ./samba2.usb
.
Welcome to Slim Samba2 v.5
sh: -m: unknown operand
Checking to see if /mnt is mounted
Checking to see if /mnt is mounted
Checking to see if /opt is mounted
Three partitions found, so mounting data drive /mnt/data onto partition3
mount: mounting /dev/discs/disc0/part3 on /mnt/data failed: Device or resource b usy
Copy DD-WRT IP settings to smb.conf
cp: cannot stat '.conf': No such file or directory
Start Samba
mkdir: cannot create directory '/tmp/samba': File exists
Starting smbd:
/opt/sbin/smbd: line 15: syntax error: "(" unexpected
Starting nmbd:
/opt/sbin/nmbd: line 1: syntax error: "(" unexpected
Start ProFTPd
- setting default address to 192.168.2.1
Your current workgroup name is: WORKGROUP
You may change the workgroup name with the command: samba2.cwg
Done
Before unplugging USB drive from a live router,
run command: sh /tmp/unplug.usb
|
Hilft das? Mir leider nicht.
/Karlsson |
|