China 3G router help needed to identify and flash dd-wrt

Post new topic   Reply to topic    DD-WRT Forum Index -> Ralink SoC based Hardware
Goto page Previous  1, 2, 3, 4, 5  Next
Author Message
diavolo
DD-WRT Novice


Joined: 04 Jan 2012
Posts: 8

PostPosted: Wed Jan 04, 2012 22:38    Post subject: Reply with quote
1+
I am also interested to try dd-wrt, but I cannot try without 3g support, because I am condemned to 3g as only way to have internet.
I will appreciate any help!

@rbotte
Did you managed to get 3g working?

Thanks to all willing to help!!!
Kind regards
Sponsor
frollic
DD-WRT Novice


Joined: 01 Sep 2011
Posts: 32

PostPosted: Thu Jan 12, 2012 10:46    Post subject: Reply with quote
diavolo wrote:
1+
I am also interested to try dd-wrt, but I cannot try without 3g support, because I am condemned to 3g as only way to have internet.
I will appreciate any help!

@rbotte
Did you managed to get 3g working?

Thanks to all willing to help!!!
Kind regards

check out http://www.dd-wrt.com/phpBB2/viewtopic.php?t=145299
diavolo
DD-WRT Novice


Joined: 04 Jan 2012
Posts: 8

PostPosted: Thu Jan 12, 2012 11:56    Post subject: Reply with quote
Dear Frollic,

I has read all post regarding this matter, but I think that most valuable topic for this matter:

http://www.dd-wrt.com/phpBB2/viewtopic.php?t=142890

is the topic which not more exist.
Can you help or point us where to find solution.
thanks
rbotte
DD-WRT Novice


Joined: 03 Jan 2012
Posts: 4

PostPosted: Thu Jan 12, 2012 21:51    Post subject: Reply with quote
@diavolo - No i haven't managed to get 3g working...
All i read about 3g and ddwrt its all about the mega versions of the firmware for router with 32+ ram and this one only got 32.

I've read i thread were someone says something about including the 3g module on ddwrt not-mega.. but i can't find it now.. maybe its that topic you say..

If someone could help us compile the 3g module for 32m ram modem i'm looking forward to test it!
sysmatck
DD-WRT Novice


Joined: 27 Dec 2011
Posts: 14

PostPosted: Fri Jan 13, 2012 19:47    Post subject: USB support Reply with quote
Today I tested the std version attaching an flash disk into the USB port. The device is not recognized... maybe the generic mini+usb version (http://www.dd-wrt.com/dd-wrtv2/downloads/others/eko/V24_TNG/svn17990/dd-wrt.v24-17990_NEWD_mini_usb.bin) is a half way to get 3g working...

Has anyone tried the Asus RT-N13U version?
diavolo
DD-WRT Novice


Joined: 04 Jan 2012
Posts: 8

PostPosted: Sun Jan 15, 2012 21:52    Post subject: Reply with quote
@sysmatck
I saw that you successfully flashed this router to dd-wrt, and I want to know are you try to went back and restore original Chinese firmware?
I am interested to try Asus RT-N13U image and to enable 3g, but because this router is essential to my home I want to check can I reverse him in original state.
Thanks in advance,
sysmatck
DD-WRT Novice


Joined: 27 Dec 2011
Posts: 14

PostPosted: Mon Jan 16, 2012 1:31    Post subject: Reply with quote
diavolo wrote:
@sysmatck
I saw that you successfully flashed this router to dd-wrt, and I want to know are you try to went back and restore original Chinese firmware?
I am interested to try Asus RT-N13U image and to enable 3g, but because this router is essential to my home I want to check can I reverse him in original state.
Thanks in advance,


Hello @diavolo, I'm sorry, but I can't help you! I did not flashed back the original firmware, dispite I do have an suposed original backup file (not made by me, I downloaded it).

Also, I did not made the Asus firmware test, and I prefer in this case try the generic version first...

