Posted: Mon Mar 07, 2011 15:56 Post subject: wrt54g nocatsplash help
ok i have a wrt54g ver2.2 flashed with dd-wrt ver 24 pre SP2 build 13064 , i enabled jffs2 and i have no space 192/0 used/free. when i winscp into the box i cannot change or make new files or its spotty where i can write, probably because my box have no space, i get that, but i would asume that when i enabled nocatsplacsh i would get a default page when browsing my wifi , no luck there so i was able to mod the splash.html with some chages and still nothing. so i typed splashd in the command line via ssh and i get an error could not start spashd.conf could not be found plus the path i cant remember im not home at the moment.so imodded the box with a 65 mb microsd card and enabled mmc support and all was good there 64/64 used/free. so now i have space , but was still running into issues. so i tryed to put a couple commands in startup on the gui. mount --bind /mmc/jffs /jffs and nvram set sys_enable_jffs2=1
so now my jffs2 says 64/64 used free, so i thought i was all set now but i still cannot change or acces some files. nor get catsplash to work ,, does anyone have experience with doing this on a wrt54g 2.2