Notes: 1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.2 and newer 2. 'KRACK' vulnerability fixes were completed in r33678 for Broadcom, including k26 (33655) & k24 (33656); use 33772 or later.
3. Bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead as WDS doesn't work with Broadcom ARM either (see Issues below).
4. PBR/UDP with SFE working again since r40513 (see 6729)
4. CAKE scheduler added since r40547 (see 5796)
Issues, observations, and/or workarounds reported: 1.Trendnet 81*DRU models are missing factory-to-flash 2.DNScrypt is mostly only using v2 protocols now, but requires Golang that DD can't use:6246 3.WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) 4.K2.6 builds are broken since 38253(?) (GUI issues):6538 5.VAPs not working at boot; workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
This appears fixed (only for unbridged VAPs?) with r40564:40566...
Important: if reporting any issues, provide applicable info (GUI syslog, `dmesg`, `cat /var/log/messages`, etc.)
Or put into SVN ticket. For firewall issues, also provide "iptables" info (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).
Template to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
WARNING:This thread is to report on flashing this experimental test build, providing important info for both developers and users. Always state your hardware model, version, mode (e.g. Repeater) and SPECIFIC build (e.g. 33555_NEWD-2_K3.x_mega-nv64k.bin). Please avoid discussions and create a new thread to discuss specific problems or questions, as this thread is for reporting, not support. Posts may be deleted or moved to keep this thread manageable and useful. If you don't understand the risks or what to flash and how, with a means of recovery if it bricks, do NOT flash this experimental test build.
Last edited by kernel-panic69 on Fri Sep 13, 2019 20:21; edited 1 time in total
Router: Netgear R7000P
Kernel: Linux 4.4.192 #1286 SMP Fri Sep 13 05:53:36 +04 2019 armv7l
Mode: Gateway / AP / Unbound
Status: using the sfe (staying away from QoS) all seems well
Last edited by tinkeruntilitworks on Fri Sep 13, 2019 20:42; edited 1 time in total
Posted: Fri Sep 13, 2019 18:27 Post subject: EA6350 V2
Router: EA6350 V2
Firmware: Firmware Version DD-WRT v3.0-r41027 std (09/13/19)
Kernel: Linux 4.4.192 #1281 SMP Fri Sep 13 05:29:44 +04 2019 armv7l
Previous: Firmware Version DD-WRT v3.0-r39960M kongac (06/08/19)
Reset: No
Mode: Gateway
Status: Everything works so far. Although router didn't come back up after web upgrade. I had to go un-plug it and plug it back in for it to boot cleanly.
so far it's keeping my settings from kong build. _________________ WRT54GL v1.1 - Flashed
Linksys WRT54G2 v1 - Flashed
EA6350 v2 - Flashed
Router Model / Version: Cisco Linksys E4200 v1
File: dd-wrt.v24-41027_NEWD-2_K3.x_mega-e4200.bin
Firmware: DD-WRT v3.0-r41027 mega (09/13/19)
Kernel: Linux 3.10.108-d8 #26758 Fri Sep 13 10:03:04 +04 2019 mips
Previous: DD-WRT v3.0-r40932 mega (09/07/19)
Reset: No
Mode: Gateway / AP
Uptime: ~8:40
Status: OK
Issues / Errors: Decided to enable QoS. Using HFSC/FQ_CODEL_FAST. Seems to be fairly stable with minimal config.
PS: Nobody noticed my typo and called me out on it I fixed it and changed thread title since <Kong> is no longer developing and supporting DD-WRT.
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r41027 std (09/13/19)
Kernel: Linux 4.4.192 #1281 SMP Fri Sep 13 05:29:44 +04 2019 armv7l
Previous: r40932
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far (haven't tested the impact of QoS changes yet, but HFSC/FQ_CODEL continues to work well).
Kernel.Info x.x.x.x Sep 13 09:58:09 kernel: nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
Uptime: 11hr 17min
Temperatures: CPU 68.0 °C / WL0 48.0 °C / WL1 53.9 °C
kernel-panic69 wrote:
PS: Nobody noticed my typo and called me out on it ...
Darn, proofreading build posts is my favourite part of evaluating new releases.
Posted: Fri Sep 13, 2019 22:52 Post subject: WNDR4500v2
Router/Version: WNDR4500v2
File: DD-WRT v3.0-r41027 giga (09/13/19)
Kernel: Linux 3.10.108-d8 #26742 Fri Sep 13 09:50:06 +04 2019 mips
Mode: WAP/Switch mode/DHCP forwarder
Status: Working - No Reset on upgrade
Uptime: 6 min
Temps: WL0 44.5 °C / WL1 46.0 °C (heatsink mod)
Previous Version: 40932
Will update as issues arise.
.:EDIT:.
Router/Version: Asus RT-N66R
File: DD-WRT v3.0-r41027 big (09/13/19)
Kernel: Linux 3.10.108-d8 #26754 Fri Sep 13 09:59:28 +04 2019 mips
Mode: WAP/Switch mode/DHCP forwarder
Status: Working
Uptime: 1:14
Temps: WL0 52.9 °C / WL1 51.5 °C
Previous Version: 40559
Router flashed with no issue settings not reset for flash test working well. After upgrade to this version my security software started to complain about ARP poisoning attacks from the RaspberryPi running Kodi. Most likely the wifi from the Pi connected as I see two IPs associated with the Pi. Will update if not the Pi at fault.
Joined: 14 Sep 2019 Posts: 301 Location: Maine, USA
Posted: Sat Sep 14, 2019 12:56 Post subject:
Router/Version: Asus RT-N66U File: dd-wrt.v24-41027_NEWD-2_K3.x_mega_RT-N66U.trx Kernel: Linux 3.10.108-d8 #26758 Fri Sep 13 10:03:04 +04 2019 mips Mode: AP - USB Status: Working
Router/Version: Asus RT-N12D File: dd-wrt.v24-41027_NEWD-2_K3.x_mega.bin Kernel: Linux 3.10.108-d8 #26758 Fri Sep 13 10:03:04 +04 2019 mips Mode: AP Status: Working
Both flashed using GUI from r40932 without reset. Up 24 hours. Syslog clean. Both exhibited rekey issue on prior versions. Saw nothing in svn which would indicate any change with rekey issue with this version.
I fixed it and changed thread title since <Kong> is no longer developing and supporting DD-WRT.