RedBoot(tm) bootstrap and debug environment [ROMRAM]
Ubiquiti Networks certified release, version 0.9.00483.1103151313 - built 13:14: 44, Mar 15 2011
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
Board: Ubiquiti Ubiquiti AR2315/6/7/8 based board (Ubiquiti NanoStation2 detecte d)
Arch: ar2316
RAM: 0x80000000-0x81000000, [0x80040b80-0x80fe1000] available
Flash: 0xbfc00000-0xbfff0000, in 64 blocks of 0x00010000 bytes each
== Executing boot script in 1.000 seconds - enter ^C to abort
RedBoot> cache off
RedBoot> fis load -d -e kernel
Trying LZMA decompression...
Image loaded from 0x80041000-0x802aaab8
Image is not ELF, skipping ELF parsing...
RedBoot> go
I have only recently started playing around with this type of stuff.
If anybody requires any sort of output from this device to assist them, please let me know.
Currently I have successfully installed the Nano Station M2 original firmware in my TP Link 5210G. Can i now directly install the firmware of DD-WRT for Nano Station M2 into my TP Link 5210G which I already converted into Nano Station M2?
yes its possible but you should stay with Nanostation firmware because openwrt and ddwrt are sooo slow ! Nanostation firmware is just awesome for this router.