Joined: 24 Feb 2009 Posts: 2026 Location: Sol System > Earth > USA > Arkansas
Posted: Tue Nov 23, 2010 5:06 Post subject:
Well ... I finally installed this version (15778). Everything appears normal. On the bright side, at least it works. _________________ E3000 22200M KongVPN K26
WRT600n v1.1 refirb mega 18767 BS K24 NEWD2 [not used]
WRT54G v2 16214 BS K24 [access point]
Try Dropbox for syncing files - get 2.5gb online for free by signing up.
Read! Peacock thread
*PLEASE* upgrade PAST v24SP1 or no support.
Joined: 23 Nov 2010 Posts: 28 Location: Crown Point, NY
Posted: Tue Nov 23, 2010 6:47 Post subject:
I, too, am having the same problems. I think this build the Port Forwarding became broken. Everything else seems to work fine. If I revert to an earlier version, everything as far as port forwarding gets corrected. This may be a bug in the build. It shows all the proper port forwards, but will not route to the IP as if it was turned off.
HelloAndroid wrote:
Hello
i flash 15778-big it on Asus RT-N16.
I have Problem with the Port Forwarding or somthing other is wrong. i cant login/connect over the www to some PCs.
I, too, am having the same problems. I think this build the Port Forwarding became broken. Everything else seems to work fine. If I revert to an earlier version, everything as far as port forwarding gets corrected. This may be a bug in the build. It shows all the proper port forwards, but will not route to the IP as if it was turned off.
HelloAndroid wrote:
Hello
i flash 15778-big it on Asus RT-N16.
I have Problem with the Port Forwarding or somthing other is wrong. i cant login/connect over the www to some PCs.
Iam Back to 15747 this run fine.
I'm having the same issue - none of my port forwards are working. I didn't have this issue until I updated to build 15747 and I'm still having the issue with 15778. Before build 15747 I hadn't updated in probably 5 or 6 months. I always do 30/30/30 before and (10 mins) after flashing and I always reconfigure settings manually - no scripts. I'm running a static IP and using portforward.com and grc.com to test that the ports are not forwarding. Other than that everything seems to be working fine for me.
ETA: My router is a Linksys WRT600N v1.1 and I'm running the mini build.
Joined: 23 Nov 2010 Posts: 28 Location: Crown Point, NY
Posted: Tue Nov 23, 2010 8:45 Post subject:
My router is the Linksys E3000 running the Mega build, but also tested the big build.
Enik wrote:
mastacontrola wrote:
I, too, am having the same problems. I think this build the Port Forwarding became broken. Everything else seems to work fine. If I revert to an earlier version, everything as far as port forwarding gets corrected. This may be a bug in the build. It shows all the proper port forwards, but will not route to the IP as if it was turned off.
HelloAndroid wrote:
Hello
i flash 15778-big it on Asus RT-N16.
I have Problem with the Port Forwarding or somthing other is wrong. i cant login/connect over the www to some PCs.
Iam Back to 15747 this run fine.
I'm having the same issue - none of my port forwards are working. I didn't have this issue until I updated to build 15747 and I'm still having the issue with 15778. Before build 15747 I hadn't updated in probably 5 or 6 months. I always do 30/30/30 before and (10 mins) after flashing and I always reconfigure settings manually - no scripts. I'm running a static IP and using portforward.com and grc.com to test that the ports are not forwarding. Other than that everything seems to be working fine for me.
ETA: My router is a Linksys WRT600N v1.1 and I'm running the mini build.
Joined: 06 Feb 2010 Posts: 7401 Location: Little Rock
Posted: Tue Nov 23, 2010 9:46 Post subject:
mastacontrola wrote:
My router is the Linksys E3000 running the Mega build, but also tested the big build.
Enik wrote:
mastacontrola wrote:
I, too, am having the same problems. I think this build the Port Forwarding became broken. Everything else seems to work fine. If I revert to an earlier version, everything as far as port forwarding gets corrected. This may be a bug in the build. It shows all the proper port forwards, but will not route to the IP as if it was turned off.
HelloAndroid wrote:
Hello
i flash 15778-big it on Asus RT-N16.
I have Problem with the Port Forwarding or somthing other is wrong. i cant login/connect over the www to some PCs.
Iam Back to 15747 this run fine.
I'm having the same issue - none of my port forwards are working. I didn't have this issue until I updated to build 15747 and I'm still having the issue with 15778. Before build 15747 I hadn't updated in probably 5 or 6 months. I always do 30/30/30 before and (10 mins) after flashing and I always reconfigure settings manually - no scripts. I'm running a static IP and using portforward.com and grc.com to test that the ports are not forwarding. Other than that everything seems to be working fine for me.
ETA: My router is a Linksys WRT600N v1.1 and I'm running the mini build.
Port forwards work for me, i have two single port entries on two machines that get static ip from routers's dhcp server, my wan connection is PPPoE. Shields Up reports that the ports are open and my p2p programs work fine (green status, uploading in progress).
Maybe the problem is on the web interface because i didn't used it to configure the port forward, instead i used nvram variables.
Quote:
nvram set forwardspec_entries="2"
nvram set forward_spec="Deluge:on:both:45000>192.168.1.100:45000 uTorrent:on:both:54451>192.168.1.101:54451"
Code:
iptables -t nat -vnL
looks fine _________________ WRT320N converted to E2000 : DD-WRT v24-sp2 (11/21/10) std-usb-nas - build 15778
Joined: 08 Jun 2006 Posts: 256 Location: Netherlands, Hengelo ov
Posted: Tue Nov 23, 2010 19:31 Post subject:
Confirmed, port forwarding is not working on firmware dd-wrt.v24-15778_NEWD-2_K2.6_big. Port forwarding is working on firmware dd-wrt.v24-15704_NEWD-2_K2.6_big. I use WRT320N.
_________________
1 E3000 AND 1 E2000 WPA2 AES
DD-WRT v3.0-r31277
Joined: 08 Jun 2006 Posts: 247 Location: Prince Edward Island - Canada
Posted: Wed Nov 24, 2010 1:17 Post subject:
redhawk0 wrote:
I just checked it again.
K26 mega build the port forwarding for 15704 works....and 15778 it doesn't work.
redhawk
Just checked here .. E3000 (converted) mega 15778, port forwarding works fine. Are you using limited SSH or Telnet access on the security page? (Wondering if iptables has issues on your router.)
I just checked on my wrt320n running k2.6 big 15778 and port forwarding worked fine.
Are you guys accidentally filling in the source net? It's a new option that restricts what remote sources can access the port forward so you should leave it empty if you want it to allow every source.
If you encounter the problem could you please post the usual info plus the output of these two commands.
iptables -t nat -vnL PREROUTING
iptables -vnL FORWARD _________________ Read the forum announcements thoroughly! Be cautious if you're inexperienced.
Available for paid consulting. (Don't PM about complicated setups otherwise)
Looking for bricks and spare routers to expand my collection. (not interested in G spec models)