The USB function as storage is more interesting for me; but the particular router I made the flash, I will use in my father's company, so, for those testing purposes I will need to purchase another one, and I do expect to know other ways to write the entire memory in case of brick!
diavolo
DD-WRT Novice


Joined: 04 Jan 2012
Posts: 8

PostPosted: Mon Jan 16, 2012 9:42    Post subject: Reply with quote
If you need router for USB storage, no need to wait go here and flash your router:
http://www.dd-wrt.com/phpBB2/viewtopic.php?p=633602#633602
regards, Diavolo
frollic
DD-WRT Novice


Joined: 01 Sep 2011
Posts: 32

PostPosted: Tue Jan 17, 2012 7:37    Post subject: Reply with quote
diavolo wrote:
@sysmatck
I saw that you successfully flashed this router to dd-wrt, and I want to know are you try to went back and restore original Chinese firmware?
I am interested to try Asus RT-N13U image and to enable 3g, but because this router is essential to my home I want to check can I reverse him in original state.
Thanks in advance,

I reverted my two routers to the Aceex 22/Y firmware. I simply couldn't get the dd-wrt firmware to "forward" my DHCP request to my main server where the DHCP is running.


Going back to the Aceex or the stock firmware is described here: http://www.dd-wrt.com/phpBB2/viewtopic.php?p=364724#364724
Same procedure can of course be used for any firmware ...

Might for fun also try the wive-ng-rtln firmware.
rbotte
DD-WRT Novice


Joined: 03 Jan 2012
Posts: 4

PostPosted: Mon Jan 23, 2012 19:23    Post subject: Reply with quote
Hi there,

I need the 3G suport... and since the aceex firmware or the ddwrt firmware for aceex doesn't support 3G, my only chance is the original firmware,,

Anyone has the original firmware for this router?

Best regards,
frollic
DD-WRT Novice


Joined: 01 Sep 2011
Posts: 32

PostPosted: Thu Jan 26, 2012 14:31    Post subject: Reply with quote
rbotte wrote:
Hi there,

I need the 3G suport... and since the aceex firmware or the ddwrt firmware for aceex doesn't support 3G, my only chance is the original firmware,,

Anyone has the original firmware for this router?

Best regards,

One of the posts in http://club.dealextreme.com/forums/Forums.dx/Forum.92141 points towards

http://www.sztianhao.com/en/ProductShow.asp?ID=292
frollic
DD-WRT Novice


Joined: 01 Sep 2011
Posts: 32

PostPosted: Thu Jan 26, 2012 21:28    Post subject: Reply with quote
frollic wrote:

Might for fun also try the wive-ng-rtln firmware.

wive-ng-rtln worked like a charm, looks just like the Aceex firmware, but with a bunch of extra features.

bin used was the Acorp_WR-300N-2T2R.2.0.5.RU.26012012

btw, I had a quick look in the /sbin dir of the Aceex, and there's a shell script in there called connect3G.sh or somthing like that, with a few modems listed, you might want to check it out.
diavolo
DD-WRT Novice


Joined: 04 Jan 2012
Posts: 8

PostPosted: Fri Jan 27, 2012 17:34    Post subject: Reply with quote
Dear Frollic,
Can you print or copy, paste here drivers folder of Acorp bin which you using.

Thanks in advance!
frollic
DD-WRT Novice


Joined: 01 Sep 2011
Posts: 32

PostPosted: Mon Jan 30, 2012 8:46    Post subject: Reply with quote
diavolo wrote:
Dear Frollic,
Can you print or copy, paste here drivers folder of Acorp bin which you using.

Thanks in advance!

http://sourceforge.net/projects/wive-ng/files/wive-ng-rtnl/

note, (probably) no 3G support in wive-ng-rtnl fw.
frollic
DD-WRT Novice


Joined: 01 Sep 2011
Posts: 32

PostPosted: Mon Mar 05, 2012 9:33    Post subject: Reply with quote
Now also supported by OpenWRT - https://forum.openwrt.org/viewtopic.php?pid=158105#p158105
Goto page Previous  1, 2, 3, 4, 5  Next Display posts from previous:    Page 4 of 5
Post new topic   Reply to topic    DD-WRT Forum Index -> Ralink SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum