Absolutely.. I dumped them all for ya. I purposely did not include the nvram block as this router is currently live in the wild, but if you need that too, I can get it to whomever privately.
I also included a .txt file inside the archive with some additional info in it. Not sure if you need anything else, but if you do, don't hesitate to ask
Does anyone know maybe when the date of this will be released i really despise the Netgear firmware running on this thing i love DDWRT and cant wait to run it!
The 5GHz radio in the 3400 v2 is a radio that dd-wrt hasn't got any driver for (same radio as in Cisco E3200 and E2500) so the v2 can currently not be supported.
The 5GHz radio in the 3400 v2 is a radio that dd-wrt hasn't got any driver for (same radio as in Cisco E3200 and E2500) so the v2 can currently not be supported.
I assume that I have the v1 because I can't find anything that says I have the v2 in the webgui, on the box, or on the router itself. Will there be a firmware release for the v1?
I've been lurking in this thread for a while, if you need any info I can get from the telnet prompt I'd be more than happy to provide this for the wndr3400v1
How about just the 2.4ghz radio? I know it wouldn't be complete, but as I currently don't use the 5ghz band (adapters are $$ heh) I'd most certainly make use of 2.4ghz + usb and dd
How about just the 2.4ghz radio? I know it wouldn't be complete, but as I currently don't use the 5ghz band (adapters are $$ heh) I'd most certainly make use of 2.4ghz + usb and dd
I think you can draw your own conclusions from the fact that Eko has not released any build for E3200 or E2500..
I haven't asked Eko about 3400 v2 and don't think I have to in order to say that 3400 v2 will not be supported at the moment.
Joined: 26 Jan 2008 Posts: 13049 Location: Behind The Reset Button
Posted: Mon Aug 29, 2011 13:03 Post subject:
LOM wrote:
path0s wrote:
How about just the 2.4ghz radio? I know it wouldn't be complete, but as I currently don't use the 5ghz band (adapters are $$ heh) I'd most certainly make use of 2.4ghz + usb and dd
I think you can draw your own conclusions from the fact that Eko has not released any build for E3200 or E2500..
I haven't asked Eko about 3400 v2 and don't think I have to in order to say that 3400 v2 will not be supported at the moment.
There is a build for the 3200.. As we know, the 5ghz radio does not work yet but there are no problems with the 2.4ghz radio.
I hope you are not thanking me with the intention of flashing the 3200 build on your device. I just wanted to point out that there is a working 3200 build. But the 5ghz radio is a usb device, not a pci that has been the standard up till now. Driver source is not available atm. It seems that there are several new routers using this architecture and the routers won't be ported till drivers are either built or obtained. _________________ [Moderator Deleted]
Oh, no, not flashing that fw to mine Just thanks for pointing me to at least some hope that maybe if there's time at least the 2.4ghz radio might be supported in the future. I've got 3 routers here that can't run dd yet, wndr3400v2, wnr2000v3, and trendnet 633gr. All 3 were freebies so I guess I can't complain a whole lot, but they should would be nicer with some dd love!