Again updated my E2000 (converted WRT320N) from r15501_K26_std-usb-nas to r15506_K26_std-usb-nas without problems.
This build seems to have fixed a DDNS related problem (http://svn.dd-wrt.com:8000/dd-wrt/changeset/15505 and http://svn.dd-wrt.com:8000/dd-wrt/changeset/15506) despite DDNS worked fine on my router running r15501 (it registered the correct IP despite I did not check it from outside my network). _________________ 1 x TP-Link WDR-4300 v1.1 (primary router running OpenWRT Attitude Adjustment)
1 x TP-Link WDR-3600 v1.4 (backup/testing router running latest OpenWRT bleeding edge)
WRT320n with dd-wrt.v24-15506_NEWD-2_K2.6_mini_wrt320n.bin
1°) An initial wireless N connection is only partial : good ssid, very good signal, W7 or XP say 300 mbits/s ... but no internet connection. It should be launched Internet Explorer so that all returns OK (DNS ????) Edit : I am stupid, it's my modem.
2°) Status --> Wireless give channel 4 but, W7 and inssider say 6 + 2
3°) Status --> Wireless Wi-viz Survey .... nothing !!! (good with 15501)
Good or not ?
Last edited by Squale on Tue Oct 26, 2010 21:16; edited 1 time in total
Tue Oct 26 19:14:13 2010: W: DYNDNS: Error 'RC_IP_CONNECT_FAILED' (0x13) when talking to IP server
Tue Oct 26 19:14:13 2010: W:'RC_IP_CONNECT_FAILED' (0x13) updating the IPs. (it 2)
Tue Oct 26 19:27:34 2010: W: DYNDNS: Error 'RC_IP_CONNECT_FAILED' (0x13) when talking to IP server
Tue Oct 26 19:27:34 2010: W:'RC_IP_CONNECT_FAILED' (0x13) updating the IPs. (it 3)
Tue Oct 26 19:14:13 2010: W: DYNDNS: Error 'RC_IP_CONNECT_FAILED' (0x13) when talking to IP server
Tue Oct 26 19:14:13 2010: W:'RC_IP_CONNECT_FAILED' (0x13) updating the IPs. (it 2)
Tue Oct 26 19:27:34 2010: W: DYNDNS: Error 'RC_IP_CONNECT_FAILED' (0x13) when talking to IP server
Tue Oct 26 19:27:34 2010: W:'RC_IP_CONNECT_FAILED' (0x13) updating the IPs. (it 3)
Still dyndns errors.
Use this settings on DynDns:
DDNS Tjänst: Own
DYNDNS Server: members.dyndns.org
Username: username
Password: password
URL: /nic/update?
Extra DDNS val: --ip_server_name checkip.two-dns.de /
That is working _________________ [I prefer answere in whole sentence]
Extra DDNS val: --ip_server_name checkip.dyndns.com /
works too
It may work initially, but it will eventually fail. That canonical name resolves to 3 round-robin ip addresses and 2 out of the 3 respond sporadically if at all. That is the real source of the problem.
DynDns support says they are aware of the problem with their server and are working on fixing it.
Joined: 13 Nov 2008 Posts: 5266 Location: CENTRAL Midnowhere
Posted: Thu Oct 28, 2010 4:25 Post subject:
Strangely inacative use of this build?
I put it on my 310nv1 (std_nokaid k24) and put the router into repeater mode. Seems to be working fine. _________________ Warning: I'm "out of my element!"
http://www.youtube.com/watch?v=MjYJ7zZ9BRw&NR=1
Joined: 18 Jan 2008 Posts: 269 Location: Devon, PA USA
Posted: Thu Oct 28, 2010 11:55 Post subject:
I put it on my signature units 600n V1 and 4 E2000 without any problems to report as of yet. _________________ 2 x wrt600n v1.1 AP WL0 Mixed Mode WPA2 Pers Aes, WL1 N Only Repeater Bridge WPA2 Pers AES V24 BS 15778 WT610N
wrt310n Wireless Bridge WPA2 Pers AES v24 BS 15506 Mini
wrt54g v7 G Only Repeater Bridge WPA2 Pers AES v24 BS 12523 Micro
I put it on my 310nv1 (std_nokaid k24) and put the router into repeater mode. Seems to be working fine.
I guess this is because Eko released r15508. _________________ 1 x TP-Link WDR-4300 v1.1 (primary router running OpenWRT Attitude Adjustment)
1 x TP-Link WDR-3600 v1.4 (backup/testing router running latest OpenWRT bleeding edge)
flashed to this build on E3000, looking good so far. _________________ Linksys WRT E3000 - EKO dd-wrt.v24-16403_NEWD-2_K2.6_mega-e2k-e3k
Linksys WRT 150N - BS 10-02-10-r15334 dd-wrt.v24_std_generic
Posted: Fri Oct 29, 2010 1:52 Post subject: Linksys E3000
Flashed my E3000 with std e2k-e3k and all is working well. Flashed from 15501 to eko std 15508 to monitor speeds. I rolled back to this build after determining in my environment at least Brainslayer builds continue to deliver better speeds wireless and wired. Running Port Forwarding, DDNS, WPA2 Personal AES, Dual Radios with clients on both freqs. Very fast and stable. Thanks Brainslayer.
Was working fine on build 15437. I upgraded to 15501 & then to 15506. Didn't work on either, just wanted to know if it could be something configuration wise.